3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗PCB Footprint
Open full view ↗Datasheet
Open in new tab ↗Contents
README
markdownM24C02-DRDW8TP
The maker sells this part only as M24C02-DRDW8TP/K (ST ordering information scheme: "T = Tape and reel packing", "/K = Manufacturing technology code"; the bare code lacks the process letter (Table 16, p.39)). The DigiKey and Mouser numbers on this page are for M24C02-DRDW8TP/K.
STMicroelectronics · EEPROM · TSSOP-8
M24C02-DRDW8TP from STMicroelectronics, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | E0 | input | Chip Enable input; must be tied to VSS or VCC; reads as 0 when left floating. |
| 2 | E1 | input | Chip Enable input; must be tied to VSS or VCC; reads as 0 when left floating. |
| 3 | E2 | input | Chip Enable input; must be tied to VSS or VCC; reads as 0 when left floating. |
| 4 | VSS | power_in | Ground; reference for VCC supply voltage. |
| 5 | SDA | bidirectional | Serial Data I/O for I2C bus; open-drain output with pull-up resistor required to VCC. |
| 6 | SCL | input | Serial Clock input; strobes data on SDA line. |
| 7 | WC | input | Write Control input; write operations disabled when high, enabled when low or floating. |
| 8 | VCC | power_in | Supply voltage; operating range 1.7 V to 5.5 V per Table 6. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | TSSOP-8 |
| Category | Memory |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Storage temperature | TSTG | -65 | 150 | °C | 26 | ||
| Input or output range | VIO | -0.5 | 6.5 | V | 26 | ||
| DC output current (SDA = 0) | IOL | 5 | mA | SDA = 0 | 26 | ||
| Supply voltage | VCC | -0.5 | 6.5 | V | 26 | ||
| Electrostatic pulse (Human Body model) | VESD | 4000 | V | Human Body model | 26 | ||
| Supply voltage | VCC | 1.7 | 5.5 | V | voltage range R | 27 | |
| Ambient operating temperature | TA | -40 | 105 | °C | grade 8 | 27 | |
| SCL input rise/fall time, SDA input fall time | 50 | ns | 27 | ||||
| Input capacitance (SDA) | CIN | 8 | pF | 28 | |||
| Input capacitance (other pins) | CIN | 6 | pF | 28 | |||
| Input impedance (WC) | ZL | 30 | kΩ | VIN < 0.3 VCC | 28 | ||
| Input impedance (WC) | ZH | 500 | kΩ | VIN > 0.7 VCC | 28 | ||
| Write cycle endurance | Ncycle | 4e+06 | TA ≤ 25 °C, 1.7 V < VCC < 5.5 V | 28 | |||
| Write cycle endurance | Ncycle | 1.2e+06 | TA = 85 °C, 1.7 V < VCC < 5.5 V | 28 | |||
| Write cycle endurance | Ncycle | 900000 | TA = 105 °C, 1.7 V < VCC < 5.5 V | 28 | |||
| Input leakage current (SCL, SDA, Ei) | ILI | -2 | 2 | µA | VIN = VSS or VCC, device in Standby mode | 29 | |
| Output leakage current | ILO | -2 | 2 | µA | SDA in Hi-Z, external voltage applied on SDA: VSS or VCC | 29 | |
| Supply current (Read) | ICC | 2 | mA | fC = 400 kHz, VCC = 5.5 V | 29 | ||
| Supply current (Read) | ICC | 1 | mA | fC = 400 kHz, VCC = 1.7 V | 29 | ||
| Supply current (Write) | ICC0 | 2 | mA | During tW | 29 | ||
| Standby supply current | ICC1 | 1 | µA | Device not selected, t° = 105 °C, VIN = VSS or VCC, VCC = 1.7 V | 29 | ||
| Standby supply current | ICC1 | 2 | µA | Device not selected, t° = 105 °C, VIN = VSS or VCC, VCC = 2.5 V | 29 | ||
| Standby supply current | ICC1 | 3 | µA | Device not selected, t° = 105 °C, VIN = VSS or VCC, VCC = 5.5 V | 29 | ||
| Input low voltage (SCL, SDA, WC, Ei) | VIL | -0.45 | 0.3 | V | max printed as 0.3 VCC | 29 | |
| Input high voltage (SCL, SDA) | VIH | 0.7 | 6.5 | V | min printed as 0.7 VCC | 29 | |
| Input high voltage (WC, Ei) | VIH | 0.7 | V | min printed as 0.7 VCC; max printed as VCC +0.6 V | 29 | ||
| Output low voltage | VOL | 0.4 | V | IOL = 2.1 mA, VCC = 2.5 V or IOL = 3 mA, VCC = 5.5 V | 29 | ||
| Output low voltage | VOL | 0.3 | V | IOL = 1 mA, VCC = 1.7 V | 29 | ||
| Internal reset threshold voltage | VRES | 0.5 | 1.5 | V | 29 | ||
| Clock frequency (400 kHz) | fC | 400 | kHz | 30 | |||
| Clock pulse width high (tHIGH) | tCHCL | 600 | ns | 30 | |||
| Clock pulse width low (tLOW) | tCLCH | 1300 | ns | 30 | |||
| SDA (out) fall time (tF) | tQL1QL2 | 20 | 120 | ns | CL = 10 pF | 30 | |
| Data in set up time (tSU:DAT) | tDXCH | 100 | ns | 30 | |||
| Data out hold time (tDH) | tCLQX | 100 | ns | 30 | |||
| Clock low to next data valid (access time) | tCLQV | 900 | ns | 30 | |||
| Start condition setup time (tSU:STA) | tCHDL | 600 | ns | 30 | |||
| Start condition hold time (tHD:STA) | tDLCL | 600 | ns | 30 | |||
| Stop condition set up time (tSU:STO) | tCHDH | 600 | ns | 30 | |||
| Time between Stop condition and next Start condition (tBUF) | tDHDL | 1300 | ns | 30 | |||
| WC hold time (after Stop condition) (tHD:WC) | tDHWH | 1 | µs | WC=0 hold time condition to enable the execution of a WRITE command | 30 | ||
| Write time (tWR) | tW | 4 | ms | 30 | |||
| Pulse width ignored (input filter on SCL and SDA), single glitch | tNS | 80 | ns | single glitch | 30 | ||
| Clock frequency (1 MHz) | fC | 0 | 1 | MHz | 31 | ||
| Clock pulse width high (tHIGH) | tCHCL | 260 | ns | 31 | |||
| Clock pulse width low (tLOW) | tCLCH | 500 | ns | 31 | |||
| SDA (out) fall time (tF) | tQL1QL2 | 20 | 120 | ns | 31 | ||
| Data in setup time (tSU:DAT) | tDXCH | 50 | ns | 31 | |||
| Data out hold time (tDH) | tCLQX | 100 | ns | 31 | |||
| Clock low to next data valid (access time) | tCLQV | 450 | ns | 31 | |||
| Start condition setup time (tSU:STA) | tCHDL | 250 | ns | 31 | |||
| Start condition hold time (tHD:STA) | tDLCL | 250 | ns | 31 | |||
| Stop condition setup time (tSU:STO) | tCHDH | 250 | ns | 31 | |||
| Time between Stop condition and next Start condition (tBUF) | tDHDL | 500 | ns | 31 | |||
| WC hold time (after Stop condition) (tHD:WC) | tDHWH | 1 | µs | WC=0 hold time condition to enable the execution of a WRITE command | 31 | ||
| Write time (tWR) | tW | 4 | ms | 31 | |||
| Pulse width ignored (input filter on SCL and SDA) | tNS | 80 | ns | 31 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | TLEAD Lead temperature during soldering see note (1) 1. Compliant with JEDEC Std J-STD-020D (for small body, Sn-Pb or Pb-free assembly), the ST | 26 |
CAD (KiCad official)
- Symbol:
M24C02-DRDW8TP - Footprint:
Package_SO:TSSOP-8_4.4x3mm_P0.65mm - 3D model: TSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
m24c02-drdw8tp-etched.step/m24c02-drdw8tp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);m24c02-drdw8tp.step/m24c02-drdw8tp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (42 pp, sha256
ca15ee09e38f09bf, retrieved 2026-11-12, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).