Generated by kicad-footprint-generator · KiCad file format 20260206
MCP3564RT-E/NC
Microchip Tech · Analog To Digital Converters (ADCs) · UQFN-20-EP(3x3)
MCP3564RT-E from Microchip Tech, in a UQFN-20-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | REFIN- | input | Inverting differential reference input (VREF-); connect directly to AGND for single-ended reference applications, with 0.6V ≤ VREF ≤ AVDD. |
| 2 | REFIN+/OUT | bidirectional | Non-inverting reference input (VREF+) when VREF_SEL = 0, or internal voltage reference output when VREF_SEL = 1; bypass to AGND with 0.1 µF and 10 µF ceramic capacitors. |
| 3 | CH0 | input | Analog input 0, multiplexed to VIN+ or VIN-; pin voltage range is AGND - 0.1V to VDD + 0.1V. |
| 4 | CH1 | input | Analog input 1, multiplexed to VIN+ or VIN-; pin voltage range is AGND - 0.1V to VDD + 0.1V. |
| 5 | CH2 | input | Analog input 2, multiplexed to VIN+ or VIN-; pin voltage range is AGND - 0.1V to VDD + 0.1V. |
| 6 | CH3 | input | Analog input 3, multiplexed to VIN+ or VIN-; pin voltage range is AGND - 0.1V to VDD + 0.1V. |
| 7 | CH4 | input | Analog input 4, multiplexed to VIN+ or VIN-; pin voltage range is AGND - 0.1V to VDD + 0.1V. |
| 8 | CH5 | input | Analog input 5, multiplexed to VIN+ or VIN-; pin voltage range is AGND - 0.1V to VDD + 0.1V. |
| 9 | CH6 | input | Analog input 6, multiplexed to VIN+ or VIN-; pin voltage range is AGND - 0.1V to VDD + 0.1V. |
| 10 | CH7 | input | Analog input 7, multiplexed to VIN+ or VIN-; pin voltage range is AGND - 0.1V to VDD + 0.1V. |
| 11 | CS | input | Schmitt-trigger SPI chip select; falling edge starts and rising edge ends a communication, and no communication occurs while high. |
| 12 | SCK | input | Schmitt-trigger SPI clock input, up to 20 MHz, supporting SPI modes 0,0 and 1,1; data latched on rising edge and shifted out on falling edge. |
| 13 | SDI | input | Schmitt-trigger SPI data input that carries the command byte after the CS falling edge followed by data; clocked in on SCK rising edge. |
| 14 | SDO | tri_state | SPI data output clocked out on SCK falling edge; high-impedance when CS is high, during write or Fast command data, or when the device address does not match. |
| 15 | IRQ/MDAT | output | Interrupt output or modulator data output selected by IRQ_MODE[1]; inactive state is high-Z or logic high, and high-Z requires an external pull-up to DVDD (100-200 kΩ typical). |
| 16 | MCLK | bidirectional | Master clock input or analog master clock (AMCLK) output per CLK_SEL[1:0]; typical clock frequency is 4.9152 MHz. |
| 17 | DGND | power_in | Digital ground; must be connected externally to the same ground as AGND, preferably with a star connection, as it is not internally connected to AGND. |
| 18 | DVDD | power_in | Digital supply, 1.8V to 3.6V, decoupled with 10 µF in parallel with 0.1 µF ceramic capacitors and monitored by the DVDD POR circuit. |
| 19 | AVDD | power_in | Analog supply, 2.7V to 3.6V, decoupled with 10 µF in parallel with 0.1 µF ceramic capacitors and monitored by the AVDD POR circuit. |
| 20 | AGND | power_in | Analog ground; must be connected to the same ground as DGND, preferably with a star connection, as it is not internally connected to DGND. |
| 21 | EP | power_in | Exposed thermal pad internally connected to AGND; should be connected to PCB analog ground for optimal accuracy and thermal performance, but can be left floating if necessary. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | UQFN-20-EP(3x3) |
| Category | Data Converters |
| Pins | 21 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Analog Operating Voltage | AVDD | 2.7 | 3.6 | V | 6 | ||
| Digital Operating Voltage | DVDD | 1.8 | 3.6 | V | AVDD + 0.1V upper limit, DVDD ≤ 3.6V | 6 | |
| Analog Operating Current | AIDD | 0.56 | 0.81 | mA | BOOST[1:0] = 00, 0.5x | 6 | |
| Analog Operating Current | AIDD | 0.69 | 0.96 | mA | BOOST[1:0] = 01, 0.66x | 6 | |
| Analog Operating Current | AIDD | 0.93 | 1.3 | mA | BOOST[1:0] = 10, 1x | 6 | |
| Analog Operating Current | AIDD | 1.65 | 2.2 | mA | BOOST[1:0] = 11, 2x | 6 | |
| Analog Operating Current, internal VREF | AIDD | 0.96 | mA | BOOST[1:0] = 00, 0.5x, VREF = 2.4V internal | 6 | ||
| Analog Operating Current, internal VREF | AIDD | 1.2 | mA | BOOST[1:0] = 01, 0.66x, VREF = 2.4V internal | 6 | ||
| Analog Operating Current, internal VREF | AIDD | 1.6 | mA | BOOST[1:0] = 10, 1x, VREF = 2.4V internal | 6 | ||
| Analog Operating Current, internal VREF | AIDD | 2.5 | mA | BOOST[1:0] = 11, 2x, VREF = 2.4V internal | 6 | ||
| Digital Operating Current | DIDD | 0.25 | 0.37 | mA | (Note 8) | 6 | |
| Analog Partial Shutdown Current | AIDDS_PS | 22 | µA | CONFIG0 = 0x00 | 6 | ||
| Digital Partial Shutdown Current | DIDDS_PS | 17 | µA | CONFIG0 = 0x00 | 6 | ||
| Analog Full Shutdown Current | AIDDS_FS | 0.4 | µA | CONFIG0 = 0x00 with Full-Shutdown Fast-CMD | 6 | ||
| Digital Full Shutdown Current | DIDDS_FS | 2 | µA | CONFIG0 = 0x00 with Full-Shutdown Fast-CMD | 6 | ||
| Internal VREF Absolute Voltage | IVREF | -2 | 2 | % | VREF_SEL = 1, TA = +25°C only; nominal 2.4 V | 7 | |
| Internal VREF Temperature Coefficient (Extended) | TCREFE | 15 | 40 | ppm/°C | TA = -40°C to +125°C (Note 2) | 7 | |
| Internal VREF Temperature Coefficient (Industrial) | TCREFI | 9 | 40 | ppm/°C | TA = -40°C to +85°C (Note 2) | 7 | |
| Voltage Reference Buffer Short Circuit Current | IREF_SC | 8 | mA | REFIN+/OUT shorted to AGND, VREF_SEL = 1, (Note 9) | 7 | ||
| Input Voltage at Input Pin CHN | -0.1 | V | AGND, 0.1 to AVDD + 0.1, measured with respect to AGND | 7 | |||
| Input Voltage at Input Pin CHN (max) | 0.1 | V | AVDD + 0.1, measured with respect to AGND | 7 | |||
| Reference Voltage Range | VREF | 0.6 | 3.6 | V | VREF_SEL = 0; max printed as AVDD | 8 | |
| Gain Error | GE | -3 | 3 | % | (Note 6) | 8 | |
| Offset Error | VOS | -900 | 900 | µV | AZ_MUX = 0, values /GAIN (Note 6) | 8 | |
| Offset Error Temperature Coefficient | VOS_DRIFT | 70 | 300 | nV/°C | AZ_MUX = 0, values /GAIN (Notes 2, 6) | 8 | |
| Offset Error Temperature Coefficient | VOS_DRIFT | 4 | 16 | nV/°C | AZ_MUX = 1, values /GAIN (Notes 2, 6) | 8 | |
| Gain Error Temperature Coefficient | GE_DRIFT | 0.5 | 2 | ppm/°C | GAIN: 1x, 2x, 4x (Note 2) | 8 | |
| Gain Error Temperature Coefficient | GE_DRIFT | 1 | 4 | ppm/°C | GAIN: 8x (Note 2) | 8 | |
| Gain Error Temperature Coefficient | GE_DRIFT | 2 | 8 | ppm/°C | GAIN: 0.33x, 16x (Note 2) | 8 | |
| Integral Nonlinearity | INL | -10 | 10 | ppm FSR | GAIN = 0.33x (Note 2) | 8 | |
| Integral Nonlinearity | INL | -7 | 7 | ppm FSR | GAIN = 1x (Note 2) | 8 | |
| Integral Nonlinearity | INL | -20 | 20 | ppm FSR | GAIN = 8x (Note 2) | 8 | |
| Integral Nonlinearity | INL | -32 | 32 | ppm FSR | GAIN = 16x (Note 2) | 8 | |
| No Missing Code Resolution | Resolution | 24 | Bits | OSR ≥ 256 (Note 1) | 8 | ||
| Signal-to-Noise and Distortion Ratio | SINAD | 105.8 | 106.7 | dB | AVDD = DVDD =VREF = 3.3V and TA = +25°C (Note 2) | 9 | |
| Signal-to-Noise and Distortion Ratio | SINAD | 98.1 | 99.4 | dB | AVDD = DVDD = 3.3V, VREF = 2.4V internal, bypass capacitor 0.1 µF and TA = +25°C (Note 2) | 9 | |
| Signal-to-Noise Ratio | SNR | 106.7 | 107.2 | dBc | AVDD = DVDD =VREF = 3.3V and TA = +25°C (Note 2) | 9 | |
| Signal-to-Noise Ratio | SNR | 98.5 | 99.8 | dBc | AVDD = DVDD = 3.3V, VREF = 2.4V internal, bypass capacitor 0.1 µF and TA = +25°C (Note 2) | 9 | |
| Total Harmonic Distortion | THD | -116 | -111 | dB | AVDD = DVDD =VREF = 3.3V and TA = +25°C, first 10 harmonics (Note 2) | 9 | |
| Total Harmonic Distortion | THD | -110 | -105 | dB | AVDD = DVDD = 3.3V, VREF = 2.4V internal, bypass capacitor 0.1 µF and TA = +25°C, first 10 harmonics (Note 2) | 9 | |
| Spurious-Free Dynamic Range | SFDR | 110 | 120 | dBc | AVDD = DVDD =VREF = 3.3V and TA = +25°C (Note 2) | 9 | |
| Spurious-Free Dynamic Range | SFDR | 108 | 113 | dBc | AVDD = DVDD = 3.3V, VREF = 2.4V internal, bypass capacitor 0.1 µF and TA = +25°C (Note 2) | 9 | |
| Data Transfer Time to DR | tDODR | 50 | ns | 10 | |||
| Modulator Output Valid from AMCLK High | tDOMDAT | 100 | ns | 2.7V ≤ DVDD ≤ 3.6V | 10 | ||
| Master Clock Input Frequency Range | fMCLK_EXT | 1 | 20 | MHz | DVDD ≥ 2.7V | 10 | |
| Master Clock Input Frequency Range | fMCLK_EXT | 1 | 10 | MHz | DVDD < 2.7V | 10 | |
| Master Clock Input Duty Cycle | fMCLK_DUTY | 45 | 55 | % | 10 | ||
| Internal Master Clock Frequency | fMCLK_INT | 3.3 | 6.6 | MHz | CLK_SEL[1] = 1 | 10 | |
| Serial Clock Frequency | fSCK | 20 | MHz | DVDD = 2.7V to 3.6V, CLOAD = 30 pF | 12 | ||
| CS Setup Time | tCSS | 25 | ns | DVDD = 2.7V to 3.6V | 12 | ||
| CS Hold Time | tCSH | 50 | ns | DVDD = 2.7V to 3.6V | 12 | ||
| Output Valid from SCK Low | tDO | 25 | ns | DVDD = 2.7V to 3.6V | 12 | ||
| Digital Supply and Analog Supply Absolute Maximum | DVDD, AVDD | -0.3 | 4 | V | 5 | ||
| Analog Inputs w.r.t. AGND | -0.3 | V | -0.3V to AVDD + 0.3V | 5 | |||
| Storage Temperature | -65 | 150 | °C | 5 | |||
| Maximum Junction Temperature | TJ | 150 | °C | 5 | |||
| Operating Temperature Range | TA | -40 | 125 | °C | 11 | ||
| Thermal Resistance, 20-Lead UQFN | θJA | 50 | °C/W | 11 |
CAD (KiCad official)
- Symbol:
MCP3564RT-E - Footprint:
Package_DFN_QFN:UQFN-20-1EP_3x3mm_P0.4mm_EP1.85x1.85mm - 3D model: UQFN-20-EP(3x3) (KiCad packages3D, STEP)
- 3D model files:
mcp3564rt-e-etched.step/mcp3564rt-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp3564rt-e.step/mcp3564rt-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (116 pp, sha256
a8989732e1be11cc, retrieved 2026-10-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
Other parts in this family
This page is MCP3564RT-E/NC. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- MCP3564RT-E/ST