main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20251024
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers 0451008-mrl: viewers rendered from the public page · Ray
0451008-mrl-hero.glb Publish 0.1.1 · Ray
0451008-mrl-hero.overlay.json Publish 0.1.1 · Ray
0451008-mrl.glb Publish 0.1.0 · Ray
0451008-mrl.kicad_mod 0451008-mrl: no pin-1 polarity bar on an unpolarised two-terminal land · Ray
0451008-mrl.kicad_sym Publish 0.1.0 · Ray
0451008-mrl.lbr 0451008-mrl: no pin-1 polarity bar on an unpolarised two-terminal land · Ray
0451008-mrl.step Publish 0.1.0 · Ray
package.json Publish 0.1.2 · Ray
page.json Publish 0.1.2 · Ray
README.md 0451008-mrl: CAD wording names the Adom_Gen land, not KiCad official · Ray
verification.json Verified: Published by the parts factory: tier mfr, 2 pins · Ray

0451008.MRL

Littelfuse · Disposable Fuses · 2410

0451008.MRL from Littelfuse, in a 2410. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table and the footprint is an Adom_Gen land derived from the manufacturer drawing; the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 1 passive Fuse terminal (end cap), non-polarized and interchangeable with the other terminal; the datasheet does not print a pin number, and this element is rated 1 A (amp code 001.) at 125 V max with 0.0780 ohm nominal cold resistance.
2 2 passive Fuse terminal (end cap), non-polarized and interchangeable with the other terminal; the datasheet does not print a pin number, and this element is rated 1 A (amp code 001.) at 125 V max with 0.0780 ohm nominal cold resistance.

Key specifications

Parameter Value
Manufacturer Littelfuse
Package 2410
Category Circuit Protection
Pins 2

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Opening time at 200% of ampere rating 5 sec 200% of ampere rating, 0.062-10 A ratings 2
Opening time at 100% of ampere rating 4 hours 100% of ampere rating, 0.062-20 A ratings 2
Max voltage rating 125 V Max voltage rating for 8.00 A, Amp Code 008. 2
Nominal cold resistance 0.0077 Ohms Resistance measured at 10% of rated current, 25ºC 2
Nominal melting I2t I2t 20.23 A2 sec I2t calculated at 8ms 2
Operating temperature -55 125 °C 4
Insulation resistance after opening 10000 ohms MIL-STD-202, Method 302, Test Condition A, after opening 4
Preheat temperature Ts(min) Ts(min) 150 °C Reflow pre-heat, Pb-free assembly 3
Preheat temperature Ts(max) Ts(max) 200 °C Reflow pre-heat, Pb-free assembly 3
Preheat time (Ts min to max) ts 60 180 secs Reflow pre-heat, Pb-free assembly 3
Ramp-up rate TS(max) to TL 5 °C/second Maximum ramp-up rate, Pb-free reflow 3
Liquidus temperature TL TL 217 °C Reflow liquidus temperature, Pb-free 3
Time above liquidus tL tL 60 150 seconds Reflow, Pb-free 3
Peak temperature TP TP 260 °C Reflow peak temperature, printed 260+0/-5 °C 3
Time within 5°C of actual peak temperature tp 20 40 seconds Reflow, Pb-free 3
Ramp-down rate 5 °C/second Maximum ramp-down rate, Pb-free reflow 3
Time 25°C to peak temperature 8 minutes Maximum time from 25°C to peak, Pb-free reflow 3
Wave soldering time at peak temperature 10 seconds Wave soldering, 260°C peak temperature 3

CAD (Adom-generated)

  • Symbol: 0451008.MRL
  • Footprint: Adom_Gen:Littelfuse_0451008_cb5d09
  • 3D model: generated to fit the land (STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Littelfuse datasheet (4 pp, sha256 399d3cc9da991aa3, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing. 3D model generated to fit that land.

Datasheet PDF