Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TLV75101PDSQR

Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · WSON-10-EP(2x2)

TLV75101PDSQR from Texas Instruments, in a WSON-10-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 FB1 input Feedback input to control loop error amplifier for setting output voltage on adjustable version.
2 GND power_in Ground pin.
3 EN1 input Enable input; drive above VEN(HI) to enable regulator or below VEN(LO) to enter shutdown mode.
4 GND power_in Ground pin.
5 EN2 input Enable input; drive above VEN(HI) to enable regulator or below VEN(LO) to enter shutdown mode.
6 IN2 power_in Input supply pin; use ceramic capacitor from IN to ground for best transient response and minimized input impedance.
7 FB2 input Feedback input to control loop error amplifier for setting output voltage on adjustable version.
8 OUT2 power_out Regulated output voltage pin; capacitor required from OUT to ground for stability.
9 IN1 power_in Input supply pin; use ceramic capacitor from IN to ground for best transient response and minimized input impedance.
10 OUT1 power_out Regulated output voltage pin; capacitor required from OUT to ground for stability.
11 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WSON-10-EP(2x2)
Category Power Management (PMIC)
Pins 11

CAD (KiCad official)

  • Symbol: TLV75101PDSQR
  • Footprint: Package_DFN_QFN:Texas_DSQ0010A_WSON-10-1EP_2x2mm_P0.4mm_EP0.9x1.5mm
  • 3D model: WSON-10-EP(2x2) (KiCad packages3D, STEP)
  • 3D model files: tlv75101pdsqr-etched.step / tlv75101pdsqr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlv75101pdsqr.step / tlv75101pdsqr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (32 pp, sha256 c4d29cf923e325fc, retrieved 2026-09-24, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF