main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers nb3n3002dtg: viewers · Ray
nb3n3002dtg-etched.glb Publish 0.1.0 · Ray
nb3n3002dtg-etched.step nb3n3002dtg: factory component page (tier=mfr) · Ray
nb3n3002dtg-hero.glb nb3n3002dtg: hero GLB from the etched model (keeps the MPN mark) · Ray
nb3n3002dtg-hero.overlay.json Publish 0.1.0 · Ray
nb3n3002dtg.glb Publish 0.1.0 · Ray
nb3n3002dtg.kicad_mod Publish 0.1.0 · Ray
nb3n3002dtg.kicad_sym Publish 0.1.0 · Ray
nb3n3002dtg.lbr Publish 0.1.0 · Ray
nb3n3002dtg.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 16 pins · Ray

NB3N3002DTG

onsemi · Clock Generators / Frequency Synthesizers / PLL · TSSOP-16

NB3N3002DTG from onsemi, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SEL0 input LVTTL/LVCMOS frequency select input 0 with internal pullup resistor to VDD (defaults high when open); see output select Table 2.
2 SEL1 input LVTTL/LVCMOS frequency select input 1 with internal pullup resistor to VDD (defaults high when open); see output select Table 2.
3 GND power_in Ground 0 V return path for the device.
4 X1/CLK input Crystal or clock input; connect to a 25 MHz crystal or single-ended clock.
5 X2 input Crystal input; connect to a 25 MHz crystal or leave unconnected for clock input.
6 OE input Output enable input that tri-states the outputs when connected to GND, with internal pullup resistor to VDD.
7 GND power_in Ground 0 V return path for the device.
8 GND power_in Ground 0 V return path for the device.
9 IREF output Output current reference pin; a precision resistor (typ. 475 ohm) is connected from this pin to GND to set the output current.
10 NC unconnected No connect; do not connect.
11 NC unconnected No connect; do not connect.
12 VDD power_in Positive supply voltage pin, connected to +3.3 V supply.
13 GND power_in Ground 0 V return path for the device.
14 CLK# output Inverted HCSL (or LVDS with proper termination) clock output.
15 CLK output Noninverted HCSL (or LVDS with proper termination) clock output.
16 VDD power_in Positive supply voltage pin, connected to +3.3 V supply.

Key specifications

Parameter Value
Manufacturer onsemi
Package TSSOP-16
Category Clock and Timing
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output HIGH voltage VOH 660 700 850 mV See Figure 4 3
Output LOW voltage VOL -150 0 150 mV See Figure 4 3
Crossing voltage magnitude (absolute) Vcross 250 400 mV 3
Change in magnitude of Vcross Vcross 150 mV 3
Power supply current IDD 65 95 mA Note 4 3
Power supply current when OE is set low IDDOE 35 65 mA OE set low 3
Output clock frequency fCLKOUT 25 200 MHz 4
Output clock duty cycle tDUTY_CYCLE 45 50 55 % Measured at cross point 4
Output risetime tR 175 340 700 ps Measured from 175 mV to 525 mV, Figure 4 4
Output falltime tF 175 340 700 ps Measured from 525 mV to 175 mV, Figure 4 4
Output risetime variation (single-ended) 125 ps Single-ended 4
Output falltime variation (single-ended) 125 ps Single-ended 4
Cycle-to-cycle RMS jitter 2 5 ps fCLK = 200 MHz (Note 9) 4
Cycle-to-cycle peak to peak jitter 20 35 ps fCLK = 200 MHz (Note 9) 4
Period RMS jitter 1.5 3 ps fCLK = 200 MHz (Note 9) 4
Period peak-to-peak jitter 10 20 ps fCLK = 200 MHz (Note 9) 4
RMS phase jitter tjit() 0.25 0.5 ps at 125 MHz @ 1 MHz - 40 MHz 4
TIE RMS jitter tjitter (TIE) 2.5 ps fCLK = 200 MHz (Note 8) 4
OE output enable/disable time 1 s 4
Clock/crystal input frequency fCLKIN 25 MHz 4
RMS phase jitter PCIe Gen 1 tjphPCIeG1 10 16 86 ps (p−p) PCIe Gen 1 (Notes 12 and 13) 5
RMS phase jitter PCIe Gen 2 Lo Band tjphPCIeG2 0.2 0.25 3 ps (rms) PCIe Gen 2 Lo Band 10 kHz < f < 1.5 MHz (Note 12) 5
RMS phase jitter PCIe Gen 2 High Band tjphPCIeG2 0.9 1.2 3.1 ps (rms) PCIe Gen 2 High Band 1.5 MHz < f < Nyquist (50 MHz) (Note 12) 5
RMS phase jitter PCIe Gen 3 tjphPCIeG3 0.2 0.3 1 ps (rms) PCIe Gen 3 (PLL BW of 2−4 MHz, CDR = 10 MHz) (Note 12) 5
RMS phase jitter PCIe Gen 4 tjphPCIeG4 0.21 0.3 0.5 ps (rms) PCIe Gen 4 (PLL BW of 2−4 MHz, CDR = 10 MHz) (Note 12) 5
RMS phase jitter UPI tjphUPI 0.62 0.7 1 ps (rms) UPI (9.6 Gb/s, 10.4 Gb/s or 11.2 Gb/s, 100 MHz, 12 UI) 5
RMS phase jitter QPI & SMI tjphQPI_SMI 0.1 0.3 0.5 ps (rms) QPI & SMI (100.00 MHz or 133.33 MHz, 4.8 Gb/s, 6.4 Gb/s 12UI) (Note 14) 5
RMS phase jitter QPI & SMI tjphQPI_SMI 0.1 0.15 0.3 ps (rms) QPI & SMI (100.00 MHz, 8.0 Gb/s, 12UI) (Note 14) 5
RMS phase jitter QPI & SMI tjphQPI_SMI 0.07 0.1 0.2 ps (rms) QPI & SMI (100.00 MHz, 9.6 Gb/s, 12UI) (Note 14) 5
Positive power supply VDD 4.6 V GND = 0 V 3
Input voltage (VIN) VI -0.5 V GND = 0 V 3
Storage temperature range Tstg -65 150 °C 3
Wave solder temperature Tsol 265 °C Wave solder 3
Operating temperature range TA -40 85 °C 3
Positive power supply (operating range) VDD 3.3 V Operating range 3.3 V 1
Supply voltage tolerance VDD -5 5 % Operating range 3.3 V 1
Pull-up resistor OE, SEL0 and SEL1 RPU 100 k OE, SEL0 and SEL1 pull-up resistor 3
Thermal resistance junction-to-ambient, 0 lfpm JA 138 °C/W 0 lfpm, TSSOP-16 3
Thermal resistance junction-to-ambient, 500 lfpm JA 108 °C/W 500 lfpm, TSSOP-16 3
Thermal resistance junction-to-case JC 33 36 °C/W TSSOP-16 (Note 3) 3

CAD (KiCad official)

  • Symbol: NB3N3002DTG
  • Footprint: Package_SO:TSSOP-16_4.4x5mm_P0.65mm
  • 3D model: TSSOP-16 (KiCad packages3D, STEP)
  • 3D model files: nb3n3002dtg-etched.step / nb3n3002dtg-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); nb3n3002dtg.step / nb3n3002dtg.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (8 pp, sha256 727c2c8715113051, retrieved 2026-11-09, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF