Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PIC32MM0256GPM028T-I

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · QFN-28-EP(6x6)

PIC32MM0256GPM028T-I from Microchip Tech, in a QFN-28-EP(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PGED1/AN2/C1IND/C2INB/C3INC/RP6/OCM2C/RB0 bidirectional PORTB bit 0 digital I/O shared with ICSP Port 1 data, ADC channel AN2, comparator inputs, remappable RP6 and MCCP2 output C.
2 PGEC1/AN3/C1INC/C2INA/RP7/OCM2D/RB1 bidirectional PORTB bit 1 digital I/O shared with ICSP Port 1 clock, ADC channel AN3, comparator inputs, remappable RP7 and MCCP2 output D.
3 AN4/C1INB/RP8/SDA2/OCM2E/RB2 bidirectional PORTB bit 2 digital I/O shared with ADC channel AN4, comparator 1 input B, remappable RP8, I2C2 data and MCCP2 output E.
4 TDI/AN11/C1INA/RP9/SCL2/OCM2F/RB3 bidirectional PORTB bit 3 digital I/O shared with JTAG data input, ADC channel AN11, comparator 1 input A, remappable RP9, I2C2 clock and MCCP2 output F.
5 VSS power_in Digital modules ground; must always be connected.
6 OSC1/CLKI/AN5/RP3/OCM1C/RA2 bidirectional Primary oscillator crystal pin or external clock input, shared with PORTA bit 2, ADC channel AN5, remappable RP3 and MCCP1 output C.
7 OSC2/CLKO/AN6/C3IND/RP4/OCM1D/RA3 bidirectional Primary oscillator crystal pin or clock output, shared with PORTA bit 3 (high drive strength), ADC channel AN6, comparator 3 input D, remappable RP4 and MCCP1 output D.
8 SOSCI/AN7/RP10/OCM3C/RB4 bidirectional Secondary oscillator crystal pin shared with PORTB bit 4, ADC channel AN7, remappable RP10 and MCCP3 output C.
9 SOSCO/SCLKI/RP5/PWRLCLK/OCM3D/RA4 bidirectional Secondary oscillator crystal pin or digital clock input, shared with PORTA bit 4, remappable RP5, RTCC 50/60 Hz clock input and MCCP3 output D.
10 VDD power_in Digital modules power supply; must always be connected (device operates 2.0V to 3.6V).
11 RB5 bidirectional PORTB bit 5 digital I/O shared with ICSP Port 3 data, remappable RP11, alternate I2C1 data, USB OTG ID, SPI3 slave select/frame signal and MCCP3 output E.
12 VBUS/RB6 power_in USB VBUS connection (5V nominal), shared with PORTB bit 6.
13 RP12/SDA3/SDI3/OCM3F/RB7 bidirectional PORTB bit 7 digital I/O shared with remappable RP12, I2C3 data, SPI3 data input and MCCP3 output F.
14 TCK/RP13/SCL1/U1CTS/SCK1/OCM1A/RB8 bidirectional PORTB bit 8 high drive strength I/O shared with JTAG clock input, remappable RP13, I2C1 clock, UART1 CTS, SPI1 clock and MCCP1 output A.
15 RB9 bidirectional PORTB bit 9 high drive strength I/O shared with JTAG mode select (may toggle during ICSP programming), reference clock input, I2C1 data, timer inputs, UART1 RTS/BCLK, SPI1 data out, MCCP1 output B and INT2.
16 RC9 bidirectional PORTC bit 9 high drive strength I/O shared with ICSP Port 3 clock, JTAG data output, remappable RP18, alternate I2C1 clock, Timer3 inputs, USB output enable, SPI3 data out and MCCP2 output A.
17 VCAP passive Core voltage regulator filter capacitor connection; requires a low-ESR (<5 ohm) 10 µF capacitor to ground and must not be connected to VDD.
18 D-/RB10 bidirectional USB transceiver differential minus line, shared with PORTB bit 10.
19 D+/RB11 bidirectional USB transceiver differential plus line, shared with PORTB bit 11.
20 VUSB3V3 power_in USB transceiver power input, 3.0V to 3.6V (3.3V nominal) and must be powered for USB operation.
21 AN8/LVDIN/RP15/SCL3/SCK3/OCM3A/RB13 bidirectional PORTB bit 13 high drive strength I/O shared with ADC channel AN8, HLVD input, remappable RP15, I2C3 clock, SPI3 clock and MCCP3 output A.
22 CVREF/AN9/C3INB/RP16/RTCC/U1TX/VBUSON/SDI1/OCM3B/INT1/RB14 bidirectional PORTB bit 14 I/O shared with comparator voltage reference output, ADC channel AN9, comparator 3 input B, remappable RP16, RTCC output, UART1 TX, VBUSON, SPI1 data in, MCCP3 output B and INT1.
23 AN10/C3INA/REFCLKO/RP17/U1RX/SS1/FSYNC1/OCM2B/INT0/RB15 bidirectional PORTB bit 15 high drive strength I/O shared with ADC channel AN10, comparator 3 input A, reference clock output, remappable RP17, UART1 RX, SPI1 slave select/frame signal, MCCP2 output B and INT0.
24 AVSS/VSS power_in Analog modules ground; must always be connected even if the ADC is not used.
25 AVDD/VDD power_in Analog modules power supply; must always be connected even if the ADC is not used.
26 MCLR input Master Clear (device Reset) input, active low, also used for device programming and debugging.
27 PGEC2/VREF+/CVREF+/AN0/RP1/OCM1E/INT3/RA0 bidirectional PORTA bit 0 digital I/O shared with ICSP Port 2 clock, ADC and comparator positive voltage reference inputs, ADC channel AN0, remappable RP1, MCCP1 output E and INT3.
28 PGED2/VREF-/AN1/RP2/OCM1F/RA1 bidirectional PORTA bit 1 digital I/O shared with ICSP Port 2 data, ADC negative reference input, ADC channel AN1, remappable RP2 and MCCP1 output F.
29 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package QFN-28-EP(6x6)
Category Single Chip Microcomputer/Microcontroller
Pins 29

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VDD 2 3.6 V 285
Brown-out Reset Voltage on VDD Transition, High-to-Low VBOR 2 2.083 V 285
VDD Start Voltage to Ensure Internal Power-on Reset Signal VPOR 100 mV min VSS 285
Recommended VDD Rise Rate SVDD 0.05 V/ms 0-3.3V in 66 ms, 0-2.0V in 40 ms 285
Operating Junction Temperature Range TJ -40 125 °C 284
Operating Ambient Temperature Range TA -40 125 °C 284
Voltage on VDD with respect to VSS VDD -0.3 4 V 283
Voltage on any 5.5V tolerant pin, VDD = 0V -0.3 4 V When VDD = 0V 283
Voltage on any 5.5V tolerant pin, VDD ≥ 2.0V -0.3 6 V When VDD ≥ 2.0V 283
Voltage on AVSS with respect to VSS -0.3 0.3 V 283
Ambient temperature under bias -40 125 °C 283
Storage temperature -65 150 °C 283
Maximum output current sunk by I/O pin 11 mA 283
Max current sourced by high drive strength I/O pin 24 mA RA3, RA8, RA10, RB8, RB9, RB13, RB15, RC9, RC13 and RD0 283
Thermal Resistance Junction to Ambient, 28-Pin QFN θJA 69.7 °C/W 28-Pin QFN 284
Operating Current IDD 7.9 10.2 mA FSYS = 25 MHz, -40°C to +85°C, 3.3V 285
Operating Current IDD 7.9 12.5 mA FSYS = 25 MHz, -40°C to +125°C, 3.3V 285
Operating Current IDD 2.5 3.7 mA FSYS = 8 MHz, -40°C to +85°C, 3.3V 285
Operating Current IDD 0.96 mA FSYS = 1 MHz, -40°C to +85°C, 3.3V 285
Idle Current IIDLE 2.9 3.7 mA FSYS = 25 MHz, -40°C to +85°C, 3.3V 286
Power-Down Current, Sleep with main regulator active IPD 130 265 µA +25°C, 3.3V, VREGS = 1, RETEN = 0 287
Power-Down Current, Sleep with main regulator in Standby IPD 5 30 µA +25°C, 3.3V, VREGS = 0, RETEN = 0 287
Input Low Voltage, I/O Pins with ST Buffer VIL 0 0.2 V VSS to 0.2 VDD; max printed as 0.2 VDD 289
Input High Voltage, I/O Pins with ST Buffer, with 5V tolerance VIH 0.8 5.5 V min printed as 0.8 VDD 289
CNPUx Pull-up Current ICNPU 150 350 450 µA VDD = 3.3V, VPIN = VSS 289
CNPDx Pull-Down Current ICNPD 230 300 500 µA VDD = 3.3V, VPIN = VDD 289
Input Leakage Current, I/O Pins 5V Tolerant IIL 1 µA VSS ≤ VPIN ≤ VDD, pin at high-impedance 289
Input Leakage Current, MCLR IIL 1 µA VSS ≤ VPIN ≤ VDD 289
Output Low Voltage, I/O Ports VOL 0.4 V IOL = 6.6 mA, VDD = 3.6V 291
Output Low Voltage, I/O Ports VOL 0.21 V IOL = 5.0 mA, VDD = 2V 291
Output High Voltage, I/O Ports VOH 3.25 V IOH = -6.0 mA, VDD = 3.6V 291
Output High Voltage, I/O Ports VOH 1.4 V IOH = -3.0 mA, VDD = 2V 291
Flash Cell Endurance EP 10000 20000 E/W 291
Flash Characteristic Retention TRETD 20 Year If no other specifications are violated 291
Self-Timed Page Erase Time TIE 4.18 4.26 4.33 ms 2048 bytes 291
Self-Timed Chip Erase Time TCE 16.6 16.9 17.3 ms 291
Regulator Output Voltage VRGOUT 1.8 V VDD > 1.9V 292
External Filter Capacitor Value CEFC 4.7 10 µF Series resistance < 3 recommended; < 5 required 292
Low-Voltage Regulator Output Voltage VLVR 0.9 1.2 V RETEN = 1, RETVR (FPOR[2]) = 0 292
Comparator Input Offset Voltage VIOFF -20 20 mV (Note 1) 293
Voltage Reference Absolute Accuracy VRAA -1 1 LSb 293
Voltage Reference Settling Time TSET 10 µs (Note 1) 293

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing ppa 01110 = Time base is synchronized to SCCP8 01101 = Time base is synchronized to the INT4 Pin (Remappable) 150

CAD (KiCad official)

  • Symbol: PIC32MM0256GPM028T-I
  • Footprint: Package_DFN_QFN:QFN-28-1EP_6x6mm_P0.65mm_EP4.8x4.8mm
  • 3D model: QFN-28-EP(6x6) (KiCad packages3D, STEP)
  • 3D model files: pic32mm0256gpm028t-i-etched.step / pic32mm0256gpm028t-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic32mm0256gpm028t-i.step / pic32mm0256gpm028t-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (356 pp, sha256 e0e3b208b87a54d9, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF