Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TPS54233DR

Texas Instruments · DC-DC Converters · SOIC-8

TPS54233DR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 BOOT passive Bootstrap supply node; connect 0.1 μF ceramic capacitor between BOOT and PH; integrated boot regulator sources this node; MOSFET disabled if BOOT-PH voltage falls below 2.1 V typical; rated 0-38 V absolute maximum.
2 VIN power_in Input power supply; accepts regulated DC voltage from 3.5 V to 28 V; rated -0.3 V to 30 V absolute maximum; internal supply bias and high-side MOSFET gate driver powered from this pin.
3 EN input Enable control input; float to enable converter or pull below 1.25 V threshold to disable; internal pull-up current source (1-3 μA) available for external UVLO threshold divider programming; rated -0.3 V to 6 V absolute maximum.
4 SS passive Slow start network node; external capacitor (1-27 nF recommended) connects to ground and charges from 2 μA current source to set output voltage rise time from 1 ms to 10 ms; rated -0.3 V to 3 V absolute maximum; 200 μA sink current specified.
5 VSENSE input Inverting input to transconductance error amplifier (92 μA/V gain, 800 V/V DC gain); connect output voltage divider tap for feedback regulation and closed-loop control; rated -0.3 V to 3 V absolute maximum; 10 μA sink current specified.
6 COMP output Error amplifier output and PWM comparator input; attach frequency compensation network (series R and C to ground) to set loop crossover frequency and phase margin; rated -0.3 V to 3 V absolute maximum; source/sink current ±7 μA at 1 V nominal; maximum clamp limits peak inductor current.
7 GND power_in Ground reference; provides return path for all power supplies and signal circuits; fused lead frame improves thermal dissipation; connect to ground plane via multiple vias for heat removal.
8 PH output Switching node output of integrated high-side MOSFET (80 mΩ typical on-resistance); voltage swings from 0 V to BOOT-PH voltage level during switching; connect to output inductor and catch diode cathode to complete buck converter power stage; rated -0.6 V to 30 V absolute maximum; source current 6 A specified.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Power Management (PMIC)
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage (VIN pin) VIN -0.3 30 V 4
EN pin input voltage EN -0.3 6 V 4
BOOT pin voltage BOOT 38 V 4
VSENSE pin voltage VSENSE -0.3 3 V 4
COMP pin voltage COMP -0.3 3 V 4
SS pin voltage SS -0.3 3 V 4
BOOT-PH voltage BOOT-PH 8 V 4
PH output voltage PH -0.6 30 V 4
PH transient voltage PH -5 V 10 ns transient from ground to negative peak 4
EN source current 100 μA 4
BOOT source current 100 mA 4
VSENSE source current 10 μA 4
PH source current 6 A 4
VIN source current 6 A 4
COMP sink current 100 μA 4
SS sink current 200 μA 4
Operating junction temperature (absolute maximum) TJ -40 150 °C 4
Storage temperature -65 150 °C 4
Operating input voltage (VIN pin) VIN 3.5 28 V 4
Operating junction temperature TJ -40 150 °C 4
Voltage reference 0.772 0.8 0.828 V 5
High-side MOSFET on resistance RDS(on) 115 200 mΩ BOOT-PH = 3 V, VIN = 3.5 V 5
High-side MOSFET on resistance RDS(on) 80 150 mΩ BOOT-PH = 6 V, VIN = 12 V 5
Error amplifier source/sink current -7 7 μA V(COMP) = 1 V, 100 mV overdrive 5
Current limit threshold 2.3 3.5 A VIN = 12 V 5
Minimum controllable on time 105 130 ns VIN = 12 V, 25°C 5
Device switching frequency fsw 210 300 390 kHz VIN = 12 V 5
Maximum controllable duty ratio 90 93 % BOOT-PH = 6 V 5
Shutdown supply current 1 4 μA EN = 0 V, VIN = 12 V, –40°C to 85°C 5
Operating non-switching supply current 75 110 μA VSENSE = 0.85 V 5
Enable threshold 1.25 1.35 V Rising and Falling 5
Internal undervoltage lockout threshold 3.5 V Rising and Falling 5
Input current at enable threshold − 50 mV -1 μA Enable threshold − 50 mV 5
Input current at enable threshold + 50 mV -4 μA Enable threshold + 50 mV 5
Error amplifier transconductance (gm) gm 92 μmhos –2 μA < I(COMP) < 2 μA, V(COMP) = 1 V 5
Error amplifier DC gain 800 V/V VSENSE = 0.8 V 5
Error amplifier unity gain bandwidth 2.7 MHz 5 pF capacitance from COMP to GND pins 5
Switch current to COMP transconductance 9 A/V VIN = 12 V 5
Pulse skipping Eco-mode switch current threshold 100 mA 5
Thermal shutdown 165 °C 5
Slow start charge current 2 μA V(SS) = 0.4 V 5
SS to VSENSE matching 10 mV V(SS) = 0.4 V 5
Junction-to-ambient thermal resistance RθJA 116.7 °C/W D package, 8 pins 4
Junction-to-case (top) thermal resistance RθJC(top) 62.4 °C/W D package, 8 pins 4
Junction-to-board thermal resistance RθJB 57 °C/W D package, 8 pins 4
Junction-to-top characterization parameter ψJT 14.5 °C/W D package, 8 pins 4
Junction-to-board characterization parameter ψJB 56.5 °C/W D package, 8 pins 4

CAD (KiCad official)

  • Symbol: TPS54233DR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: tps54233dr-etched.step / tps54233dr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps54233dr.step / tps54233dr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (33 pp, sha256 82b6671a411fda8e, retrieved 2026-09-23, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF