main
Ray Publish 0.1.1 693eae5
{
  "slug": "mcp3564rt-e-nc",
  "version": "0.1.1",
  "type": "component",
  "description": "Microchip Tech Analog To Digital Converters (ADCs), UQFN-20-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "data converters",
    "mcp3564rt-e",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "mcp3564rt-e.kicad_sym",
    "mcp3564rt-e.kicad_mod",
    "mcp3564rt-e.glb",
    "mcp3564rt-e.step",
    "mcp3564rt-e.lbr",
    "docs/hero.png",
    "docs/mcp3564rt-e-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "mcp3564rt-e-hero.glb",
    "mcp3564rt-e-hero.overlay.json",
    "mcp3564rt-e-etched.glb",
    "mcp3564rt-e-etched.step",
    "mcp3564rt-e-nc-hero.glb",
    "mcp3564rt-e-nc-hero.overlay.json"
  ],
  "component": {
    "mpn": "MCP3564RT-E/NC",
    "manufacturer": "Microchip Tech",
    "package": "UQFN-20-EP(3x3)",
    "pin_count": 21,
    "category": "Data Converters",
    "subcategory": "Analog To Digital Converters (ADCs)",
    "datasheet": "https://ww1.microchip.com/downloads/aemDocuments/documents/APID/ProductDocuments/DataSheets/MCP3561_2_4R-Data-Sheet-DS200006391C.pdf",
    "parts": {
      "symbol": "mcp3564rt-e.kicad_sym",
      "footprint": "mcp3564rt-e.kicad_mod",
      "model_3d": "mcp3564rt-e-nc-hero.glb",
      "model_3d_plain": "mcp3564rt-e-etched.glb",
      "model_3d_step": "mcp3564rt-e-etched.step",
      "model_3d_step_plain": "mcp3564rt-e.step",
      "lbr": "mcp3564rt-e.lbr"
    },
    "distributor_links": {
      "lcsc": "C1518044"
    },
    "distributor_check": {
      "checked_at": "2026-10-23T12:35:35Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "REFIN-",
        "type": "input",
        "description": "Inverting differential reference input (VREF-); connect directly to AGND for single-ended reference applications, with 0.6V ≤ VREF ≤ AVDD."
      },
      {
        "number": "2",
        "name": "REFIN+/OUT",
        "type": "bidirectional",
        "description": "Non-inverting reference input (VREF+) when VREF_SEL = 0, or internal voltage reference output when VREF_SEL = 1; bypass to AGND with 0.1 µF and 10 µF ceramic capacitors."
      },
      {
        "number": "3",
        "name": "CH0",
        "type": "input",
        "description": "Analog input 0, multiplexed to VIN+ or VIN-; pin voltage range is AGND - 0.1V to VDD + 0.1V."
      },
      {
        "number": "4",
        "name": "CH1",
        "type": "input",
        "description": "Analog input 1, multiplexed to VIN+ or VIN-; pin voltage range is AGND - 0.1V to VDD + 0.1V."
      },
      {
        "number": "5",
        "name": "CH2",
        "type": "input",
        "description": "Analog input 2, multiplexed to VIN+ or VIN-; pin voltage range is AGND - 0.1V to VDD + 0.1V."
      },
      {
        "number": "6",
        "name": "CH3",
        "type": "input",
        "description": "Analog input 3, multiplexed to VIN+ or VIN-; pin voltage range is AGND - 0.1V to VDD + 0.1V."
      },
      {
        "number": "7",
        "name": "CH4",
        "type": "input",
        "description": "Analog input 4, multiplexed to VIN+ or VIN-; pin voltage range is AGND - 0.1V to VDD + 0.1V."
      },
      {
        "number": "8",
        "name": "CH5",
        "type": "input",
        "description": "Analog input 5, multiplexed to VIN+ or VIN-; pin voltage range is AGND - 0.1V to VDD + 0.1V."
      },
      {
        "number": "9",
        "name": "CH6",
        "type": "input",
        "description": "Analog input 6, multiplexed to VIN+ or VIN-; pin voltage range is AGND - 0.1V to VDD + 0.1V."
      },
      {
        "number": "10",
        "name": "CH7",
        "type": "input",
        "description": "Analog input 7, multiplexed to VIN+ or VIN-; pin voltage range is AGND - 0.1V to VDD + 0.1V."
      },
      {
        "number": "11",
        "name": "CS",
        "type": "input",
        "description": "Schmitt-trigger SPI chip select; falling edge starts and rising edge ends a communication, and no communication occurs while high."
      },
      {
        "number": "12",
        "name": "SCK",
        "type": "input",
        "description": "Schmitt-trigger SPI clock input, up to 20 MHz, supporting SPI modes 0,0 and 1,1; data latched on rising edge and shifted out on falling edge."
      },
      {
        "number": "13",
        "name": "SDI",
        "type": "input",
        "description": "Schmitt-trigger SPI data input that carries the command byte after the CS falling edge followed by data; clocked in on SCK rising edge."
      },
      {
        "number": "14",
        "name": "SDO",
        "type": "tri_state",
        "description": "SPI data output clocked out on SCK falling edge; high-impedance when CS is high, during write or Fast command data, or when the device address does not match."
      },
      {
        "number": "15",
        "name": "IRQ/MDAT",
        "type": "output",
        "description": "Interrupt output or modulator data output selected by IRQ_MODE[1]; inactive state is high-Z or logic high, and high-Z requires an external pull-up to DVDD (100-200 kΩ typical)."
      },
      {
        "number": "16",
        "name": "MCLK",
        "type": "bidirectional",
        "description": "Master clock input or analog master clock (AMCLK) output per CLK_SEL[1:0]; typical clock frequency is 4.9152 MHz."
      },
      {
        "number": "17",
        "name": "DGND",
        "type": "power_in",
        "description": "Digital ground; must be connected externally to the same ground as AGND, preferably with a star connection, as it is not internally connected to AGND."
      },
      {
        "number": "18",
        "name": "DVDD",
        "type": "power_in",
        "description": "Digital supply, 1.8V to 3.6V, decoupled with 10 µF in parallel with 0.1 µF ceramic capacitors and monitored by the DVDD POR circuit."
      },
      {
        "number": "19",
        "name": "AVDD",
        "type": "power_in",
        "description": "Analog supply, 2.7V to 3.6V, decoupled with 10 µF in parallel with 0.1 µF ceramic capacitors and monitored by the AVDD POR circuit."
      },
      {
        "number": "20",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground; must be connected to the same ground as DGND, preferably with a star connection, as it is not internally connected to DGND."
      },
      {
        "number": "21",
        "name": "EP",
        "type": "power_in",
        "description": "Exposed thermal pad internally connected to AGND; should be connected to PCB analog ground for optimal accuracy and thermal performance, but can be left floating if necessary."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin table columns for MCP3561R/3562R/3564R are garbled in the extracted text. MCP3564R UQFN numberin; Pin types for REFIN-, REFIN+/OUT, SDO, IRQ/MDAT and MCLK were chosen from the described behavior. Th",
          "1/21 pins cited to the wrong page (name found elsewhere): ['21:EP@p32']"
        ],
        "pages_sent": 17,
        "cost_usd": 0.2072,
        "at": "2026-10-23T12:35:24"
      },
      "datasheet": {
        "url": "https://ww1.microchip.com/downloads/aemDocuments/documents/APID/ProductDocuments/DataSheets/MCP3561_2_4R-Data-Sheet-DS200006391C.pdf",
        "pages": 116,
        "sha256": "a8989732e1be11cc",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 21,
        "described": 21,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "mcp3564rt-e.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          3.0,
          0.52
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "0ee4e1082236390795238cd34b082d96efd160d6292c636cc40201a5a30cdc63",
        "checked": "2026-10-23",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "mcp3564rt-e-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          3.0,
          0.52
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "6b2f0203bb67fa4c461d3e32c2a462fa917e508d5576cd78b624d786eafc12da",
        "checked": "2026-10-23",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "family": {
      "base": "MCP3564RT-E",
      "siblings": [
        "MCP3564RT-E/ST"
      ],
      "old_slug": "mcp3564rt-e",
      "note": "renamed from the cut-base slug to the part it was built from (slug collision split, 2026-11-11)"
    }
  },
  "visibility": "public"
}