Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MCP3564RT-E/NC

Microchip Tech · Analog To Digital Converters (ADCs) · UQFN-20-EP(3x3)

MCP3564RT-E from Microchip Tech, in a UQFN-20-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 REFIN- input Inverting differential reference input (VREF-); connect directly to AGND for single-ended reference applications, with 0.6V ≤ VREF ≤ AVDD.
2 REFIN+/OUT bidirectional Non-inverting reference input (VREF+) when VREF_SEL = 0, or internal voltage reference output when VREF_SEL = 1; bypass to AGND with 0.1 µF and 10 µF ceramic capacitors.
3 CH0 input Analog input 0, multiplexed to VIN+ or VIN-; pin voltage range is AGND - 0.1V to VDD + 0.1V.
4 CH1 input Analog input 1, multiplexed to VIN+ or VIN-; pin voltage range is AGND - 0.1V to VDD + 0.1V.
5 CH2 input Analog input 2, multiplexed to VIN+ or VIN-; pin voltage range is AGND - 0.1V to VDD + 0.1V.
6 CH3 input Analog input 3, multiplexed to VIN+ or VIN-; pin voltage range is AGND - 0.1V to VDD + 0.1V.
7 CH4 input Analog input 4, multiplexed to VIN+ or VIN-; pin voltage range is AGND - 0.1V to VDD + 0.1V.
8 CH5 input Analog input 5, multiplexed to VIN+ or VIN-; pin voltage range is AGND - 0.1V to VDD + 0.1V.
9 CH6 input Analog input 6, multiplexed to VIN+ or VIN-; pin voltage range is AGND - 0.1V to VDD + 0.1V.
10 CH7 input Analog input 7, multiplexed to VIN+ or VIN-; pin voltage range is AGND - 0.1V to VDD + 0.1V.
11 CS input Schmitt-trigger SPI chip select; falling edge starts and rising edge ends a communication, and no communication occurs while high.
12 SCK input Schmitt-trigger SPI clock input, up to 20 MHz, supporting SPI modes 0,0 and 1,1; data latched on rising edge and shifted out on falling edge.
13 SDI input Schmitt-trigger SPI data input that carries the command byte after the CS falling edge followed by data; clocked in on SCK rising edge.
14 SDO tri_state SPI data output clocked out on SCK falling edge; high-impedance when CS is high, during write or Fast command data, or when the device address does not match.
15 IRQ/MDAT output Interrupt output or modulator data output selected by IRQ_MODE[1]; inactive state is high-Z or logic high, and high-Z requires an external pull-up to DVDD (100-200 kΩ typical).
16 MCLK bidirectional Master clock input or analog master clock (AMCLK) output per CLK_SEL[1:0]; typical clock frequency is 4.9152 MHz.
17 DGND power_in Digital ground; must be connected externally to the same ground as AGND, preferably with a star connection, as it is not internally connected to AGND.
18 DVDD power_in Digital supply, 1.8V to 3.6V, decoupled with 10 µF in parallel with 0.1 µF ceramic capacitors and monitored by the DVDD POR circuit.
19 AVDD power_in Analog supply, 2.7V to 3.6V, decoupled with 10 µF in parallel with 0.1 µF ceramic capacitors and monitored by the AVDD POR circuit.
20 AGND power_in Analog ground; must be connected to the same ground as DGND, preferably with a star connection, as it is not internally connected to DGND.
21 EP power_in Exposed thermal pad internally connected to AGND; should be connected to PCB analog ground for optimal accuracy and thermal performance, but can be left floating if necessary.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package UQFN-20-EP(3x3)
Category Data Converters
Pins 21

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Analog Operating Voltage AVDD 2.7 3.6 V 6
Digital Operating Voltage DVDD 1.8 3.6 V AVDD + 0.1V upper limit, DVDD ≤ 3.6V 6
Analog Operating Current AIDD 0.56 0.81 mA BOOST[1:0] = 00, 0.5x 6
Analog Operating Current AIDD 0.69 0.96 mA BOOST[1:0] = 01, 0.66x 6
Analog Operating Current AIDD 0.93 1.3 mA BOOST[1:0] = 10, 1x 6
Analog Operating Current AIDD 1.65 2.2 mA BOOST[1:0] = 11, 2x 6
Analog Operating Current, internal VREF AIDD 0.96 mA BOOST[1:0] = 00, 0.5x, VREF = 2.4V internal 6
Analog Operating Current, internal VREF AIDD 1.2 mA BOOST[1:0] = 01, 0.66x, VREF = 2.4V internal 6
Analog Operating Current, internal VREF AIDD 1.6 mA BOOST[1:0] = 10, 1x, VREF = 2.4V internal 6
Analog Operating Current, internal VREF AIDD 2.5 mA BOOST[1:0] = 11, 2x, VREF = 2.4V internal 6
Digital Operating Current DIDD 0.25 0.37 mA (Note 8) 6
Analog Partial Shutdown Current AIDDS_PS 22 µA CONFIG0 = 0x00 6
Digital Partial Shutdown Current DIDDS_PS 17 µA CONFIG0 = 0x00 6
Analog Full Shutdown Current AIDDS_FS 0.4 µA CONFIG0 = 0x00 with Full-Shutdown Fast-CMD 6
Digital Full Shutdown Current DIDDS_FS 2 µA CONFIG0 = 0x00 with Full-Shutdown Fast-CMD 6
Internal VREF Absolute Voltage IVREF -2 2 % VREF_SEL = 1, TA = +25°C only; nominal 2.4 V 7
Internal VREF Temperature Coefficient (Extended) TCREFE 15 40 ppm/°C TA = -40°C to +125°C (Note 2) 7
Internal VREF Temperature Coefficient (Industrial) TCREFI 9 40 ppm/°C TA = -40°C to +85°C (Note 2) 7
Voltage Reference Buffer Short Circuit Current IREF_SC 8 mA REFIN+/OUT shorted to AGND, VREF_SEL = 1, (Note 9) 7
Input Voltage at Input Pin CHN -0.1 V AGND, 0.1 to AVDD + 0.1, measured with respect to AGND 7
Input Voltage at Input Pin CHN (max) 0.1 V AVDD + 0.1, measured with respect to AGND 7
Reference Voltage Range VREF 0.6 3.6 V VREF_SEL = 0; max printed as AVDD 8
Gain Error GE -3 3 % (Note 6) 8
Offset Error VOS -900 900 µV AZ_MUX = 0, values /GAIN (Note 6) 8
Offset Error Temperature Coefficient VOS_DRIFT 70 300 nV/°C AZ_MUX = 0, values /GAIN (Notes 2, 6) 8
Offset Error Temperature Coefficient VOS_DRIFT 4 16 nV/°C AZ_MUX = 1, values /GAIN (Notes 2, 6) 8
Gain Error Temperature Coefficient GE_DRIFT 0.5 2 ppm/°C GAIN: 1x, 2x, 4x (Note 2) 8
Gain Error Temperature Coefficient GE_DRIFT 1 4 ppm/°C GAIN: 8x (Note 2) 8
Gain Error Temperature Coefficient GE_DRIFT 2 8 ppm/°C GAIN: 0.33x, 16x (Note 2) 8
Integral Nonlinearity INL -10 10 ppm FSR GAIN = 0.33x (Note 2) 8
Integral Nonlinearity INL -7 7 ppm FSR GAIN = 1x (Note 2) 8
Integral Nonlinearity INL -20 20 ppm FSR GAIN = 8x (Note 2) 8
Integral Nonlinearity INL -32 32 ppm FSR GAIN = 16x (Note 2) 8
No Missing Code Resolution Resolution 24 Bits OSR ≥ 256 (Note 1) 8
Signal-to-Noise and Distortion Ratio SINAD 105.8 106.7 dB AVDD = DVDD =VREF = 3.3V and TA = +25°C (Note 2) 9
Signal-to-Noise and Distortion Ratio SINAD 98.1 99.4 dB AVDD = DVDD = 3.3V, VREF = 2.4V internal, bypass capacitor 0.1 µF and TA = +25°C (Note 2) 9
Signal-to-Noise Ratio SNR 106.7 107.2 dBc AVDD = DVDD =VREF = 3.3V and TA = +25°C (Note 2) 9
Signal-to-Noise Ratio SNR 98.5 99.8 dBc AVDD = DVDD = 3.3V, VREF = 2.4V internal, bypass capacitor 0.1 µF and TA = +25°C (Note 2) 9
Total Harmonic Distortion THD -116 -111 dB AVDD = DVDD =VREF = 3.3V and TA = +25°C, first 10 harmonics (Note 2) 9
Total Harmonic Distortion THD -110 -105 dB AVDD = DVDD = 3.3V, VREF = 2.4V internal, bypass capacitor 0.1 µF and TA = +25°C, first 10 harmonics (Note 2) 9
Spurious-Free Dynamic Range SFDR 110 120 dBc AVDD = DVDD =VREF = 3.3V and TA = +25°C (Note 2) 9
Spurious-Free Dynamic Range SFDR 108 113 dBc AVDD = DVDD = 3.3V, VREF = 2.4V internal, bypass capacitor 0.1 µF and TA = +25°C (Note 2) 9
Data Transfer Time to DR tDODR 50 ns 10
Modulator Output Valid from AMCLK High tDOMDAT 100 ns 2.7V ≤ DVDD ≤ 3.6V 10
Master Clock Input Frequency Range fMCLK_EXT 1 20 MHz DVDD ≥ 2.7V 10
Master Clock Input Frequency Range fMCLK_EXT 1 10 MHz DVDD < 2.7V 10
Master Clock Input Duty Cycle fMCLK_DUTY 45 55 % 10
Internal Master Clock Frequency fMCLK_INT 3.3 6.6 MHz CLK_SEL[1] = 1 10
Serial Clock Frequency fSCK 20 MHz DVDD = 2.7V to 3.6V, CLOAD = 30 pF 12
CS Setup Time tCSS 25 ns DVDD = 2.7V to 3.6V 12
CS Hold Time tCSH 50 ns DVDD = 2.7V to 3.6V 12
Output Valid from SCK Low tDO 25 ns DVDD = 2.7V to 3.6V 12
Digital Supply and Analog Supply Absolute Maximum DVDD, AVDD -0.3 4 V 5
Analog Inputs w.r.t. AGND -0.3 V -0.3V to AVDD + 0.3V 5
Storage Temperature -65 150 °C 5
Maximum Junction Temperature TJ 150 °C 5
Operating Temperature Range TA -40 125 °C 11
Thermal Resistance, 20-Lead UQFN θJA 50 °C/W 11

CAD (KiCad official)

  • Symbol: MCP3564RT-E
  • Footprint: Package_DFN_QFN:UQFN-20-1EP_3x3mm_P0.4mm_EP1.85x1.85mm
  • 3D model: UQFN-20-EP(3x3) (KiCad packages3D, STEP)
  • 3D model files: mcp3564rt-e-etched.step / mcp3564rt-e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp3564rt-e.step / mcp3564rt-e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (116 pp, sha256 a8989732e1be11cc, retrieved 2026-10-23, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

Other parts in this family

This page is MCP3564RT-E/NC. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:

  • MCP3564RT-E/ST