Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LF351DT

STMicroelectronics · FET Input Amplifiers · SO-8

LF351DT from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Offset null 1 passive Offset null 1 input; used with offset null 2 and external potentiometer for input offset voltage trimming.
2 Inverting input input Inverting input terminal; input voltage limited to ±15V with respect to ground.
3 Non-inverting input input Non-inverting input terminal; input voltage limited to ±15V with respect to ground.
4 VCC− power_in Negative supply voltage terminal; rated ±18V absolute maximum.
5 Offset null 2 passive Offset null 2 input; used with offset null 1 and external potentiometer for input offset voltage trimming.
6 Output output Output terminal; short-circuit to ground or either supply voltage permitted indefinitely per absolute maximum ratings.
7 VCC+ power_in Positive supply voltage terminal; rated ±18V absolute maximum.
8 N.C. unconnected Not connected; no internal connection.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SO-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input offset voltage (Rs = 10kΩ) Vio 3 10 mV VCC = ±15 V, Tamb = +25°C; Rs = 10kΩ 4
Input offset voltage Vio 13 mV VCC = ±15 V; Tmin ≤ Tamb ≤ Tmax 4
Input offset current Iio 5 100 pA VCC = ±15 V, Tamb = +25°C 4
Input offset current Iio 4 nA VCC = ±15 V; Tmin ≤ Tamb ≤ Tmax 4
Input bias current Iib 20 200 pA VCC = ±15 V, Tamb = +25°C 4
Input bias current Iib 20 nA VCC = ±15 V; Tmin ≤ Tamb ≤ Tmax 4
Large signal voltage gain Avd 50 200 V/mV VCC = ±15 V, Tamb = +25°C; RL = 2kΩ, Vo = ±10V 4
Large signal voltage gain Avd 25 V/mV VCC = ±15 V; RL = 2kΩ, Vo = ±10V; Tmin ≤ Tamb ≤ Tmax 4
Supply voltage rejection ratio SVR 80 86 dB VCC = ±15 V, Tamb = +25°C; RS = 10kΩ 4
Supply voltage rejection ratio SVR 80 dB VCC = ±15 V; RS = 10kΩ; Tmin ≤ Tamb ≤ Tmax 4
Supply current, no load ICC 1.4 3.4 mA VCC = ±15 V, Tamb = +25°C; no load 4
Supply current, no load ICC 3.4 mA VCC = ±15 V; no load; Tmin ≤ Tamb ≤ Tmax 4
Input common mode voltage range Vicm -12 15 V VCC = ±15 V, Tamb = +25°C 4
Common mode rejection ratio CMR 70 86 dB VCC = ±15 V, Tamb = +25°C; RS = 10kΩ 4
Common mode rejection ratio CMR 70 dB VCC = ±15 V; RS = 10kΩ; Tmin ≤ Tamb ≤ Tmax 4
Output short-circuit current IOS 10 40 60 mA VCC = ±15 V, Tamb = +25°C 4
Output short-circuit current IOS 10 60 mA VCC = ±15 V; Tmin ≤ Tamb ≤ Tmax 4
Output voltage swing, RL = 2kΩ ±Vopp 10 12 V VCC = ±15 V, Tamb = +25°C; RL = 2kΩ 4
Output voltage swing, RL = 10kΩ ±Vopp 12 13.5 V VCC = ±15 V, Tamb = +25°C; RL = 10kΩ 4
Output voltage swing, RL = 2kΩ ±Vopp 10 V VCC = ±15 V; RL = 2kΩ; Tmin ≤ Tamb ≤ Tmax 4
Output voltage swing, RL = 10kΩ ±Vopp 12 V VCC = ±15 V; RL = 10kΩ; Tmin ≤ Tamb ≤ Tmax 4
Slew rate SR 12 16 V/µs Vi = 10V, RL = 2kΩ, CL = 100pF, unity gain 4
Gain bandwidth product GBP 2.5 4 MHz f = 100kHz, Vin = 10mV, RL = 2kΩ, CL = 100pF 4
Supply voltage VCC -18 18 V Voltages referenced to midpoint of VCC+ and VCC- 3
Input voltage Vi -15 15 V Must not exceed VCC or 15 V, whichever is less 3
Differential input voltage Vid -30 30 V Non-inverting input with respect to inverting input 3
Thermal resistance junction to ambient, SO-8 Rthja 125 °C/W SO-8; values are typical 3
Thermal resistance junction to case, SO-8 Rthjc 40 °C/W SO-8; values are typical 3
Storage temperature range Tstg -65 150 °C 3
ESD HBM 500 V Human body model 3
ESD MM 200 V Machine model 3
ESD CDM 1.5 kV Charged device model 3
Supply voltage VCC 6 32 V 3
Operating free-air temperature range, LF351 Toper 0 70 °C LF351 (0 to +70 °C column) 3

CAD (KiCad official)

  • Symbol: LF351DT
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SO-8 (KiCad packages3D, STEP)
  • 3D model files: lf351dt-etched.step / lf351dt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lf351dt.step / lf351dt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (14 pp, sha256 5ca7b3f0460898a1, retrieved 2026-09-22, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF