3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownPIC32MM0256GPM028T-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · QFN-28-EP(6x6)
PIC32MM0256GPM028T-I from Microchip Tech, in a QFN-28-EP(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PGED1/AN2/C1IND/C2INB/C3INC/RP6/OCM2C/RB0 | bidirectional | PORTB bit 0 digital I/O shared with ICSP Port 1 data, ADC channel AN2, comparator inputs, remappable RP6 and MCCP2 output C. |
| 2 | PGEC1/AN3/C1INC/C2INA/RP7/OCM2D/RB1 | bidirectional | PORTB bit 1 digital I/O shared with ICSP Port 1 clock, ADC channel AN3, comparator inputs, remappable RP7 and MCCP2 output D. |
| 3 | AN4/C1INB/RP8/SDA2/OCM2E/RB2 | bidirectional | PORTB bit 2 digital I/O shared with ADC channel AN4, comparator 1 input B, remappable RP8, I2C2 data and MCCP2 output E. |
| 4 | TDI/AN11/C1INA/RP9/SCL2/OCM2F/RB3 | bidirectional | PORTB bit 3 digital I/O shared with JTAG data input, ADC channel AN11, comparator 1 input A, remappable RP9, I2C2 clock and MCCP2 output F. |
| 5 | VSS | power_in | Digital modules ground; must always be connected. |
| 6 | OSC1/CLKI/AN5/RP3/OCM1C/RA2 | bidirectional | Primary oscillator crystal pin or external clock input, shared with PORTA bit 2, ADC channel AN5, remappable RP3 and MCCP1 output C. |
| 7 | OSC2/CLKO/AN6/C3IND/RP4/OCM1D/RA3 | bidirectional | Primary oscillator crystal pin or clock output, shared with PORTA bit 3 (high drive strength), ADC channel AN6, comparator 3 input D, remappable RP4 and MCCP1 output D. |
| 8 | SOSCI/AN7/RP10/OCM3C/RB4 | bidirectional | Secondary oscillator crystal pin shared with PORTB bit 4, ADC channel AN7, remappable RP10 and MCCP3 output C. |
| 9 | SOSCO/SCLKI/RP5/PWRLCLK/OCM3D/RA4 | bidirectional | Secondary oscillator crystal pin or digital clock input, shared with PORTA bit 4, remappable RP5, RTCC 50/60 Hz clock input and MCCP3 output D. |
| 10 | VDD | power_in | Digital modules power supply; must always be connected (device operates 2.0V to 3.6V). |
| 11 | RB5 | bidirectional | PORTB bit 5 digital I/O shared with ICSP Port 3 data, remappable RP11, alternate I2C1 data, USB OTG ID, SPI3 slave select/frame signal and MCCP3 output E. |
| 12 | VBUS/RB6 | power_in | USB VBUS connection (5V nominal), shared with PORTB bit 6. |
| 13 | RP12/SDA3/SDI3/OCM3F/RB7 | bidirectional | PORTB bit 7 digital I/O shared with remappable RP12, I2C3 data, SPI3 data input and MCCP3 output F. |
| 14 | TCK/RP13/SCL1/U1CTS/SCK1/OCM1A/RB8 | bidirectional | PORTB bit 8 high drive strength I/O shared with JTAG clock input, remappable RP13, I2C1 clock, UART1 CTS, SPI1 clock and MCCP1 output A. |
| 15 | RB9 | bidirectional | PORTB bit 9 high drive strength I/O shared with JTAG mode select (may toggle during ICSP programming), reference clock input, I2C1 data, timer inputs, UART1 RTS/BCLK, SPI1 data out, MCCP1 output B and INT2. |
| 16 | RC9 | bidirectional | PORTC bit 9 high drive strength I/O shared with ICSP Port 3 clock, JTAG data output, remappable RP18, alternate I2C1 clock, Timer3 inputs, USB output enable, SPI3 data out and MCCP2 output A. |
| 17 | VCAP | passive | Core voltage regulator filter capacitor connection; requires a low-ESR (<5 ohm) 10 µF capacitor to ground and must not be connected to VDD. |
| 18 | D-/RB10 | bidirectional | USB transceiver differential minus line, shared with PORTB bit 10. |
| 19 | D+/RB11 | bidirectional | USB transceiver differential plus line, shared with PORTB bit 11. |
| 20 | VUSB3V3 | power_in | USB transceiver power input, 3.0V to 3.6V (3.3V nominal) and must be powered for USB operation. |
| 21 | AN8/LVDIN/RP15/SCL3/SCK3/OCM3A/RB13 | bidirectional | PORTB bit 13 high drive strength I/O shared with ADC channel AN8, HLVD input, remappable RP15, I2C3 clock, SPI3 clock and MCCP3 output A. |
| 22 | CVREF/AN9/C3INB/RP16/RTCC/U1TX/VBUSON/SDI1/OCM3B/INT1/RB14 | bidirectional | PORTB bit 14 I/O shared with comparator voltage reference output, ADC channel AN9, comparator 3 input B, remappable RP16, RTCC output, UART1 TX, VBUSON, SPI1 data in, MCCP3 output B and INT1. |
| 23 | AN10/C3INA/REFCLKO/RP17/U1RX/SS1/FSYNC1/OCM2B/INT0/RB15 | bidirectional | PORTB bit 15 high drive strength I/O shared with ADC channel AN10, comparator 3 input A, reference clock output, remappable RP17, UART1 RX, SPI1 slave select/frame signal, MCCP2 output B and INT0. |
| 24 | AVSS/VSS | power_in | Analog modules ground; must always be connected even if the ADC is not used. |
| 25 | AVDD/VDD | power_in | Analog modules power supply; must always be connected even if the ADC is not used. |
| 26 | MCLR | input | Master Clear (device Reset) input, active low, also used for device programming and debugging. |
| 27 | PGEC2/VREF+/CVREF+/AN0/RP1/OCM1E/INT3/RA0 | bidirectional | PORTA bit 0 digital I/O shared with ICSP Port 2 clock, ADC and comparator positive voltage reference inputs, ADC channel AN0, remappable RP1, MCCP1 output E and INT3. |
| 28 | PGED2/VREF-/AN1/RP2/OCM1F/RA1 | bidirectional | PORTA bit 1 digital I/O shared with ICSP Port 2 data, ADC negative reference input, ADC channel AN1, remappable RP2 and MCCP1 output F. |
| 29 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | QFN-28-EP(6x6) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 29 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDD | 2 | 3.6 | V | 285 | ||
| Brown-out Reset Voltage on VDD Transition, High-to-Low | VBOR | 2 | 2.083 | V | 285 | ||
| VDD Start Voltage to Ensure Internal Power-on Reset Signal | VPOR | 100 | mV | min VSS | 285 | ||
| Recommended VDD Rise Rate | SVDD | 0.05 | V/ms | 0-3.3V in 66 ms, 0-2.0V in 40 ms | 285 | ||
| Operating Junction Temperature Range | TJ | -40 | 125 | °C | 284 | ||
| Operating Ambient Temperature Range | TA | -40 | 125 | °C | 284 | ||
| Voltage on VDD with respect to VSS | VDD | -0.3 | 4 | V | 283 | ||
| Voltage on any 5.5V tolerant pin, VDD = 0V | -0.3 | 4 | V | When VDD = 0V | 283 | ||
| Voltage on any 5.5V tolerant pin, VDD ≥ 2.0V | -0.3 | 6 | V | When VDD ≥ 2.0V | 283 | ||
| Voltage on AVSS with respect to VSS | -0.3 | 0.3 | V | 283 | |||
| Ambient temperature under bias | -40 | 125 | °C | 283 | |||
| Storage temperature | -65 | 150 | °C | 283 | |||
| Maximum output current sunk by I/O pin | 11 | mA | 283 | ||||
| Max current sourced by high drive strength I/O pin | 24 | mA | RA3, RA8, RA10, RB8, RB9, RB13, RB15, RC9, RC13 and RD0 | 283 | |||
| Thermal Resistance Junction to Ambient, 28-Pin QFN | θJA | 69.7 | °C/W | 28-Pin QFN | 284 | ||
| Operating Current | IDD | 7.9 | 10.2 | mA | FSYS = 25 MHz, -40°C to +85°C, 3.3V | 285 | |
| Operating Current | IDD | 7.9 | 12.5 | mA | FSYS = 25 MHz, -40°C to +125°C, 3.3V | 285 | |
| Operating Current | IDD | 2.5 | 3.7 | mA | FSYS = 8 MHz, -40°C to +85°C, 3.3V | 285 | |
| Operating Current | IDD | 0.96 | mA | FSYS = 1 MHz, -40°C to +85°C, 3.3V | 285 | ||
| Idle Current | IIDLE | 2.9 | 3.7 | mA | FSYS = 25 MHz, -40°C to +85°C, 3.3V | 286 | |
| Power-Down Current, Sleep with main regulator active | IPD | 130 | 265 | µA | +25°C, 3.3V, VREGS = 1, RETEN = 0 | 287 | |
| Power-Down Current, Sleep with main regulator in Standby | IPD | 5 | 30 | µA | +25°C, 3.3V, VREGS = 0, RETEN = 0 | 287 | |
| Input Low Voltage, I/O Pins with ST Buffer | VIL | 0 | 0.2 | V | VSS to 0.2 VDD; max printed as 0.2 VDD | 289 | |
| Input High Voltage, I/O Pins with ST Buffer, with 5V tolerance | VIH | 0.8 | 5.5 | V | min printed as 0.8 VDD | 289 | |
| CNPUx Pull-up Current | ICNPU | 150 | 350 | 450 | µA | VDD = 3.3V, VPIN = VSS | 289 |
| CNPDx Pull-Down Current | ICNPD | 230 | 300 | 500 | µA | VDD = 3.3V, VPIN = VDD | 289 |
| Input Leakage Current, I/O Pins 5V Tolerant | IIL | 1 | µA | VSS ≤ VPIN ≤ VDD, pin at high-impedance | 289 | ||
| Input Leakage Current, MCLR | IIL | 1 | µA | VSS ≤ VPIN ≤ VDD | 289 | ||
| Output Low Voltage, I/O Ports | VOL | 0.4 | V | IOL = 6.6 mA, VDD = 3.6V | 291 | ||
| Output Low Voltage, I/O Ports | VOL | 0.21 | V | IOL = 5.0 mA, VDD = 2V | 291 | ||
| Output High Voltage, I/O Ports | VOH | 3.25 | V | IOH = -6.0 mA, VDD = 3.6V | 291 | ||
| Output High Voltage, I/O Ports | VOH | 1.4 | V | IOH = -3.0 mA, VDD = 2V | 291 | ||
| Flash Cell Endurance | EP | 10000 | 20000 | E/W | 291 | ||
| Flash Characteristic Retention | TRETD | 20 | Year | If no other specifications are violated | 291 | ||
| Self-Timed Page Erase Time | TIE | 4.18 | 4.26 | 4.33 | ms | 2048 bytes | 291 |
| Self-Timed Chip Erase Time | TCE | 16.6 | 16.9 | 17.3 | ms | 291 | |
| Regulator Output Voltage | VRGOUT | 1.8 | V | VDD > 1.9V | 292 | ||
| External Filter Capacitor Value | CEFC | 4.7 | 10 | µF | Series resistance < 3 recommended; < 5 required | 292 | |
| Low-Voltage Regulator Output Voltage | VLVR | 0.9 | 1.2 | V | RETEN = 1, RETVR (FPOR[2]) = 0 | 292 | |
| Comparator Input Offset Voltage | VIOFF | -20 | 20 | mV | (Note 1) | 293 | |
| Voltage Reference Absolute Accuracy | VRAA | -1 | 1 | LSb | 293 | ||
| Voltage Reference Settling Time | TSET | 10 | µs | (Note 1) | 293 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | ppa | 01110 = Time base is synchronized to SCCP8 01101 = Time base is synchronized to the INT4 Pin (Remappable) | 150 |
CAD (KiCad official)
- Symbol:
PIC32MM0256GPM028T-I - Footprint:
Package_DFN_QFN:QFN-28-1EP_6x6mm_P0.65mm_EP4.8x4.8mm - 3D model: QFN-28-EP(6x6) (KiCad packages3D, STEP)
- 3D model files:
pic32mm0256gpm028t-i-etched.step/pic32mm0256gpm028t-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic32mm0256gpm028t-i.step/pic32mm0256gpm028t-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (356 pp, sha256
e0e3b208b87a54d9, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).