Generated by kicad-footprint-generator · KiCad file format 20260206
UC2844ADTR
Texas Instruments · DC-DC Controllers · SOIC-14
UC2844ADTR from Texas Instruments, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | COMP | output | Low-impedance internal error amplifier output (1 MHz, AVOL 80 dB) that also feeds the peak current limit/PWM comparator; it sinks up to 6 mA and is not internally current-limited. |
| 2 | NC | unconnected | No connection; the datasheet lists this pin as no-connect (无连接). |
| 3 | FB | input | Error amplifier input used to close the power converter voltage feedback loop and set loop stability. |
| 4 | NC | unconnected | No connection; the datasheet lists this pin as no-connect (无连接). |
| 5 | ISENSE | input | Input to the peak current limit/PWM comparator; with a sense resistor the error amplifier output sets cycle-by-cycle peak current limit, and the peak sense signal is internally clamped at 1 V. |
| 6 | NC | unconnected | No connection; the datasheet lists this pin as no-connect (无连接). |
| 7 | RT/CT | input | Internal oscillator timing input programmed by external RT and CT; TI recommends CT of 470 pF to 4.7 nF and RT of 5 kΩ to 100 kΩ. |
| 8 | PGND | power_in | Power ground and gate-driver return path; a star-ground connection diverts gate-driver return current away from the signal GND pin to reduce PWM instability. |
| 9 | GND | power_in | Controller signal ground. |
| 10 | OUTPUT | output | 1 A totem-pole gate driver output that sources and sinks up to 1 A; a gate driver resistor must be used to limit gate current. |
| 11 | VC | input | Gate driver bias input; its bias capacitor must be at least 10 times the gate capacitance of the main switch FET. |
| 12 | VCC | power_in | Bias supply input for the gate driver; its bias capacitor must be at least 10 times the gate capacitance of the main switch FET. |
| 13 | NC | unconnected | No connection; the datasheet lists this pin as no-connect (无连接). |
| 14 | VREF | power_in | PWM controller reference output that must supply no more than 10 mA in normal operation, is short-circuit protected at about 100 mA, and needs a 1 µF high-frequency bypass capacitor with the VCC capacitor at least 10 times larger. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-14 |
| Category | Power Supply Chip |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage (TJ = 25°C, IO = 1mA) | 4.95 | 5 | 5.05 | V | TJ = 25°C, IO = 1mA | 6 | |
| Line regulation | 6 | 20 | mV | 12 ≤ VIN ≤ 25V | 6 | ||
| Load regulation | 6 | 25 | mV | 1 ≤ IO ≤ 20mA | 6 | ||
| Temperature stability | 0.2 | 0.4 | mV/°C | See notes (1) (6) | 6 | ||
| Total output variation (line, load, temperature) | 4.9 | 5.1 | V | Line, load, temperature | 6 | ||
| Long-term stability | 5 | 25 | mV | TA = 125°C, 1000 h | 6 | ||
| Output short-circuit current | -30 | -100 | -180 | mA | 6 | ||
| Oscillator initial accuracy | 47 | 52 | 57 | kHz | TJ = 25°C | 6 | |
| Oscillator voltage stability | 0.2 | 1 | % | 12 ≤ VCC ≤ 25V | 6 | ||
| Oscillator temperature stability | 5 | % | TMIN ≤ TA ≤ TMAX | 6 | |||
| Discharge current (TJ = 25°C) | 7.8 | 8.3 | 8.8 | mA | TJ = 25°C, VRT/CT = 2V | 6 | |
| Discharge current (full temperature range) | 7.5 | 8.8 | mA | VRT/CT = 2V | 6 | ||
| Error amplifier input voltage | 2.45 | 2.5 | 2.55 | V | VCOMP = 2.5V | 7 | |
| Error amplifier input bias current | -0.3 | -1 | µA | 7 | |||
| Error amplifier open-loop gain | AVOL | 65 | 90 | dB | 2 ≤ VO ≤ 4V | 7 | |
| Error amplifier unity-gain bandwidth | 0.7 | 1 | MHz | TJ = 25°C | 7 | ||
| Error amplifier CMRR | CMRR | 60 | 70 | dB | 12 ≤ VCC ≤ 25V | 7 | |
| Error amplifier output sink current | 2 | 6 | mA | VFB = 2.7V, VCOMP = 1.1V | 7 | ||
| Error amplifier output source current | -0.5 | -0.8 | mA | VFB = 2.3V, VCOMP = 5V | 7 | ||
| VOUT high level | VOUT | 5 | 6 | V | VFB = 2.3V, RL = 15kΩ to ground | 7 | |
| VOUT low level | VOUT | 0.7 | 1.1 | V | VFB = 2.7V, RL = 15kΩ to VREF | 7 | |
| Current-sense gain | 2.85 | 3 | 3.15 | V/V | See notes (2) (3) | 7 | |
| Current-sense maximum input signal | 0.9 | 1 | 1.1 | V | VCOMP = 5V | 7 | |
| Current-sense input bias current | -2 | -10 | µA | 7 | |||
| Delay to output | 150 | 300 | ns | VISENSE = 0V to 2V | 7 | ||
| Output low level (20 mA sink) | 0.1 | 0.4 | V | ISINK = 20mA | 7 | ||
| Output low level (200 mA sink) | 2.2 | V | ISINK = 200mA | 7 | |||
| Output high level (20 mA source) | 13 | 13.5 | V | ISOURCE = 20mA | 7 | ||
| Output high level (200 mA source) | 12 | 13.5 | V | ISOURCE = 200mA | 7 | ||
| Output rise time | 50 | 150 | ns | TJ = 25°C, CL = 1nF | 7 | ||
| Output fall time | 50 | 150 | ns | TJ = 25°C, CL = 1nF | 7 | ||
| UVLO saturation | 0.7 | 1.2 | V | VCC = 5V, ISINK = 10mA | 7 | ||
| UVLO start threshold (UC2844A row) | 15 | 16 | 17 | V | 7 | ||
| Minimum operating voltage after turn-on (UC2844A row) | 9 | 10 | 11 | V | 7 | ||
| Maximum duty cycle (UCx844A) | 47 | 48 | 50 | % | UCx844A | 7 | |
| Start-up current | 0.3 | 0.5 | mA | 7 | |||
| Operating supply current | 11 | 17 | mA | VFB = VISENSE = 0V | 7 | ||
| VCC zener voltage | 30 | 34 | V | ICC = 25mA | 7 | ||
| VCC supply voltage (low-impedance source) | VCC | 30 | V | Low-impedance source | 5 | ||
| Output current | IOUT | -1 | 1 | A | 5 | ||
| Output energy (capacitive load) | 5 | µJ | Capacitive load | 5 | |||
| Analog inputs voltage | -0.3 | 6.3 | V | 5 | |||
| Maximum negative voltage, all pins | -0.3 | V | 5 | ||||
| Differential voltage between VC and VCC | -0.3 | V | VC pin | 5 | |||
| Error amplifier output sink current | ICOMP | 10 | mA | 5 | |||
| Power dissipation | 1 | W | TA ≤ 25°C | 5 | |||
| Lead temperature (soldering) | 300 | °C | 10 s | 5 | |||
| Junction temperature | TJ | -55 | 150 | °C | 5 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 5 | ||
| VCC bias supply voltage | VCC | 11 | V | VCC pin | 5 | ||
| Analog pins voltage (FB, ISENSE, RT/CT) | VFB, VRC, VVFB | -0.1 | 5 | V | 5 | ||
| Gate driver output voltage | VOUT | -0.1 | V | 5 | |||
| Supply bias current | IVCC | 25 | mA | 5 | |||
| VREF output current | IVREF | 10 | mA | VREF pin | 5 | ||
| Oscillator frequency | fOSC | 500 | kHz | 5 | |||
| Operating ambient temperature (UC284xA) | TA | -40 | 85 | °C | Natural convection | 5 | |
| Junction-to-ambient thermal resistance (RθJA) | RθJA | 77.9 | °C/W | D (SOIC) 14-pin | 6 | ||
| Junction-to-case (top) thermal resistance (RθJC(top)) | RθJC(top) | 35.8 | °C/W | D (SOIC) 14-pin | 6 | ||
| Junction-to-board thermal resistance (RθJB) | RθJB | 32.5 | °C/W | D (SOIC) 14-pin | 6 |
CAD (KiCad official)
- Symbol:
UC2844ADTR - Footprint:
Package_SO:SOIC-14_3.9x8.7mm_P1.27mm - 3D model: SOIC-14 (KiCad packages3D, STEP)
- 3D model files:
uc2844adtr-etched.step/uc2844adtr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);uc2844adtr.step/uc2844adtr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (50 pp, sha256
0eebf00e4b265207, retrieved 2026-10-29, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).