main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers m24c02-drdw8tp: viewers rendered from the public page · Ray
m24c02-drdw8tp-etched.glb Publish 0.1.0 · Ray
m24c02-drdw8tp-etched.step m24c02-drdw8tp: factory component page (tier=lcsc) · Ray
m24c02-drdw8tp-hero.glb m24c02-drdw8tp: hero GLB from the etched model (keeps the MPN mark) · Ray
m24c02-drdw8tp-hero.overlay.json Publish 0.1.0 · Ray
m24c02-drdw8tp.glb Publish 0.1.0 · Ray
m24c02-drdw8tp.kicad_mod Publish 0.1.0 · Ray
m24c02-drdw8tp.kicad_sym Publish 0.1.0 · Ray
m24c02-drdw8tp.lbr Publish 0.1.0 · Ray
m24c02-drdw8tp.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 8 pins · Ray

M24C02-DRDW8TP

The maker sells this part only as M24C02-DRDW8TP/K (ST ordering information scheme: "T = Tape and reel packing", "/K = Manufacturing technology code"; the bare code lacks the process letter (Table 16, p.39)). The DigiKey and Mouser numbers on this page are for M24C02-DRDW8TP/K.

STMicroelectronics · EEPROM · TSSOP-8

M24C02-DRDW8TP from STMicroelectronics, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 E0 input Chip Enable input; must be tied to VSS or VCC; reads as 0 when left floating.
2 E1 input Chip Enable input; must be tied to VSS or VCC; reads as 0 when left floating.
3 E2 input Chip Enable input; must be tied to VSS or VCC; reads as 0 when left floating.
4 VSS power_in Ground; reference for VCC supply voltage.
5 SDA bidirectional Serial Data I/O for I2C bus; open-drain output with pull-up resistor required to VCC.
6 SCL input Serial Clock input; strobes data on SDA line.
7 WC input Write Control input; write operations disabled when high, enabled when low or floating.
8 VCC power_in Supply voltage; operating range 1.7 V to 5.5 V per Table 6.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package TSSOP-8
Category Memory
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Storage temperature TSTG -65 150 °C 26
Input or output range VIO -0.5 6.5 V 26
DC output current (SDA = 0) IOL 5 mA SDA = 0 26
Supply voltage VCC -0.5 6.5 V 26
Electrostatic pulse (Human Body model) VESD 4000 V Human Body model 26
Supply voltage VCC 1.7 5.5 V voltage range R 27
Ambient operating temperature TA -40 105 °C grade 8 27
SCL input rise/fall time, SDA input fall time 50 ns 27
Input capacitance (SDA) CIN 8 pF 28
Input capacitance (other pins) CIN 6 pF 28
Input impedance (WC) ZL 30 kΩ VIN < 0.3 VCC 28
Input impedance (WC) ZH 500 kΩ VIN > 0.7 VCC 28
Write cycle endurance Ncycle 4e+06 TA ≤ 25 °C, 1.7 V < VCC < 5.5 V 28
Write cycle endurance Ncycle 1.2e+06 TA = 85 °C, 1.7 V < VCC < 5.5 V 28
Write cycle endurance Ncycle 900000 TA = 105 °C, 1.7 V < VCC < 5.5 V 28
Input leakage current (SCL, SDA, Ei) ILI -2 2 µA VIN = VSS or VCC, device in Standby mode 29
Output leakage current ILO -2 2 µA SDA in Hi-Z, external voltage applied on SDA: VSS or VCC 29
Supply current (Read) ICC 2 mA fC = 400 kHz, VCC = 5.5 V 29
Supply current (Read) ICC 1 mA fC = 400 kHz, VCC = 1.7 V 29
Supply current (Write) ICC0 2 mA During tW 29
Standby supply current ICC1 1 µA Device not selected, t° = 105 °C, VIN = VSS or VCC, VCC = 1.7 V 29
Standby supply current ICC1 2 µA Device not selected, t° = 105 °C, VIN = VSS or VCC, VCC = 2.5 V 29
Standby supply current ICC1 3 µA Device not selected, t° = 105 °C, VIN = VSS or VCC, VCC = 5.5 V 29
Input low voltage (SCL, SDA, WC, Ei) VIL -0.45 0.3 V max printed as 0.3 VCC 29
Input high voltage (SCL, SDA) VIH 0.7 6.5 V min printed as 0.7 VCC 29
Input high voltage (WC, Ei) VIH 0.7 V min printed as 0.7 VCC; max printed as VCC +0.6 V 29
Output low voltage VOL 0.4 V IOL = 2.1 mA, VCC = 2.5 V or IOL = 3 mA, VCC = 5.5 V 29
Output low voltage VOL 0.3 V IOL = 1 mA, VCC = 1.7 V 29
Internal reset threshold voltage VRES 0.5 1.5 V 29
Clock frequency (400 kHz) fC 400 kHz 30
Clock pulse width high (tHIGH) tCHCL 600 ns 30
Clock pulse width low (tLOW) tCLCH 1300 ns 30
SDA (out) fall time (tF) tQL1QL2 20 120 ns CL = 10 pF 30
Data in set up time (tSU:DAT) tDXCH 100 ns 30
Data out hold time (tDH) tCLQX 100 ns 30
Clock low to next data valid (access time) tCLQV 900 ns 30
Start condition setup time (tSU:STA) tCHDL 600 ns 30
Start condition hold time (tHD:STA) tDLCL 600 ns 30
Stop condition set up time (tSU:STO) tCHDH 600 ns 30
Time between Stop condition and next Start condition (tBUF) tDHDL 1300 ns 30
WC hold time (after Stop condition) (tHD:WC) tDHWH 1 µs WC=0 hold time condition to enable the execution of a WRITE command 30
Write time (tWR) tW 4 ms 30
Pulse width ignored (input filter on SCL and SDA), single glitch tNS 80 ns single glitch 30
Clock frequency (1 MHz) fC 0 1 MHz 31
Clock pulse width high (tHIGH) tCHCL 260 ns 31
Clock pulse width low (tLOW) tCLCH 500 ns 31
SDA (out) fall time (tF) tQL1QL2 20 120 ns 31
Data in setup time (tSU:DAT) tDXCH 50 ns 31
Data out hold time (tDH) tCLQX 100 ns 31
Clock low to next data valid (access time) tCLQV 450 ns 31
Start condition setup time (tSU:STA) tCHDL 250 ns 31
Start condition hold time (tHD:STA) tDLCL 250 ns 31
Stop condition setup time (tSU:STO) tCHDH 250 ns 31
Time between Stop condition and next Start condition (tBUF) tDHDL 500 ns 31
WC hold time (after Stop condition) (tHD:WC) tDHWH 1 µs WC=0 hold time condition to enable the execution of a WRITE command 31
Write time (tWR) tW 4 ms 31
Pulse width ignored (input filter on SCL and SDA) tNS 80 ns 31

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin TLEAD Lead temperature during soldering see note (1) 1. Compliant with JEDEC Std J-STD-020D (for small body, Sn-Pb or Pb-free assembly), the ST 26

CAD (KiCad official)

  • Symbol: M24C02-DRDW8TP
  • Footprint: Package_SO:TSSOP-8_4.4x3mm_P0.65mm
  • 3D model: TSSOP-8 (KiCad packages3D, STEP)
  • 3D model files: m24c02-drdw8tp-etched.step / m24c02-drdw8tp-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); m24c02-drdw8tp.step / m24c02-drdw8tp.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (42 pp, sha256 ca15ee09e38f09bf, retrieved 2026-11-12, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF