3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSTM32L051K8U7TR
STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · UFQFPN-32(5x5)
STM32L051K8U7TR from STMicroelectronics, in a UFQFPN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | External power supply for the I/Os and the internal regulator, 1.65 V to 3.6 V; VDD and VDDA should come from the same source, with at most 300 mV difference. |
| 2 | PC14-OSC32_IN | bidirectional | 5 V tolerant (FT) I/O, function PC14 after reset, and alternate use as the OSC32_IN input of the 32.768 kHz LSE oscillator. |
| 3 | PC15-OSC32_OUT (PC15) | bidirectional | Standard 3.3 V (TC) I/O, function PC15 after reset, and alternate use as the OSC32_OUT output of the 32.768 kHz LSE oscillator. |
| 4 | NRST | bidirectional | Bidirectional reset pin with embedded weak pull-up (RPU 25 to 65 kΩ); input low level VIL max 0.8 V and input high level VIH min 1.4 V. |
| 5 | VDDA | power_in | External analog supply for the ADC, reset blocks, RCs and PLL; must be the same voltage as VDD, 1.65 V to 3.6 V. |
| 6 | PA0 | bidirectional | Standard 3.3 V (TC) I/O, also ADC_IN0 and a fast ADC channel; alternate functions TIM2_CH1, USART2_CTS, TIM2_ETR and COMP1_OUT, additional COMP1_INM6 and RTC_TAMP2/WKUP1. |
| 7 | PA1 | bidirectional | 5 V tolerant (FT) I/O; alternate functions EVENTOUT, TIM2_CH2, USART2_RTS/USART2_DE and TIM21_ETR, additional COMP1_INP and ADC_IN1. |
| 8 | PA2 | bidirectional | 5 V tolerant (FT) I/O; alternate functions TIM21_CH1, TIM2_CH3, USART2_TX and COMP2_OUT, additional COMP2_INM6 and ADC_IN2. |
| 9 | PA3 | bidirectional | 5 V tolerant (FT) I/O; alternate functions TIM21_CH2, TIM2_CH4 and USART2_RX, additional COMP2_INP and ADC_IN3. |
| 10 | PA4 | bidirectional | Standard 3.3 V (TC) I/O and fast ADC channel; alternate functions SPI1_NSS, USART2_CK and TIM22_ETR, additional COMP1_INM4, COMP2_INM4 and ADC_IN4. |
| 11 | PA5 | bidirectional | Standard 3.3 V (TC) I/O and fast ADC channel; alternate functions SPI1_SCK, TIM2_ETR and TIM2_CH1, additional COMP1_INM5, COMP2_INM5 and ADC_IN5. |
| 12 | PA6 | bidirectional | 5 V tolerant (FT) I/O; alternate functions SPI1_MISO, LPUART1_CTS, TIM22_CH1, EVENTOUT and COMP1_OUT, additional ADC_IN6. |
| 13 | PA7 | bidirectional | 5 V tolerant (FT) I/O; alternate functions SPI1_MOSI, TIM22_CH2, EVENTOUT and COMP2_OUT, additional ADC_IN7. |
| 14 | PB0 | bidirectional | 5 V tolerant (FT) I/O; alternate function EVENTOUT, additional ADC_IN8 and VREF_OUT. |
| 15 | PB1 | bidirectional | 5 V tolerant (FT) I/O; alternate function LPUART1_RTS/LPUART1_DE, additional ADC_IN9 and VREF_OUT. |
| 16 | PB2 | bidirectional | 5 V tolerant (FT) I/O; alternate function LPTIM1_OUT. |
| 17 | VDD | power_in | External power supply for the I/Os and the internal regulator, 1.65 V to 3.6 V; same supply requirement as pin 1. |
| 18 | PA8 | bidirectional | 5 V tolerant (FT) I/O; alternate functions MCO, EVENTOUT and USART1_CK. |
| 19 | PA9 | bidirectional | 5 V tolerant (FT) I/O; alternate functions MCO and USART1_TX. |
| 20 | PA10 | bidirectional | 5 V tolerant (FT) I/O; alternate function USART1_RX. |
| 21 | PA11 | bidirectional | 5 V tolerant (FT) I/O; alternate functions SPI1_MISO, EVENTOUT, USART1_CTS and COMP1_OUT. |
| 22 | PA12 | bidirectional | 5 V tolerant (FT) I/O; alternate functions SPI1_MOSI, EVENTOUT, USART1_RTS/USART1_DE and COMP2_OUT. |
| 23 | PA13 | bidirectional | 5 V tolerant (FT) I/O; alternate function SWDIO (serial wire debug data). |
| 24 | PA14 | bidirectional | 5 V tolerant (FT) I/O; alternate functions SWCLK (serial wire debug clock) and USART2_TX. |
| 25 | PA15 | bidirectional | 5 V tolerant (FT) I/O; alternate functions SPI1_NSS, TIM2_ETR, EVENTOUT, USART2_RX and TIM2_CH1. |
| 26 | PB3 | bidirectional | 5 V tolerant (FT) I/O; alternate functions SPI1_SCK, TIM2_CH2 and EVENTOUT, additional COMP2_INN. |
| 27 | PB4 | bidirectional | 5 V tolerant (FT) I/O; alternate functions SPI1_MISO, EVENTOUT and TIM22_CH1, additional COMP2_INP. |
| 28 | PB5 | bidirectional | 5 V tolerant (FT) I/O; alternate functions SPI1_MOSI, LPTIM1_IN1, I2C1_SMBA and TIM22_CH2, additional COMP2_INP. |
| 29 | PB6 | bidirectional | 5 V tolerant, Fm+ capable (FTf) I/O; alternate functions USART1_TX, I2C1_SCL and LPTIM1_ETR, additional COMP2_INP. |
| 30 | PB7 | bidirectional | 5 V tolerant, Fm+ capable (FTf) I/O; alternate functions USART1_RX, I2C1_SDA and LPTIM1_IN2, additional COMP2_INP and PVD_IN. |
| 31 | BOOT0 | input | Dedicated BOOT0 pin used with the nBOOT1 option bit to select the boot mode at startup; input voltage range 0 to 5.5 V. |
| 32 | PB8 | bidirectional | 5 V tolerant, Fm+ capable (FTf) I/O; alternate function I2C1_SCL. |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | UFQFPN-32(5x5) |
| Category | Embedded Processors & Controllers |
| Pins | 33 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External main supply voltage (including VDDA, VDDIO2, VDD) | VDD-VSS | -0.3 | 4 | V | 48 | ||
| Input voltage on TC pins | VIN | 4 | V | 48 | |||
| Input voltage on any other pin | VIN | 4 | V | 48 | |||
| Variations between different VDDx power pins | /ΔVDD/ | 50 | mV | 48 | |||
| Variations between any VDDx and VDDA power pins | /VDDA-VDDx/ | 300 | mV | 48 | |||
| Variations between all different ground pins | /ΔVSS/ | 50 | mV | 48 | |||
| Allowed voltage difference for VREF+ > VDDA | VREF+ -VDDA | 0.4 | V | 48 | |||
| Total current into sum of all VDD power lines (source) | ΣIVDD | 105 | mA | 49 | |||
| Total current out of sum of all VSS ground lines (sink) | ΣIVSS | 105 | mA | 49 | |||
| Total current into VDDIO2 power line (source) | ΣIVDDIO2 | 25 | mA | 49 | |||
| Maximum current into each VDD power pin (source) | IVDD(PIN) | 100 | mA | 49 | |||
| Maximum current out of each VSS ground pin (sink) | IVSS(PIN) | 100 | mA | 49 | |||
| Output current sunk by any I/O and control pin except FTf pins | IIO | 16 | mA | 49 | |||
| Output current sunk by FTf pins | IIO | 22 | mA | 49 | |||
| Output current sourced by any I/O and control pin | IIO | -16 | mA | 49 | |||
| Total output current sunk by sum of all IOs and control pins except PA11 and PA12 | ΣIIO(PIN) | 90 | mA | 49 | |||
| Total output current sunk by PA11 and PA12 | ΣIIO(PIN) | 25 | mA | 49 | |||
| Total output current sourced by sum of all IOs and control pins | ΣIIO(PIN) | -90 | mA | 49 | |||
| Injected current on FT, FTf, RST and B pins | IINJ(PIN) | -5 | 0 | mA | Positive current injection not possible on these I/Os | 49 | |
| Injected current on TC pin | IINJ(PIN) | -5 | 5 | mA | 49 | ||
| Total injected current (sum of all I/O and control pins) | ΣIINJ(PIN) | -25 | 25 | mA | 49 | ||
| Storage temperature range | TSTG | -65 | 150 | °C | 49 | ||
| Maximum junction temperature | TJ | 150 | °C | 49 | |||
| Internal AHB clock frequency | fHCLK | 0 | 32 | MHz | 50 | ||
| Internal APB1 clock frequency | fPCLK1 | 0 | 32 | MHz | 50 | ||
| Internal APB2 clock frequency | fPCLK2 | 0 | 32 | MHz | 50 | ||
| Standard operating voltage | VDD | 1.65 | 3.6 | V | BOR detector disabled | 50 | |
| Standard operating voltage | VDD | 1.8 | 3.6 | V | BOR detector enabled, at power-on | 50 | |
| Analog operating voltage (all features) | VDDA | 1.65 | 3.6 | V | Must be the same voltage as VDD | 50 | |
| Input voltage on FT, FTf and RST pins | VIN | -0.3 | 5.5 | V | 2.0 V ≤ VDD ≤ 3.6 V | 50 | |
| Input voltage on FT, FTf and RST pins | VIN | -0.3 | 5.2 | V | 1.65 V ≤ VDD ≤ 2.0 V | 50 | |
| Input voltage on BOOT0 pin | VIN | 0 | 5.5 | V | 50 | ||
| Input voltage on TC pin | VIN | -0.3 | V | 50 | |||
| Power dissipation at TA = 85 °C (range 6) or TA = 105 °C (range 7), UFQFPN32 | PD | 526 | mW | 50 | |||
| Power dissipation at TA = 125 °C (range 3), UFQFPN32 | PD | 132 | mW | 50 | |||
| Temperature range (maximum power dissipation, range 6) | TA | -40 | 85 | °C | Maximum power dissipation (range 6) | 51 | |
| Temperature range (maximum power dissipation, range 7) | TA | -40 | 105 | °C | Maximum power dissipation (range 7) | 51 | |
| Temperature range (maximum power dissipation, range 3) | TA | -40 | 125 | °C | Maximum power dissipation (range 3) | 51 | |
| Junction temperature range (range 6) | TJ | -40 | 105 | °C | -40 °C ≤ TA ≤ 85 °C | 51 | |
| Junction temperature range (range 7) | TJ | -40 | 125 | °C | -40 °C ≤ TA ≤ 105 °C | 51 | |
| Junction temperature range (range 3) | TJ | -40 | 130 | °C | -40 °C ≤ TA ≤ 125 °C | 51 | |
| Power-on/power down reset threshold | VPOR/PDR | 1 | 1.5 | 1.65 | V | Falling edge | 52 |
| Power-on/power down reset threshold | VPOR/PDR | 1.3 | 1.5 | 1.65 | V | Rising edge | 52 |
| Brown-out reset threshold 0 | VBOR0 | 1.67 | 1.7 | 1.74 | V | Falling edge | 52 |
| Brown-out reset threshold 0 | VBOR0 | 1.69 | 1.76 | 1.8 | V | Rising edge | 52 |
| Internal reference voltage | VREFINT out | 1.202 | 1.224 | 1.242 | V | -40 °C < TJ < +125 °C | 53 |
| Temperature coefficient | TCoeff | 25 | 100 | ppm/°C | -40 °C < TJ < +125 °C | 53 | |
| Voltage coefficient | VDDCoeff | 2000 | ppm/V | 3.0 V < VDDA < 3.6 V | 53 | ||
| Accuracy of the factory-calibrated HSI16 oscillator | ACCHSI16 | -5.45 | 3.25 | % | VDDA = 1.65 V to 3.6 V, TA = − 40 to 125 °C | 70 | |
| Accuracy of the factory-calibrated HSI16 oscillator | ACCHSI16 | -1.5 | 1.5 | % | VDDA = 3.0 V, TA = 0 to 55 °C | 70 | |
| LSI frequency | fLSI | 26 | 38 | 56 | kHz | 71 | |
| Supply current in Run mode, code executed from Flash | IDD (Run from Flash) | 6.25 | 7 | mA | HSI clock, Range 1, VCORE=1.8 V, VOS[1:0]=01, 32 MHz | 55 | |
| Supply current in Low-power run mode | IDD (LP Run) | 8.5 | 10 | µA | MSI clock = 65 kHz, fHCLK = 32 kHz, TA = − 40 to 25°C | 59 | |
| Supply current in Stop mode | IDD (Stop) | 0.41 | 1 | µA | TA = − 40 to 25°C | 61 | |
| Supply current in Stop mode | IDD (Stop) | 11 | 24 | µA | TA = 125°C | 61 | |
| Supply current in Standby mode | IDD (Standby) | 0.29 | 0.6 | µA | Independent watchdog and LSI OFF, TA = − 40 to 25°C | 62 | |
| Supply current in Standby mode | IDD (Standby) | 2.6 | 7 | µA | Independent watchdog and LSI OFF, TA = 125 °C | 62 |
CAD (KiCad official)
- Symbol:
STM32L051K8U7TR - Footprint:
Package_DFN_QFN:UFQFPN-32-1EP_5x5mm_P0.5mm_EP3.5x3.5mm - 3D model: UFQFPN-32(5x5), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.55 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
stm32l051k8u7tr-etched.step/stm32l051k8u7tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32l051k8u7tr.step/stm32l051k8u7tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (133 pp, sha256
232fdca5c41218a1, retrieved 2026-11-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).