component
TLV75101PDSQR
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, WSON-10-EP(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTLV75101PDSQR
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · WSON-10-EP(2x2)
TLV75101PDSQR from Texas Instruments, in a WSON-10-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | FB1 | input | Feedback input to control loop error amplifier for setting output voltage on adjustable version. |
| 2 | GND | power_in | Ground pin. |
| 3 | EN1 | input | Enable input; drive above VEN(HI) to enable regulator or below VEN(LO) to enter shutdown mode. |
| 4 | GND | power_in | Ground pin. |
| 5 | EN2 | input | Enable input; drive above VEN(HI) to enable regulator or below VEN(LO) to enter shutdown mode. |
| 6 | IN2 | power_in | Input supply pin; use ceramic capacitor from IN to ground for best transient response and minimized input impedance. |
| 7 | FB2 | input | Feedback input to control loop error amplifier for setting output voltage on adjustable version. |
| 8 | OUT2 | power_out | Regulated output voltage pin; capacitor required from OUT to ground for stability. |
| 9 | IN1 | power_in | Input supply pin; use ceramic capacitor from IN to ground for best transient response and minimized input impedance. |
| 10 | OUT1 | power_out | Regulated output voltage pin; capacitor required from OUT to ground for stability. |
| 11 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-10-EP(2x2) |
| Category | Power Management (PMIC) |
| Pins | 11 |
CAD (KiCad official)
- Symbol:
TLV75101PDSQR - Footprint:
Package_DFN_QFN:Texas_DSQ0010A_WSON-10-1EP_2x2mm_P0.4mm_EP0.9x1.5mm - 3D model: WSON-10-EP(2x2) (KiCad packages3D, STEP)
- 3D model files:
tlv75101pdsqr-etched.step/tlv75101pdsqr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv75101pdsqr.step/tlv75101pdsqr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (32 pp, sha256
c4d29cf923e325fc, retrieved 2026-09-24, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).