Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LT1055CN8#PBF

Analog Devices · FET InputAmplifiers · PDIP-8

LT1055CN8#PBF from Analog Devices, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 BAL passive Offset null terminal; a 100k potentiometer between BAL pins 1 and 5 with the wiper tied to V+ gives an offset adjustment range of ±5 mV.
2 -IN input Inverting input; the input voltage range is ±11 V minimum (±12 V typical) at ±15 V supplies and the absolute maximum input voltage is ±20 V.
3 +IN input Non-inverting input; the input voltage range is ±11 V minimum (±12 V typical) at ±15 V supplies and the absolute maximum input voltage is ±20 V.
4 V- power_in Negative supply; the absolute maximum supply voltage is ±20 V and PSRR is specified for VS = ±10 V to ±18 V.
5 BAL passive Second offset null terminal, used together with pin 1 in the 100k potentiometer trim network whose wiper is tied to V+.
6 OUT output Amplifier output; output voltage swing is ±12 V minimum into RL = 2 kΩ and the output short-circuit duration is indefinite.
7 V+ power_in Positive supply; the absolute maximum supply voltage is ±20 V and this pin is the wiper tie point for the offset null potentiometer.
8 N/C unconnected No internal connection.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package PDIP-8
Category Amplifiers
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Offset Voltage, LT1055 N8 package VOS 70 120 µV TA=25°C, VS=±15V, VCM=0V; Note 2 (warmed up) 3
Input Offset Voltage, LT1056 N8 package VOS 70 140 µV TA=25°C, VS=±15V, VCM=0V; Note 2 (warmed up) 3
Input Offset Current IOS 2 20 pA Fully warmed up 3
Input Bias Current IB -50 10 50 pA Fully warmed up; printed as ±10 typ, ±50 max 3
Input Bias Current IB 30 150 pA VCM = 10V 3
Large-Signal Voltage Gain AVOL 120 400 V/mV VO = ±10V, RL = 2k 3
Large-Signal Voltage Gain AVOL 100 300 V/mV VO = ±10V, RL = 1k 3
Input Voltage Range VCM -11 12 11 V Printed as ±11 min, ±12 typ 3
Common Mode Rejection Ratio CMRR 83 98 dB VCM = ±11V 3
Power Supply Rejection Ratio PSRR 88 104 dB VS = ±10V to ±18V 3
Output Voltage Swing VOUT 12 13.2 V RL = 2k; printed as ±12 min, ±13.2 typ 3
Slew Rate, LT1055 SR 7.5 12 V/µs LT1055 (AV = 1 test conditions not printed in table) 3
Slew Rate, LT1056 SR 9 14 V/µs LT1056 3
Gain Bandwidth Product, LT1055 GBW 4.5 MHz f = 1MHz 3
Gain Bandwidth Product, LT1056 GBW 5.5 MHz f = 1MHz 3
Supply Current, LT1055 IS 2.8 5 mA LT1055 3
Supply Current, LT1056 IS 4 7 mA LT1056 3
Offset Voltage Adjustment Range -5 5 mV RPOT = 100k 3
Input Capacitance CIN 4 pF 3
Input Noise Voltage Density, LT1055/LT1056 en 30 60 nV/√Hz fO = 10Hz (Note 3) 3
Input Noise Voltage Density, LT1055/LT1056 en 15 22 nV/√Hz fO = 1kHz (Note 4) 3
Input Noise Current Density in 1.8 4 fA/√Hz fO = 10Hz, 1kHz (Note 5) 3
Input Offset Current, TA = 70°C, LT1055 IOS 16 80 pA Warmed up, TA = 70°C, 0°C to 70°C range 4
Input Offset Current, TA = 70°C, LT1056 IOS 18 100 pA Warmed up, TA = 70°C, 0°C to 70°C range 4
Input Bias Current, TA = 70°C, LT1055 IB -200 40 200 pA Warmed up, TA = 70°C, 0°C to 70°C range; printed ±40 typ, ±200 max 4
Input Bias Current, TA = 70°C, LT1056 IB -240 50 240 pA Warmed up, TA = 70°C, 0°C to 70°C range; printed ±50 typ, ±240 max 4
Large-Signal Voltage Gain, 0°C to 70°C AVOL 60 250 V/mV VO = ±10V, RL = 2k, 0°C ≤ TA ≤ 70°C 4
Common Mode Rejection Ratio, 0°C to 70°C CMRR 82 98 dB VCM = ±10.5V, 0°C ≤ TA ≤ 70°C 4
Power Supply Rejection Ratio, 0°C to 70°C PSRR 87 103 dB VS = ±10V to ±18V, 0°C ≤ TA ≤ 70°C 4
Output Voltage Swing, 0°C to 70°C VOUT 12 13.1 V RL = 2k, 0°C ≤ TA ≤ 70°C; printed as ±12 min, ±13.1 typ 4
Average Temperature Coefficient of Input Offset Voltage, N8 8 12 µV/°C N8 package, 0°C ≤ TA ≤ 70°C (Note 6) 4
Supply Voltage (absolute maximum) V+ / V- -20 20 V Supply voltage 2
Differential Input Voltage (absolute maximum) -40 40 V 2
Input Voltage (absolute maximum) -20 20 V 2
Operating Temperature Range, LT1055CN8/LT1056CN8 TA 0 70 °C LT1055AC/LT1055C/LT1056AC/LT1056C grade 2
Storage Temperature Range TSTG -65 150 °C All devices 2
Lead Temperature (Soldering, 10 sec) 300 °C 10 seconds 2
Maximum Junction Temperature TJMAX 150 °C N8 package 2
Thermal Resistance, Junction-to-Ambient θJA 130 °C/W N8 8-lead PDIP 2

CAD (KiCad official)

  • Symbol: LT1055CN8#PBF
  • Footprint: Package_DIP:DIP-8_W7.62mm
  • 3D model: PDIP-8 (KiCad packages3D, STEP)
  • 3D model files: lt1055cn8-etched.step / lt1055cn8-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt1055cn8.step / lt1055cn8.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (20 pp, sha256 a28f55226320eb34, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF