Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MAX9728AEUD+

Analog Devices Inc Maxim Integrated · Audio Amplifiers · TSSOP-14

MAX9728AEUD+ from Analog Devices Inc Maxim Integrated, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUTL output Left-channel headphone amplifier output. Ground-referenced (SGND) DirectDrive output; drives headphone loads (16Ω/32Ω) directly with no DC-blocking capacitor required.
2 VDD power_in Positive power-supply input, 4.5V to 5.5V. Bypass with a 1µF ceramic capacitor to PGND placed close to the pin.
3 C1P passive Charge-pump flying-capacitor positive terminal. Connect a 1µF ceramic capacitor between C1P and C1N. Part of the 270kHz charge pump that generates the negative rail PVSS.
4 PGND power_in Power ground for the charge-pump switches. Must be tied to SGND at a single point on the PCB.
5 C1N passive Charge-pump flying-capacitor negative terminal. Connect a 1µF ceramic capacitor from C1P to C1N.
6 N.C. unconnected No connection. Not internally connected; may be left floating or tied to ground for layout convenience.
7 PVSS power_out Charge-pump negative-supply output (approximately -VDD). Connect to SVSS externally and bypass to PGND with a 1µF ceramic hold capacitor (C2).
8 SHDN input Active-low shutdown input (CMOS-level: VIH ≥ 2V, VIL ≤ 0.8V). Drive low to disable both amplifiers and the charge pump (ISHDN < 0.1µA typ); drive high to enable. In shutdown the output impedance is 14kΩ‖RF.
9 INL input Left-channel inverting audio input. AC-couple through an external RIN input resistor (MAX9728A has adjustable gain Av = -RF/RIN); input impedance 15-25kΩ (19kΩ typ on MAX9728B).
10 SGND power_in Signal ground / audio return. Connect to PGND at a single star-ground point; keep audio signal traces separate from PGND switching-current traces.
11 INR input Right-channel inverting audio input. AC-couple through an external RIN input resistor for the MAX9728A adjustable-gain configuration.
12 SVSS power_in Amplifier negative-supply input. Connect externally to PVSS so both amplifiers share the charge-pump's negative rail.
13 N.C. unconnected No connection. Not internally connected; may be left floating.
14 OUTR output Right-channel headphone amplifier output. Ground-referenced DirectDrive output; up to 60mW into 32Ω, 42mW into 16Ω, THD+N = 0.02% at 50mW/32Ω.

Key specifications

Parameter Value
Manufacturer Analog Devices Inc Maxim Integrated
Package TSSOP-14
Category Amplifiers/Comparators
Pins 14

Ordering variants

Same part, different packaging or reel option.

  • MAX9728AEUD+
  • MAX9728AEUD+BEUD+
  • MAX9728AEUD+AETC+
  • MAX9728AEUD+BETC+

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage Range VDD 4.5 5.5 V 2
Quiescent Current ICC 3.5 5.5 mA 2
Shutdown Current ISHDN 1 µA SHDN = SGND = PGND 2
Shutdown to Full Operation tSON 180 µs 2
Output Offset Voltage VOS -10 1.5 10 mV 2
Power-Supply Rejection Ratio PSRR 86 dB VDD = 4.5V to 5.5V 2
Power-Supply Rejection Ratio PSRR 80 dB f = 1kHz, 100mVP-P 2
Power-Supply Rejection Ratio PSRR 65 dB f = 20kHz, 100mVP-P 2
Output Power POUT 30 63 mW RL = 32Ω, THD+N = 1% 2
Output Power POUT 42 mW RL = 16Ω, THD+N = 1% 2
Total Harmonic Distortion Plus Noise THD+N 0.003 % RL = 1kΩ, VOUT = 2VRMS, fIN = 1kHz 2
Total Harmonic Distortion Plus Noise THD+N 0.02 % RL = 32Ω, POUT = 50mW, fIN = 1kHz 2
Total Harmonic Distortion Plus Noise THD+N 0.04 % RL = 16Ω, POUT = 35mW, fIN = 1kHz 2
Signal-to-Noise Ratio SNR 102 dB RL = 1kΩ, VOUT = 2VRMS, BW = 22Hz to 22kHz 3
Signal-to-Noise Ratio SNR 105 dB RL = 1kΩ, VOUT = 2VRMS, A-weighted 3
Signal-to-Noise Ratio SNR 98 dB RL = 32Ω, POUT = 50mW, BW = 22Hz to 22kHz 3
Signal-to-Noise Ratio SNR 101 dB RL = 32Ω, POUT = 50mW, A-weighted 3
Slew Rate SR 0.5 V/µs 3
Capacitive Drive CL 100 pF No sustained oscillations 3
Crosstalk -70 dB L to R, R to L, f = 10kHz, RL = 16Ω, POUT = 15mW 3
Charge-Pump Oscillator Frequency fOSC 190 270 400 kHz 3
Click-and-Pop Level KCP -67 dB Into shutdown; RL = 32Ω, peak voltage, A-weighted, 32 samples per second (Note 5) 3
Click-and-Pop Level KCP -64 dB Out of shutdown; RL = 32Ω, peak voltage, A-weighted, 32 samples per second (Note 5) 3
Input Voltage High VINH 2 V SHDN input 3
Input Voltage Low VINL 0.8 V SHDN input 3
Input Leakage Current -1 1 µA 3
VDD to PGND VDD -0.3 6 V 2
PVSS and SVSS to PGND PVSS, SVSS -6 0.3 V 2
SHDN to GND SHDN -0.3 6 V 2
Continuous Input Current (any other pin) -20 20 mA 2
Operating Temperature Range TA -40 85 °C 2
Storage Temperature Range TSTG -65 150 °C 2
Junction Temperature TJ 150 °C 2
Lead Temperature (soldering, 10s) 300 °C 10s 2
Junction-to-Ambient Thermal Resistance, TSSOP θJA 110 °C/W TSSOP package 8

CAD (KiCad official)

  • Symbol: MAX9728AEUD+
  • Footprint: Package_SO:TSSOP-14_4.4x5mm_P0.65mm
  • 3D model: TSSOP-14 (KiCad packages3D, STEP)
  • 3D model files: max9728aeud-etched.step / max9728aeud-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max9728aeud.step / max9728aeud.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices Inc Maxim Integrated datasheet (19 pp, sha256 1b31a452c168e104, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF