Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

UC2844ADTR

Texas Instruments · DC-DC Controllers · SOIC-14

UC2844ADTR from Texas Instruments, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 COMP output Low-impedance internal error amplifier output (1 MHz, AVOL 80 dB) that also feeds the peak current limit/PWM comparator; it sinks up to 6 mA and is not internally current-limited.
2 NC unconnected No connection; the datasheet lists this pin as no-connect (无连接).
3 FB input Error amplifier input used to close the power converter voltage feedback loop and set loop stability.
4 NC unconnected No connection; the datasheet lists this pin as no-connect (无连接).
5 ISENSE input Input to the peak current limit/PWM comparator; with a sense resistor the error amplifier output sets cycle-by-cycle peak current limit, and the peak sense signal is internally clamped at 1 V.
6 NC unconnected No connection; the datasheet lists this pin as no-connect (无连接).
7 RT/CT input Internal oscillator timing input programmed by external RT and CT; TI recommends CT of 470 pF to 4.7 nF and RT of 5 kΩ to 100 kΩ.
8 PGND power_in Power ground and gate-driver return path; a star-ground connection diverts gate-driver return current away from the signal GND pin to reduce PWM instability.
9 GND power_in Controller signal ground.
10 OUTPUT output 1 A totem-pole gate driver output that sources and sinks up to 1 A; a gate driver resistor must be used to limit gate current.
11 VC input Gate driver bias input; its bias capacitor must be at least 10 times the gate capacitance of the main switch FET.
12 VCC power_in Bias supply input for the gate driver; its bias capacitor must be at least 10 times the gate capacitance of the main switch FET.
13 NC unconnected No connection; the datasheet lists this pin as no-connect (无连接).
14 VREF power_in PWM controller reference output that must supply no more than 10 mA in normal operation, is short-circuit protected at about 100 mA, and needs a 1 µF high-frequency bypass capacitor with the VCC capacitor at least 10 times larger.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-14
Category Power Supply Chip
Pins 14

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage (TJ = 25°C, IO = 1mA) 4.95 5 5.05 V TJ = 25°C, IO = 1mA 6
Line regulation 6 20 mV 12 ≤ VIN ≤ 25V 6
Load regulation 6 25 mV 1 ≤ IO ≤ 20mA 6
Temperature stability 0.2 0.4 mV/°C See notes (1) (6) 6
Total output variation (line, load, temperature) 4.9 5.1 V Line, load, temperature 6
Long-term stability 5 25 mV TA = 125°C, 1000 h 6
Output short-circuit current -30 -100 -180 mA 6
Oscillator initial accuracy 47 52 57 kHz TJ = 25°C 6
Oscillator voltage stability 0.2 1 % 12 ≤ VCC ≤ 25V 6
Oscillator temperature stability 5 % TMIN ≤ TA ≤ TMAX 6
Discharge current (TJ = 25°C) 7.8 8.3 8.8 mA TJ = 25°C, VRT/CT = 2V 6
Discharge current (full temperature range) 7.5 8.8 mA VRT/CT = 2V 6
Error amplifier input voltage 2.45 2.5 2.55 V VCOMP = 2.5V 7
Error amplifier input bias current -0.3 -1 µA 7
Error amplifier open-loop gain AVOL 65 90 dB 2 ≤ VO ≤ 4V 7
Error amplifier unity-gain bandwidth 0.7 1 MHz TJ = 25°C 7
Error amplifier CMRR CMRR 60 70 dB 12 ≤ VCC ≤ 25V 7
Error amplifier output sink current 2 6 mA VFB = 2.7V, VCOMP = 1.1V 7
Error amplifier output source current -0.5 -0.8 mA VFB = 2.3V, VCOMP = 5V 7
VOUT high level VOUT 5 6 V VFB = 2.3V, RL = 15kΩ to ground 7
VOUT low level VOUT 0.7 1.1 V VFB = 2.7V, RL = 15kΩ to VREF 7
Current-sense gain 2.85 3 3.15 V/V See notes (2) (3) 7
Current-sense maximum input signal 0.9 1 1.1 V VCOMP = 5V 7
Current-sense input bias current -2 -10 µA 7
Delay to output 150 300 ns VISENSE = 0V to 2V 7
Output low level (20 mA sink) 0.1 0.4 V ISINK = 20mA 7
Output low level (200 mA sink) 2.2 V ISINK = 200mA 7
Output high level (20 mA source) 13 13.5 V ISOURCE = 20mA 7
Output high level (200 mA source) 12 13.5 V ISOURCE = 200mA 7
Output rise time 50 150 ns TJ = 25°C, CL = 1nF 7
Output fall time 50 150 ns TJ = 25°C, CL = 1nF 7
UVLO saturation 0.7 1.2 V VCC = 5V, ISINK = 10mA 7
UVLO start threshold (UC2844A row) 15 16 17 V 7
Minimum operating voltage after turn-on (UC2844A row) 9 10 11 V 7
Maximum duty cycle (UCx844A) 47 48 50 % UCx844A 7
Start-up current 0.3 0.5 mA 7
Operating supply current 11 17 mA VFB = VISENSE = 0V 7
VCC zener voltage 30 34 V ICC = 25mA 7
VCC supply voltage (low-impedance source) VCC 30 V Low-impedance source 5
Output current IOUT -1 1 A 5
Output energy (capacitive load) 5 µJ Capacitive load 5
Analog inputs voltage -0.3 6.3 V 5
Maximum negative voltage, all pins -0.3 V 5
Differential voltage between VC and VCC -0.3 V VC pin 5
Error amplifier output sink current ICOMP 10 mA 5
Power dissipation 1 W TA ≤ 25°C 5
Lead temperature (soldering) 300 °C 10 s 5
Junction temperature TJ -55 150 °C 5
Storage temperature Tstg -65 150 °C 5
VCC bias supply voltage VCC 11 V VCC pin 5
Analog pins voltage (FB, ISENSE, RT/CT) VFB, VRC, VVFB -0.1 5 V 5
Gate driver output voltage VOUT -0.1 V 5
Supply bias current IVCC 25 mA 5
VREF output current IVREF 10 mA VREF pin 5
Oscillator frequency fOSC 500 kHz 5
Operating ambient temperature (UC284xA) TA -40 85 °C Natural convection 5
Junction-to-ambient thermal resistance (RθJA) RθJA 77.9 °C/W D (SOIC) 14-pin 6
Junction-to-case (top) thermal resistance (RθJC(top)) RθJC(top) 35.8 °C/W D (SOIC) 14-pin 6
Junction-to-board thermal resistance (RθJB) RθJB 32.5 °C/W D (SOIC) 14-pin 6

CAD (KiCad official)

  • Symbol: UC2844ADTR
  • Footprint: Package_SO:SOIC-14_3.9x8.7mm_P1.27mm
  • 3D model: SOIC-14 (KiCad packages3D, STEP)
  • 3D model files: uc2844adtr-etched.step / uc2844adtr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); uc2844adtr.step / uc2844adtr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (50 pp, sha256 0eebf00e4b265207, retrieved 2026-10-29, tier: manufacturer)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF