3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownNB3N3002DTG
onsemi · Clock Generators / Frequency Synthesizers / PLL · TSSOP-16
NB3N3002DTG from onsemi, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SEL0 | input | LVTTL/LVCMOS frequency select input 0 with internal pullup resistor to VDD (defaults high when open); see output select Table 2. |
| 2 | SEL1 | input | LVTTL/LVCMOS frequency select input 1 with internal pullup resistor to VDD (defaults high when open); see output select Table 2. |
| 3 | GND | power_in | Ground 0 V return path for the device. |
| 4 | X1/CLK | input | Crystal or clock input; connect to a 25 MHz crystal or single-ended clock. |
| 5 | X2 | input | Crystal input; connect to a 25 MHz crystal or leave unconnected for clock input. |
| 6 | OE | input | Output enable input that tri-states the outputs when connected to GND, with internal pullup resistor to VDD. |
| 7 | GND | power_in | Ground 0 V return path for the device. |
| 8 | GND | power_in | Ground 0 V return path for the device. |
| 9 | IREF | output | Output current reference pin; a precision resistor (typ. 475 ohm) is connected from this pin to GND to set the output current. |
| 10 | NC | unconnected | No connect; do not connect. |
| 11 | NC | unconnected | No connect; do not connect. |
| 12 | VDD | power_in | Positive supply voltage pin, connected to +3.3 V supply. |
| 13 | GND | power_in | Ground 0 V return path for the device. |
| 14 | CLK# | output | Inverted HCSL (or LVDS with proper termination) clock output. |
| 15 | CLK | output | Noninverted HCSL (or LVDS with proper termination) clock output. |
| 16 | VDD | power_in | Positive supply voltage pin, connected to +3.3 V supply. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | TSSOP-16 |
| Category | Clock and Timing |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output HIGH voltage | VOH | 660 | 700 | 850 | mV | See Figure 4 | 3 |
| Output LOW voltage | VOL | -150 | 0 | 150 | mV | See Figure 4 | 3 |
| Crossing voltage magnitude (absolute) | Vcross | 250 | 400 | mV | 3 | ||
| Change in magnitude of Vcross | Vcross | 150 | mV | 3 | |||
| Power supply current | IDD | 65 | 95 | mA | Note 4 | 3 | |
| Power supply current when OE is set low | IDDOE | 35 | 65 | mA | OE set low | 3 | |
| Output clock frequency | fCLKOUT | 25 | 200 | MHz | 4 | ||
| Output clock duty cycle | tDUTY_CYCLE | 45 | 50 | 55 | % | Measured at cross point | 4 |
| Output risetime | tR | 175 | 340 | 700 | ps | Measured from 175 mV to 525 mV, Figure 4 | 4 |
| Output falltime | tF | 175 | 340 | 700 | ps | Measured from 525 mV to 175 mV, Figure 4 | 4 |
| Output risetime variation (single-ended) | 125 | ps | Single-ended | 4 | |||
| Output falltime variation (single-ended) | 125 | ps | Single-ended | 4 | |||
| Cycle-to-cycle RMS jitter | 2 | 5 | ps | fCLK = 200 MHz (Note 9) | 4 | ||
| Cycle-to-cycle peak to peak jitter | 20 | 35 | ps | fCLK = 200 MHz (Note 9) | 4 | ||
| Period RMS jitter | 1.5 | 3 | ps | fCLK = 200 MHz (Note 9) | 4 | ||
| Period peak-to-peak jitter | 10 | 20 | ps | fCLK = 200 MHz (Note 9) | 4 | ||
| RMS phase jitter | tjit() | 0.25 | 0.5 | ps | at 125 MHz @ 1 MHz - 40 MHz | 4 | |
| TIE RMS jitter | tjitter (TIE) | 2.5 | ps | fCLK = 200 MHz (Note 8) | 4 | ||
| OE output enable/disable time | 1 | s | 4 | ||||
| Clock/crystal input frequency | fCLKIN | 25 | MHz | 4 | |||
| RMS phase jitter PCIe Gen 1 | tjphPCIeG1 | 10 | 16 | 86 | ps (p−p) | PCIe Gen 1 (Notes 12 and 13) | 5 |
| RMS phase jitter PCIe Gen 2 Lo Band | tjphPCIeG2 | 0.2 | 0.25 | 3 | ps (rms) | PCIe Gen 2 Lo Band 10 kHz < f < 1.5 MHz (Note 12) | 5 |
| RMS phase jitter PCIe Gen 2 High Band | tjphPCIeG2 | 0.9 | 1.2 | 3.1 | ps (rms) | PCIe Gen 2 High Band 1.5 MHz < f < Nyquist (50 MHz) (Note 12) | 5 |
| RMS phase jitter PCIe Gen 3 | tjphPCIeG3 | 0.2 | 0.3 | 1 | ps (rms) | PCIe Gen 3 (PLL BW of 2−4 MHz, CDR = 10 MHz) (Note 12) | 5 |
| RMS phase jitter PCIe Gen 4 | tjphPCIeG4 | 0.21 | 0.3 | 0.5 | ps (rms) | PCIe Gen 4 (PLL BW of 2−4 MHz, CDR = 10 MHz) (Note 12) | 5 |
| RMS phase jitter UPI | tjphUPI | 0.62 | 0.7 | 1 | ps (rms) | UPI (9.6 Gb/s, 10.4 Gb/s or 11.2 Gb/s, 100 MHz, 12 UI) | 5 |
| RMS phase jitter QPI & SMI | tjphQPI_SMI | 0.1 | 0.3 | 0.5 | ps (rms) | QPI & SMI (100.00 MHz or 133.33 MHz, 4.8 Gb/s, 6.4 Gb/s 12UI) (Note 14) | 5 |
| RMS phase jitter QPI & SMI | tjphQPI_SMI | 0.1 | 0.15 | 0.3 | ps (rms) | QPI & SMI (100.00 MHz, 8.0 Gb/s, 12UI) (Note 14) | 5 |
| RMS phase jitter QPI & SMI | tjphQPI_SMI | 0.07 | 0.1 | 0.2 | ps (rms) | QPI & SMI (100.00 MHz, 9.6 Gb/s, 12UI) (Note 14) | 5 |
| Positive power supply | VDD | 4.6 | V | GND = 0 V | 3 | ||
| Input voltage (VIN) | VI | -0.5 | V | GND = 0 V | 3 | ||
| Storage temperature range | Tstg | -65 | 150 | °C | 3 | ||
| Wave solder temperature | Tsol | 265 | °C | Wave solder | 3 | ||
| Operating temperature range | TA | -40 | 85 | °C | 3 | ||
| Positive power supply (operating range) | VDD | 3.3 | V | Operating range 3.3 V | 1 | ||
| Supply voltage tolerance | VDD | -5 | 5 | % | Operating range 3.3 V | 1 | |
| Pull-up resistor OE, SEL0 and SEL1 | RPU | 100 | k | OE, SEL0 and SEL1 pull-up resistor | 3 | ||
| Thermal resistance junction-to-ambient, 0 lfpm | JA | 138 | °C/W | 0 lfpm, TSSOP-16 | 3 | ||
| Thermal resistance junction-to-ambient, 500 lfpm | JA | 108 | °C/W | 500 lfpm, TSSOP-16 | 3 | ||
| Thermal resistance junction-to-case | JC | 33 | 36 | °C/W | TSSOP-16 (Note 3) | 3 |
CAD (KiCad official)
- Symbol:
NB3N3002DTG - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
nb3n3002dtg-etched.step/nb3n3002dtg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);nb3n3002dtg.step/nb3n3002dtg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (8 pp, sha256
727c2c8715113051, retrieved 2026-11-09, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).