component
0451008.MRL
Public Made by Adomby adom
Littelfuse Disposable Fuses, 2410. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdown0451008.MRL
Littelfuse · Disposable Fuses · 2410
0451008.MRL from Littelfuse, in a 2410. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table and the footprint is an Adom_Gen land derived from the manufacturer drawing; the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Fuse terminal (end cap), non-polarized and interchangeable with the other terminal; the datasheet does not print a pin number, and this element is rated 1 A (amp code 001.) at 125 V max with 0.0780 ohm nominal cold resistance. |
| 2 | 2 | passive | Fuse terminal (end cap), non-polarized and interchangeable with the other terminal; the datasheet does not print a pin number, and this element is rated 1 A (amp code 001.) at 125 V max with 0.0780 ohm nominal cold resistance. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Littelfuse |
| Package | 2410 |
| Category | Circuit Protection |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Opening time at 200% of ampere rating | 5 | sec | 200% of ampere rating, 0.062-10 A ratings | 2 | |||
| Opening time at 100% of ampere rating | 4 | hours | 100% of ampere rating, 0.062-20 A ratings | 2 | |||
| Max voltage rating | 125 | V | Max voltage rating for 8.00 A, Amp Code 008. | 2 | |||
| Nominal cold resistance | 0.0077 | Ohms | Resistance measured at 10% of rated current, 25ºC | 2 | |||
| Nominal melting I2t | I2t | 20.23 | A2 sec | I2t calculated at 8ms | 2 | ||
| Operating temperature | -55 | 125 | °C | 4 | |||
| Insulation resistance after opening | 10000 | ohms | MIL-STD-202, Method 302, Test Condition A, after opening | 4 | |||
| Preheat temperature Ts(min) | Ts(min) | 150 | °C | Reflow pre-heat, Pb-free assembly | 3 | ||
| Preheat temperature Ts(max) | Ts(max) | 200 | °C | Reflow pre-heat, Pb-free assembly | 3 | ||
| Preheat time (Ts min to max) | ts | 60 | 180 | secs | Reflow pre-heat, Pb-free assembly | 3 | |
| Ramp-up rate TS(max) to TL | 5 | °C/second | Maximum ramp-up rate, Pb-free reflow | 3 | |||
| Liquidus temperature TL | TL | 217 | °C | Reflow liquidus temperature, Pb-free | 3 | ||
| Time above liquidus tL | tL | 60 | 150 | seconds | Reflow, Pb-free | 3 | |
| Peak temperature TP | TP | 260 | °C | Reflow peak temperature, printed 260+0/-5 °C | 3 | ||
| Time within 5°C of actual peak temperature | tp | 20 | 40 | seconds | Reflow, Pb-free | 3 | |
| Ramp-down rate | 5 | °C/second | Maximum ramp-down rate, Pb-free reflow | 3 | |||
| Time 25°C to peak temperature | 8 | minutes | Maximum time from 25°C to peak, Pb-free reflow | 3 | |||
| Wave soldering time at peak temperature | 10 | seconds | Wave soldering, 260°C peak temperature | 3 |
CAD (Adom-generated)
- Symbol:
0451008.MRL - Footprint:
Adom_Gen:Littelfuse_0451008_cb5d09 - 3D model: generated to fit the land (STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Littelfuse datasheet (4 pp, sha256
399d3cc9da991aa3, retrieved 2026-11-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing. 3D model generated to fit that land.