3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownMAX9728AEUD+
Analog Devices Inc Maxim Integrated · Audio Amplifiers · TSSOP-14
MAX9728AEUD+ from Analog Devices Inc Maxim Integrated, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTL | output | Left-channel headphone amplifier output. Ground-referenced (SGND) DirectDrive output; drives headphone loads (16Ω/32Ω) directly with no DC-blocking capacitor required. |
| 2 | VDD | power_in | Positive power-supply input, 4.5V to 5.5V. Bypass with a 1µF ceramic capacitor to PGND placed close to the pin. |
| 3 | C1P | passive | Charge-pump flying-capacitor positive terminal. Connect a 1µF ceramic capacitor between C1P and C1N. Part of the 270kHz charge pump that generates the negative rail PVSS. |
| 4 | PGND | power_in | Power ground for the charge-pump switches. Must be tied to SGND at a single point on the PCB. |
| 5 | C1N | passive | Charge-pump flying-capacitor negative terminal. Connect a 1µF ceramic capacitor from C1P to C1N. |
| 6 | N.C. | unconnected | No connection. Not internally connected; may be left floating or tied to ground for layout convenience. |
| 7 | PVSS | power_out | Charge-pump negative-supply output (approximately -VDD). Connect to SVSS externally and bypass to PGND with a 1µF ceramic hold capacitor (C2). |
| 8 | SHDN | input | Active-low shutdown input (CMOS-level: VIH ≥ 2V, VIL ≤ 0.8V). Drive low to disable both amplifiers and the charge pump (ISHDN < 0.1µA typ); drive high to enable. In shutdown the output impedance is 14kΩ‖RF. |
| 9 | INL | input | Left-channel inverting audio input. AC-couple through an external RIN input resistor (MAX9728A has adjustable gain Av = -RF/RIN); input impedance 15-25kΩ (19kΩ typ on MAX9728B). |
| 10 | SGND | power_in | Signal ground / audio return. Connect to PGND at a single star-ground point; keep audio signal traces separate from PGND switching-current traces. |
| 11 | INR | input | Right-channel inverting audio input. AC-couple through an external RIN input resistor for the MAX9728A adjustable-gain configuration. |
| 12 | SVSS | power_in | Amplifier negative-supply input. Connect externally to PVSS so both amplifiers share the charge-pump's negative rail. |
| 13 | N.C. | unconnected | No connection. Not internally connected; may be left floating. |
| 14 | OUTR | output | Right-channel headphone amplifier output. Ground-referenced DirectDrive output; up to 60mW into 32Ω, 42mW into 16Ω, THD+N = 0.02% at 50mW/32Ω. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc Maxim Integrated |
| Package | TSSOP-14 |
| Category | Amplifiers/Comparators |
| Pins | 14 |
Ordering variants
Same part, different packaging or reel option.
MAX9728AEUD+MAX9728AEUD+BEUD+MAX9728AEUD+AETC+MAX9728AEUD+BETC+
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage Range | VDD | 4.5 | 5.5 | V | 2 | ||
| Quiescent Current | ICC | 3.5 | 5.5 | mA | 2 | ||
| Shutdown Current | ISHDN | 1 | µA | SHDN = SGND = PGND | 2 | ||
| Shutdown to Full Operation | tSON | 180 | µs | 2 | |||
| Output Offset Voltage | VOS | -10 | 1.5 | 10 | mV | 2 | |
| Power-Supply Rejection Ratio | PSRR | 86 | dB | VDD = 4.5V to 5.5V | 2 | ||
| Power-Supply Rejection Ratio | PSRR | 80 | dB | f = 1kHz, 100mVP-P | 2 | ||
| Power-Supply Rejection Ratio | PSRR | 65 | dB | f = 20kHz, 100mVP-P | 2 | ||
| Output Power | POUT | 30 | 63 | mW | RL = 32Ω, THD+N = 1% | 2 | |
| Output Power | POUT | 42 | mW | RL = 16Ω, THD+N = 1% | 2 | ||
| Total Harmonic Distortion Plus Noise | THD+N | 0.003 | % | RL = 1kΩ, VOUT = 2VRMS, fIN = 1kHz | 2 | ||
| Total Harmonic Distortion Plus Noise | THD+N | 0.02 | % | RL = 32Ω, POUT = 50mW, fIN = 1kHz | 2 | ||
| Total Harmonic Distortion Plus Noise | THD+N | 0.04 | % | RL = 16Ω, POUT = 35mW, fIN = 1kHz | 2 | ||
| Signal-to-Noise Ratio | SNR | 102 | dB | RL = 1kΩ, VOUT = 2VRMS, BW = 22Hz to 22kHz | 3 | ||
| Signal-to-Noise Ratio | SNR | 105 | dB | RL = 1kΩ, VOUT = 2VRMS, A-weighted | 3 | ||
| Signal-to-Noise Ratio | SNR | 98 | dB | RL = 32Ω, POUT = 50mW, BW = 22Hz to 22kHz | 3 | ||
| Signal-to-Noise Ratio | SNR | 101 | dB | RL = 32Ω, POUT = 50mW, A-weighted | 3 | ||
| Slew Rate | SR | 0.5 | V/µs | 3 | |||
| Capacitive Drive | CL | 100 | pF | No sustained oscillations | 3 | ||
| Crosstalk | -70 | dB | L to R, R to L, f = 10kHz, RL = 16Ω, POUT = 15mW | 3 | |||
| Charge-Pump Oscillator Frequency | fOSC | 190 | 270 | 400 | kHz | 3 | |
| Click-and-Pop Level | KCP | -67 | dB | Into shutdown; RL = 32Ω, peak voltage, A-weighted, 32 samples per second (Note 5) | 3 | ||
| Click-and-Pop Level | KCP | -64 | dB | Out of shutdown; RL = 32Ω, peak voltage, A-weighted, 32 samples per second (Note 5) | 3 | ||
| Input Voltage High | VINH | 2 | V | SHDN input | 3 | ||
| Input Voltage Low | VINL | 0.8 | V | SHDN input | 3 | ||
| Input Leakage Current | -1 | 1 | µA | 3 | |||
| VDD to PGND | VDD | -0.3 | 6 | V | 2 | ||
| PVSS and SVSS to PGND | PVSS, SVSS | -6 | 0.3 | V | 2 | ||
| SHDN to GND | SHDN | -0.3 | 6 | V | 2 | ||
| Continuous Input Current (any other pin) | -20 | 20 | mA | 2 | |||
| Operating Temperature Range | TA | -40 | 85 | °C | 2 | ||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 2 | ||
| Junction Temperature | TJ | 150 | °C | 2 | |||
| Lead Temperature (soldering, 10s) | 300 | °C | 10s | 2 | |||
| Junction-to-Ambient Thermal Resistance, TSSOP | θJA | 110 | °C/W | TSSOP package | 8 |
CAD (KiCad official)
- Symbol:
MAX9728AEUD+ - Footprint:
Package_SO:TSSOP-14_4.4x5mm_P0.65mm - 3D model: TSSOP-14 (KiCad packages3D, STEP)
- 3D model files:
max9728aeud-etched.step/max9728aeud-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max9728aeud.step/max9728aeud.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices Inc Maxim Integrated datasheet (19 pp, sha256
1b31a452c168e104, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).