3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTM1730
TM(Shenzhen Titan Micro Elec) · LCD Drivers · SOP-28
TM1730 from TM(Shenzhen Titan Micro Elec), in a SOP-28. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | System ground connection for the device. |
| 2 | COM0 | output | LCD common driver output COM0 that must be left open if unused. |
| 3 | COM1 | output | LCD common driver output COM1 that must be left open if unused. |
| 4 | COM2 | output | LCD common driver output COM2 that must be left open if unused. |
| 5 | COM3 | output | LCD common driver output COM3 that must be left open if unused. |
| 6 | SEG19/COM4/K19/INT | bidirectional | Multiplexed pin that acts as LCD segment output and key input (pulled low internally during key scan) when M=0 and INT/ROW=0, as INT interrupt output when M=0 and INT/ROW=1 (active low if ACT=0, active high if ACT=1), and as LCD common output COM4 when M=1. |
| 7 | SEG18/COM5/K18 | bidirectional | Multiplexed pin that acts as LCD segment output and key input (pulled low internally during key input) when M=0, and as LCD common output COM5 when M=1. |
| 8 | SEG17/COM6/K17 | bidirectional | Multiplexed pin that acts as LCD segment output and key input (pulled low internally during key input) when M=0, and as LCD common output COM6 when M=1. |
| 9 | SEG16/COM7/K16 | bidirectional | Multiplexed pin that acts as LCD segment output and key input (pulled low internally during key input) when M=0, and as LCD common output COM7 when M=1. |
| 10 | SEG15/K15/INT | bidirectional | Multiplexed pin that acts as LCD segment output with key input (internal pull-down) when M=1 and INT/ROW=0, and as INT interrupt output when M=1 and INT/ROW=1, with polarity set by the ACT bit. |
| 11 | SEG0/K0 | bidirectional | LCD segment driver output SEG0 that doubles as key scan data input, pulled low internally during key input. |
| 12 | SEG1/K1 | bidirectional | LCD segment driver output SEG1 that doubles as key scan data input, pulled low internally during key input. |
| 13 | SEG2/K2 | bidirectional | LCD segment driver output SEG2 that doubles as key scan data input, pulled low internally during key input. |
| 14 | SEG3/K3 | bidirectional | LCD segment driver output SEG3 that doubles as key scan data input, pulled low internally during key input. |
| 15 | SEG4/K4 | bidirectional | LCD segment driver output SEG4 that doubles as key scan data input, pulled low internally during key input. |
| 16 | SEG5/K5 | bidirectional | LCD segment driver output SEG5 that doubles as key scan data input, pulled low internally during key input. |
| 17 | SEG6/K6 | bidirectional | LCD segment driver output SEG6 that doubles as key scan data input, pulled low internally during key input. |
| 18 | SEG7/K7 | bidirectional | LCD segment driver output SEG7 that doubles as key scan data input, pulled low internally during key input. |
| 19 | SEG8/K8 | bidirectional | LCD segment driver output SEG8 that doubles as key scan data input, pulled low internally during key input. |
| 20 | SEG9/K9 | bidirectional | LCD segment driver output SEG9 that doubles as key scan data input, pulled low internally during key input. |
| 21 | SEG10/K10 | bidirectional | LCD segment driver output SEG10 that doubles as key scan data input, pulled low internally during key input. |
| 22 | SEG11/K11 | bidirectional | LCD segment driver output SEG11 that doubles as key scan data input, pulled low internally during key input. |
| 23 | SEG12/K12 | bidirectional | LCD segment driver output SEG12 that doubles as key scan data input, pulled low internally during key input. |
| 24 | SEG13/K13 | bidirectional | LCD segment driver output SEG13 that doubles as key scan data input, pulled low internally during key input. |
| 25 | SEG14/K14 | bidirectional | LCD segment driver output SEG14 that doubles as key scan data input, pulled low internally during key input. |
| 26 | SCL | input | I2C serial clock input, with input low at 0 to 0.3VDD and input high at 0.7VDD to VDD, operating up to 400 kHz at VDD 3.0 to 5.5V. |
| 27 | SDA | bidirectional | I2C serial data input/output, with input low at 0 to 0.3VDD and input high at 0.7VDD to VDD. |
| 28 | VDD | power_in | Chip power supply input with an operating range of 2.4 to 5.5V and an absolute maximum of -0.3 to +6.5V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TM(Shenzhen Titan Micro Elec) |
| Package | SOP-28 |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Logic supply voltage | VDD | -0.3 | 6.5 | V | 3 | ||
| Input voltage SDA, SCL | Vin | -0.3 | V | 3 | |||
| ESD human body model (HBM) | ESD | 2000 | V | Human body model (HBM) | 3 | ||
| ESD machine model (MM) | ESD | 200 | V | Machine model (MM) | 3 | ||
| Operating temperature range | Topr | -40 | 85 | ℃ | 3 | ||
| Storage temperature range | Tstg | -55 | 150 | ℃ | 3 | ||
| Supply voltage | VDD | 2.5 | 5.5 | V | 3 | ||
| Operating temperature range | Ta | -20 | 85 | ℃ | 3 | ||
| Operating junction temperature range | Tj | -40 | 125 | ℃ | 3 | ||
| Operating voltage | VDD | 2.4 | 5.5 | V | 4 | ||
| Operating current, internal RC, LCD ON, no load | Idd1 | 155 | 310 | μA | VDD=3.0V, internal RC, no load (LCD ON) | 4 | |
| Operating current, internal RC, LCD ON, no load | Idd1 | 260 | 420 | μA | VDD=5.0V, internal RC, no load | 4 | |
| Operating current, external clock, LCD OFF, no load | Idd2 | 8 | 30 | μA | VDD=3.0V, external clock, no load (LCD OFF) | 4 | |
| Operating current, external clock, no load | Idd2 | 20 | 60 | μA | VDD=5.0V, external clock, no load | 4 | |
| Standby current, power-save mode, no load | Istb | 1 | 3 | μA | VDD=3.0V, power-save mode, no load | 4 | |
| Standby current, power-save mode, no load | Istb | 2 | 5 | μA | VDD=5.0V, power-save mode, no load | 4 | |
| Input low voltage SDA, SCL | Vil | 0 | V | 4 | |||
| Input leakage current | Iil | -1 | 1 | μA | VIN = VSS or VDD | 4 | |
| Low-level output current SDA | Ioh | 3 | mA | VDD=3.0V, V=0.4V, SDA | 4 | ||
| Low-level output current SDA | Ioh | 6 | mA | VDD=5.0V, SDA | 4 | ||
| COM sink current | Iol1 | 80 | 160 | μA | VDD=3.0V, Vol=0.3V | 4 | |
| COM sink current | Iol1 | 180 | 360 | μA | VDD=5.0V, Vol=0.5V | 4 | |
| COM source current | Ioh1 | -80 | -120 | μA | VDD=3.0V, Voh=2.7V | 4 | |
| COM source current | Ioh1 | -120 | -200 | μA | VDD=5.0V, Voh=4.5V | 4 | |
| SEG sink current | Iol2 | 60 | 120 | μA | VDD=3.0V, Vol=0.3V | 4 | |
| SEG sink current | Iol2 | 120 | 200 | μA | VDD=5.0V, Vol=0.5V | 4 | |
| SEG source current | Ioh2 | -40 | -70 | μA | VDD=3.0V, Voh=2.7V | 4 | |
| SEG source current | Ioh2 | -70 | -140 | μA | VDD=5.0V, Voh=4.5V | 4 | |
| INT sink current | Iol3 | 1 | mA | VDD=3.0V, Vol=0.3V | 4 | ||
| INT sink current | Iol3 | 2 | mA | VDD=5.0V, Vol=0.5V | 4 | ||
| INT source current | Ioh3 | -1 | mA | VDD=3.0V, Voh=2.7V | 4 | ||
| INT source current | Ioh3 | -2 | mA | VDD=5.0V, Voh=4.5V | 4 | ||
| Input pull-up resistance | Rpl | 220 | 400 | 600 | KΩ | VDD=3.0V, SEG0/K0~SEG19/K1, during keyscan | 4 |
| LCD drive scan frequency | fLCD | 58 | 72 | 90 | Hz | VDD=3.0V and VDD=5.0V; 204 display mode and 168 display mode | 4 |
| VDD off time | tOFF | 20 | ms | VDD drop down to 0V | 4 | ||
| VDD sleep rate | tSR | 0.05 | V/ms | 4 | |||
| SCL clock frequency | fSCL | 100 | kHZ | VDD=2.4V~5.5V column | 5 | ||
| Bus free time | tBUF | 4.7 | us | Bus must be free before a new transfer starts (VDD=2.4V~5.5V column) | 5 | ||
| START condition hold time | tHD;STA | 4 | us | First clock pulse generated after this period (VDD=2.4V~5.5V column) | 5 | ||
| SCL low pulse width | tLOW | 4.7 | us | VDD=2.4V~5.5V column | 5 | ||
| SCL high pulse width | tHIGH | 4 | us | VDD=2.4V~5.5V column | 5 | ||
| START condition setup time | tSU;STA | 4.7 | us | Valid repeated START condition (VDD=2.4V~5.5V column) | 5 | ||
| SDA hold time | tSDH | 0 | ns | VDD=2.4V~5.5V column | 5 | ||
| SDA setup time | tSDS | 250 | ns | VDD=2.4V~5.5V column | 5 | ||
| Input signal rise time | tr | 0.3 | us | VDD=2.4V~5.5V column | 5 | ||
| Input signal fall time | tf | 0.3 | us | VDD=2.4V~5.5V column | 5 | ||
| STOP condition setup time | tSU;STO | 4 | us | VDD=2.4V~5.5V column | 5 | ||
| Clock output valid time | tAA | 3.5 | μs | VDD=2.4V~5.5V column | 5 | ||
| Input filter time (SDA and SCL pins) | tSP | 100 | ns | Noise suppression time, VDD=2.4V~5.5V column | 5 |
CAD (KiCad official)
- Symbol:
TM1730 - Footprint:
Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm - 3D model: SOP-28 (KiCad packages3D, STEP)
- 3D model files:
tm1730-etched.step/tm1730-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tm1730.step/tm1730.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TM(Shenzhen Titan Micro Elec) datasheet, copy hosted by LCSC (19 pp, sha256
871dc1233799a179, retrieved 2026-11-17) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).