component
LSM6DSV16BXTR
Public Made by Adomby adom
STMicroelectronics Accelerometers, LGA-14(2.5x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownLSM6DSV16BXTR
STMicroelectronics · Accelerometers · LGA-14(2.5x3)
LSM6DSV16BXTR from STMicroelectronics, in a LGA-14(2.5x3). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SDO/SA0 | output | SPI 4-wire serial data output (SDO) or I²C device address least significant bit selection (SA0). |
| 2 | TDMout | output | TDM audio data output in Mode 2; connect to GND or Vdd_IO when TDM interface is not used in Mode 1. |
| 3 | BCLK | input | TDM bit clock input in Mode 2; connect to GND or Vdd_IO when TDM interface is not used in Mode 1. |
| 4 | INT1 | output | Programmable interrupt output for sensor events; available in both I²C and SPI modes. |
| 5 | Vdd_IO | power_in | Power supply for I/O pins (1.08 to 3.6 V); recommend 100 nF filter capacitor. |
| 6 | AH1/QVAR1 | input | Analog hub input 1 or Qvar electrode 1 when enabled; connect to Vdd or GND if analog hub and Qvar are disabled. |
| 7 | GND | power_in | Ground supply (0 V). |
| 8 | Vdd | power_in | Core power supply (1.71 to 3.6 V); recommend 100 nF filter capacitor. |
| 9 | AH2/QVAR2 | input | Analog hub input 2 or Qvar electrode 2 when enabled; connect to Vdd or GND if analog hub and Qvar are disabled. |
| 10 | INT2 | output | Programmable interrupt 2 output for sensor events; available in both I²C and SPI modes. |
| 11 | WCLK | input | TDM word clock input in Mode 2; connect to Vdd_IO or leave unconnected when TDM interface is not used in Mode 1. |
| 12 | CS | input | Communication mode selection: high enables SPI idle mode or I²C/MIPI I3C communication; low enables active SPI mode. |
| 13 | SCL | bidirectional | I²C/MIPI I3C serial clock (open-drain in I²C) or SPI serial port clock input. |
| 14 | SDA | bidirectional | I²C/MIPI I3C serial data (open-drain bidirectional), SPI serial data input (SDI) in 4-wire mode, or serial data output (SDO) in 3-wire mode. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LGA-14(2.5x3) |
| Category | Sensors |
| Pins | 14 |
CAD (KiCad official)
- Symbol:
LSM6DSV16BXTR - Footprint:
Package_LGA:Bosch_LGA-14_3x2.5mm_P0.5mm - 3D model: LGA-14(2.5x3) (KiCad packages3D, STEP)
- 3D model files:
lsm6dsv16bxtr-etched.step/lsm6dsv16bxtr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lsm6dsv16bxtr.step/lsm6dsv16bxtr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (149 pp, sha256
b68ff3a7d830e1a7, retrieved 2026-09-21, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).