Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

STM32L051K8U7TR

STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · UFQFPN-32(5x5)

STM32L051K8U7TR from STMicroelectronics, in a UFQFPN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in External power supply for the I/Os and the internal regulator, 1.65 V to 3.6 V; VDD and VDDA should come from the same source, with at most 300 mV difference.
2 PC14-OSC32_IN bidirectional 5 V tolerant (FT) I/O, function PC14 after reset, and alternate use as the OSC32_IN input of the 32.768 kHz LSE oscillator.
3 PC15-OSC32_OUT (PC15) bidirectional Standard 3.3 V (TC) I/O, function PC15 after reset, and alternate use as the OSC32_OUT output of the 32.768 kHz LSE oscillator.
4 NRST bidirectional Bidirectional reset pin with embedded weak pull-up (RPU 25 to 65 kΩ); input low level VIL max 0.8 V and input high level VIH min 1.4 V.
5 VDDA power_in External analog supply for the ADC, reset blocks, RCs and PLL; must be the same voltage as VDD, 1.65 V to 3.6 V.
6 PA0 bidirectional Standard 3.3 V (TC) I/O, also ADC_IN0 and a fast ADC channel; alternate functions TIM2_CH1, USART2_CTS, TIM2_ETR and COMP1_OUT, additional COMP1_INM6 and RTC_TAMP2/WKUP1.
7 PA1 bidirectional 5 V tolerant (FT) I/O; alternate functions EVENTOUT, TIM2_CH2, USART2_RTS/USART2_DE and TIM21_ETR, additional COMP1_INP and ADC_IN1.
8 PA2 bidirectional 5 V tolerant (FT) I/O; alternate functions TIM21_CH1, TIM2_CH3, USART2_TX and COMP2_OUT, additional COMP2_INM6 and ADC_IN2.
9 PA3 bidirectional 5 V tolerant (FT) I/O; alternate functions TIM21_CH2, TIM2_CH4 and USART2_RX, additional COMP2_INP and ADC_IN3.
10 PA4 bidirectional Standard 3.3 V (TC) I/O and fast ADC channel; alternate functions SPI1_NSS, USART2_CK and TIM22_ETR, additional COMP1_INM4, COMP2_INM4 and ADC_IN4.
11 PA5 bidirectional Standard 3.3 V (TC) I/O and fast ADC channel; alternate functions SPI1_SCK, TIM2_ETR and TIM2_CH1, additional COMP1_INM5, COMP2_INM5 and ADC_IN5.
12 PA6 bidirectional 5 V tolerant (FT) I/O; alternate functions SPI1_MISO, LPUART1_CTS, TIM22_CH1, EVENTOUT and COMP1_OUT, additional ADC_IN6.
13 PA7 bidirectional 5 V tolerant (FT) I/O; alternate functions SPI1_MOSI, TIM22_CH2, EVENTOUT and COMP2_OUT, additional ADC_IN7.
14 PB0 bidirectional 5 V tolerant (FT) I/O; alternate function EVENTOUT, additional ADC_IN8 and VREF_OUT.
15 PB1 bidirectional 5 V tolerant (FT) I/O; alternate function LPUART1_RTS/LPUART1_DE, additional ADC_IN9 and VREF_OUT.
16 PB2 bidirectional 5 V tolerant (FT) I/O; alternate function LPTIM1_OUT.
17 VDD power_in External power supply for the I/Os and the internal regulator, 1.65 V to 3.6 V; same supply requirement as pin 1.
18 PA8 bidirectional 5 V tolerant (FT) I/O; alternate functions MCO, EVENTOUT and USART1_CK.
19 PA9 bidirectional 5 V tolerant (FT) I/O; alternate functions MCO and USART1_TX.
20 PA10 bidirectional 5 V tolerant (FT) I/O; alternate function USART1_RX.
21 PA11 bidirectional 5 V tolerant (FT) I/O; alternate functions SPI1_MISO, EVENTOUT, USART1_CTS and COMP1_OUT.
22 PA12 bidirectional 5 V tolerant (FT) I/O; alternate functions SPI1_MOSI, EVENTOUT, USART1_RTS/USART1_DE and COMP2_OUT.
23 PA13 bidirectional 5 V tolerant (FT) I/O; alternate function SWDIO (serial wire debug data).
24 PA14 bidirectional 5 V tolerant (FT) I/O; alternate functions SWCLK (serial wire debug clock) and USART2_TX.
25 PA15 bidirectional 5 V tolerant (FT) I/O; alternate functions SPI1_NSS, TIM2_ETR, EVENTOUT, USART2_RX and TIM2_CH1.
26 PB3 bidirectional 5 V tolerant (FT) I/O; alternate functions SPI1_SCK, TIM2_CH2 and EVENTOUT, additional COMP2_INN.
27 PB4 bidirectional 5 V tolerant (FT) I/O; alternate functions SPI1_MISO, EVENTOUT and TIM22_CH1, additional COMP2_INP.
28 PB5 bidirectional 5 V tolerant (FT) I/O; alternate functions SPI1_MOSI, LPTIM1_IN1, I2C1_SMBA and TIM22_CH2, additional COMP2_INP.
29 PB6 bidirectional 5 V tolerant, Fm+ capable (FTf) I/O; alternate functions USART1_TX, I2C1_SCL and LPTIM1_ETR, additional COMP2_INP.
30 PB7 bidirectional 5 V tolerant, Fm+ capable (FTf) I/O; alternate functions USART1_RX, I2C1_SDA and LPTIM1_IN2, additional COMP2_INP and PVD_IN.
31 BOOT0 input Dedicated BOOT0 pin used with the nBOOT1 option bit to select the boot mode at startup; input voltage range 0 to 5.5 V.
32 PB8 bidirectional 5 V tolerant, Fm+ capable (FTf) I/O; alternate function I2C1_SCL.
33 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package UFQFPN-32(5x5)
Category Embedded Processors & Controllers
Pins 33

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
External main supply voltage (including VDDA, VDDIO2, VDD) VDD-VSS -0.3 4 V 48
Input voltage on TC pins VIN 4 V 48
Input voltage on any other pin VIN 4 V 48
Variations between different VDDx power pins /ΔVDD/ 50 mV 48
Variations between any VDDx and VDDA power pins /VDDA-VDDx/ 300 mV 48
Variations between all different ground pins /ΔVSS/ 50 mV 48
Allowed voltage difference for VREF+ > VDDA VREF+ -VDDA 0.4 V 48
Total current into sum of all VDD power lines (source) ΣIVDD 105 mA 49
Total current out of sum of all VSS ground lines (sink) ΣIVSS 105 mA 49
Total current into VDDIO2 power line (source) ΣIVDDIO2 25 mA 49
Maximum current into each VDD power pin (source) IVDD(PIN) 100 mA 49
Maximum current out of each VSS ground pin (sink) IVSS(PIN) 100 mA 49
Output current sunk by any I/O and control pin except FTf pins IIO 16 mA 49
Output current sunk by FTf pins IIO 22 mA 49
Output current sourced by any I/O and control pin IIO -16 mA 49
Total output current sunk by sum of all IOs and control pins except PA11 and PA12 ΣIIO(PIN) 90 mA 49
Total output current sunk by PA11 and PA12 ΣIIO(PIN) 25 mA 49
Total output current sourced by sum of all IOs and control pins ΣIIO(PIN) -90 mA 49
Injected current on FT, FTf, RST and B pins IINJ(PIN) -5 0 mA Positive current injection not possible on these I/Os 49
Injected current on TC pin IINJ(PIN) -5 5 mA 49
Total injected current (sum of all I/O and control pins) ΣIINJ(PIN) -25 25 mA 49
Storage temperature range TSTG -65 150 °C 49
Maximum junction temperature TJ 150 °C 49
Internal AHB clock frequency fHCLK 0 32 MHz 50
Internal APB1 clock frequency fPCLK1 0 32 MHz 50
Internal APB2 clock frequency fPCLK2 0 32 MHz 50
Standard operating voltage VDD 1.65 3.6 V BOR detector disabled 50
Standard operating voltage VDD 1.8 3.6 V BOR detector enabled, at power-on 50
Analog operating voltage (all features) VDDA 1.65 3.6 V Must be the same voltage as VDD 50
Input voltage on FT, FTf and RST pins VIN -0.3 5.5 V 2.0 V ≤ VDD ≤ 3.6 V 50
Input voltage on FT, FTf and RST pins VIN -0.3 5.2 V 1.65 V ≤ VDD ≤ 2.0 V 50
Input voltage on BOOT0 pin VIN 0 5.5 V 50
Input voltage on TC pin VIN -0.3 V 50
Power dissipation at TA = 85 °C (range 6) or TA = 105 °C (range 7), UFQFPN32 PD 526 mW 50
Power dissipation at TA = 125 °C (range 3), UFQFPN32 PD 132 mW 50
Temperature range (maximum power dissipation, range 6) TA -40 85 °C Maximum power dissipation (range 6) 51
Temperature range (maximum power dissipation, range 7) TA -40 105 °C Maximum power dissipation (range 7) 51
Temperature range (maximum power dissipation, range 3) TA -40 125 °C Maximum power dissipation (range 3) 51
Junction temperature range (range 6) TJ -40 105 °C -40 °C ≤ TA ≤ 85 °C 51
Junction temperature range (range 7) TJ -40 125 °C -40 °C ≤ TA ≤ 105 °C 51
Junction temperature range (range 3) TJ -40 130 °C -40 °C ≤ TA ≤ 125 °C 51
Power-on/power down reset threshold VPOR/PDR 1 1.5 1.65 V Falling edge 52
Power-on/power down reset threshold VPOR/PDR 1.3 1.5 1.65 V Rising edge 52
Brown-out reset threshold 0 VBOR0 1.67 1.7 1.74 V Falling edge 52
Brown-out reset threshold 0 VBOR0 1.69 1.76 1.8 V Rising edge 52
Internal reference voltage VREFINT out 1.202 1.224 1.242 V -40 °C < TJ < +125 °C 53
Temperature coefficient TCoeff 25 100 ppm/°C -40 °C < TJ < +125 °C 53
Voltage coefficient VDDCoeff 2000 ppm/V 3.0 V < VDDA < 3.6 V 53
Accuracy of the factory-calibrated HSI16 oscillator ACCHSI16 -5.45 3.25 % VDDA = 1.65 V to 3.6 V, TA = − 40 to 125 °C 70
Accuracy of the factory-calibrated HSI16 oscillator ACCHSI16 -1.5 1.5 % VDDA = 3.0 V, TA = 0 to 55 °C 70
LSI frequency fLSI 26 38 56 kHz 71
Supply current in Run mode, code executed from Flash IDD (Run from Flash) 6.25 7 mA HSI clock, Range 1, VCORE=1.8 V, VOS[1:0]=01, 32 MHz 55
Supply current in Low-power run mode IDD (LP Run) 8.5 10 µA MSI clock = 65 kHz, fHCLK = 32 kHz, TA = − 40 to 25°C 59
Supply current in Stop mode IDD (Stop) 0.41 1 µA TA = − 40 to 25°C 61
Supply current in Stop mode IDD (Stop) 11 24 µA TA = 125°C 61
Supply current in Standby mode IDD (Standby) 0.29 0.6 µA Independent watchdog and LSI OFF, TA = − 40 to 25°C 62
Supply current in Standby mode IDD (Standby) 2.6 7 µA Independent watchdog and LSI OFF, TA = 125 °C 62

CAD (KiCad official)

  • Symbol: STM32L051K8U7TR
  • Footprint: Package_DFN_QFN:UFQFPN-32-1EP_5x5mm_P0.5mm_EP3.5x3.5mm
  • 3D model: UFQFPN-32(5x5), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.55 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: stm32l051k8u7tr-etched.step / stm32l051k8u7tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32l051k8u7tr.step / stm32l051k8u7tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (133 pp, sha256 232fdca5c41218a1, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF