3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLF351DT
STMicroelectronics · FET Input Amplifiers · SO-8
LF351DT from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Offset null 1 | passive | Offset null 1 input; used with offset null 2 and external potentiometer for input offset voltage trimming. |
| 2 | Inverting input | input | Inverting input terminal; input voltage limited to ±15V with respect to ground. |
| 3 | Non-inverting input | input | Non-inverting input terminal; input voltage limited to ±15V with respect to ground. |
| 4 | VCC− | power_in | Negative supply voltage terminal; rated ±18V absolute maximum. |
| 5 | Offset null 2 | passive | Offset null 2 input; used with offset null 1 and external potentiometer for input offset voltage trimming. |
| 6 | Output | output | Output terminal; short-circuit to ground or either supply voltage permitted indefinitely per absolute maximum ratings. |
| 7 | VCC+ | power_in | Positive supply voltage terminal; rated ±18V absolute maximum. |
| 8 | N.C. | unconnected | Not connected; no internal connection. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SO-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage (Rs = 10kΩ) | Vio | 3 | 10 | mV | VCC = ±15 V, Tamb = +25°C; Rs = 10kΩ | 4 | |
| Input offset voltage | Vio | 13 | mV | VCC = ±15 V; Tmin ≤ Tamb ≤ Tmax | 4 | ||
| Input offset current | Iio | 5 | 100 | pA | VCC = ±15 V, Tamb = +25°C | 4 | |
| Input offset current | Iio | 4 | nA | VCC = ±15 V; Tmin ≤ Tamb ≤ Tmax | 4 | ||
| Input bias current | Iib | 20 | 200 | pA | VCC = ±15 V, Tamb = +25°C | 4 | |
| Input bias current | Iib | 20 | nA | VCC = ±15 V; Tmin ≤ Tamb ≤ Tmax | 4 | ||
| Large signal voltage gain | Avd | 50 | 200 | V/mV | VCC = ±15 V, Tamb = +25°C; RL = 2kΩ, Vo = ±10V | 4 | |
| Large signal voltage gain | Avd | 25 | V/mV | VCC = ±15 V; RL = 2kΩ, Vo = ±10V; Tmin ≤ Tamb ≤ Tmax | 4 | ||
| Supply voltage rejection ratio | SVR | 80 | 86 | dB | VCC = ±15 V, Tamb = +25°C; RS = 10kΩ | 4 | |
| Supply voltage rejection ratio | SVR | 80 | dB | VCC = ±15 V; RS = 10kΩ; Tmin ≤ Tamb ≤ Tmax | 4 | ||
| Supply current, no load | ICC | 1.4 | 3.4 | mA | VCC = ±15 V, Tamb = +25°C; no load | 4 | |
| Supply current, no load | ICC | 3.4 | mA | VCC = ±15 V; no load; Tmin ≤ Tamb ≤ Tmax | 4 | ||
| Input common mode voltage range | Vicm | -12 | 15 | V | VCC = ±15 V, Tamb = +25°C | 4 | |
| Common mode rejection ratio | CMR | 70 | 86 | dB | VCC = ±15 V, Tamb = +25°C; RS = 10kΩ | 4 | |
| Common mode rejection ratio | CMR | 70 | dB | VCC = ±15 V; RS = 10kΩ; Tmin ≤ Tamb ≤ Tmax | 4 | ||
| Output short-circuit current | IOS | 10 | 40 | 60 | mA | VCC = ±15 V, Tamb = +25°C | 4 |
| Output short-circuit current | IOS | 10 | 60 | mA | VCC = ±15 V; Tmin ≤ Tamb ≤ Tmax | 4 | |
| Output voltage swing, RL = 2kΩ | ±Vopp | 10 | 12 | V | VCC = ±15 V, Tamb = +25°C; RL = 2kΩ | 4 | |
| Output voltage swing, RL = 10kΩ | ±Vopp | 12 | 13.5 | V | VCC = ±15 V, Tamb = +25°C; RL = 10kΩ | 4 | |
| Output voltage swing, RL = 2kΩ | ±Vopp | 10 | V | VCC = ±15 V; RL = 2kΩ; Tmin ≤ Tamb ≤ Tmax | 4 | ||
| Output voltage swing, RL = 10kΩ | ±Vopp | 12 | V | VCC = ±15 V; RL = 10kΩ; Tmin ≤ Tamb ≤ Tmax | 4 | ||
| Slew rate | SR | 12 | 16 | V/µs | Vi = 10V, RL = 2kΩ, CL = 100pF, unity gain | 4 | |
| Gain bandwidth product | GBP | 2.5 | 4 | MHz | f = 100kHz, Vin = 10mV, RL = 2kΩ, CL = 100pF | 4 | |
| Supply voltage | VCC | -18 | 18 | V | Voltages referenced to midpoint of VCC+ and VCC- | 3 | |
| Input voltage | Vi | -15 | 15 | V | Must not exceed VCC or 15 V, whichever is less | 3 | |
| Differential input voltage | Vid | -30 | 30 | V | Non-inverting input with respect to inverting input | 3 | |
| Thermal resistance junction to ambient, SO-8 | Rthja | 125 | °C/W | SO-8; values are typical | 3 | ||
| Thermal resistance junction to case, SO-8 | Rthjc | 40 | °C/W | SO-8; values are typical | 3 | ||
| Storage temperature range | Tstg | -65 | 150 | °C | 3 | ||
| ESD HBM | 500 | V | Human body model | 3 | |||
| ESD MM | 200 | V | Machine model | 3 | |||
| ESD CDM | 1.5 | kV | Charged device model | 3 | |||
| Supply voltage | VCC | 6 | 32 | V | 3 | ||
| Operating free-air temperature range, LF351 | Toper | 0 | 70 | °C | LF351 (0 to +70 °C column) | 3 |
CAD (KiCad official)
- Symbol:
LF351DT - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
lf351dt-etched.step/lf351dt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lf351dt.step/lf351dt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (14 pp, sha256
5ca7b3f0460898a1, retrieved 2026-09-22, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).