Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TM1730

TM(Shenzhen Titan Micro Elec) · LCD Drivers · SOP-28

TM1730 from TM(Shenzhen Titan Micro Elec), in a SOP-28. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in System ground connection for the device.
2 COM0 output LCD common driver output COM0 that must be left open if unused.
3 COM1 output LCD common driver output COM1 that must be left open if unused.
4 COM2 output LCD common driver output COM2 that must be left open if unused.
5 COM3 output LCD common driver output COM3 that must be left open if unused.
6 SEG19/COM4/K19/INT bidirectional Multiplexed pin that acts as LCD segment output and key input (pulled low internally during key scan) when M=0 and INT/ROW=0, as INT interrupt output when M=0 and INT/ROW=1 (active low if ACT=0, active high if ACT=1), and as LCD common output COM4 when M=1.
7 SEG18/COM5/K18 bidirectional Multiplexed pin that acts as LCD segment output and key input (pulled low internally during key input) when M=0, and as LCD common output COM5 when M=1.
8 SEG17/COM6/K17 bidirectional Multiplexed pin that acts as LCD segment output and key input (pulled low internally during key input) when M=0, and as LCD common output COM6 when M=1.
9 SEG16/COM7/K16 bidirectional Multiplexed pin that acts as LCD segment output and key input (pulled low internally during key input) when M=0, and as LCD common output COM7 when M=1.
10 SEG15/K15/INT bidirectional Multiplexed pin that acts as LCD segment output with key input (internal pull-down) when M=1 and INT/ROW=0, and as INT interrupt output when M=1 and INT/ROW=1, with polarity set by the ACT bit.
11 SEG0/K0 bidirectional LCD segment driver output SEG0 that doubles as key scan data input, pulled low internally during key input.
12 SEG1/K1 bidirectional LCD segment driver output SEG1 that doubles as key scan data input, pulled low internally during key input.
13 SEG2/K2 bidirectional LCD segment driver output SEG2 that doubles as key scan data input, pulled low internally during key input.
14 SEG3/K3 bidirectional LCD segment driver output SEG3 that doubles as key scan data input, pulled low internally during key input.
15 SEG4/K4 bidirectional LCD segment driver output SEG4 that doubles as key scan data input, pulled low internally during key input.
16 SEG5/K5 bidirectional LCD segment driver output SEG5 that doubles as key scan data input, pulled low internally during key input.
17 SEG6/K6 bidirectional LCD segment driver output SEG6 that doubles as key scan data input, pulled low internally during key input.
18 SEG7/K7 bidirectional LCD segment driver output SEG7 that doubles as key scan data input, pulled low internally during key input.
19 SEG8/K8 bidirectional LCD segment driver output SEG8 that doubles as key scan data input, pulled low internally during key input.
20 SEG9/K9 bidirectional LCD segment driver output SEG9 that doubles as key scan data input, pulled low internally during key input.
21 SEG10/K10 bidirectional LCD segment driver output SEG10 that doubles as key scan data input, pulled low internally during key input.
22 SEG11/K11 bidirectional LCD segment driver output SEG11 that doubles as key scan data input, pulled low internally during key input.
23 SEG12/K12 bidirectional LCD segment driver output SEG12 that doubles as key scan data input, pulled low internally during key input.
24 SEG13/K13 bidirectional LCD segment driver output SEG13 that doubles as key scan data input, pulled low internally during key input.
25 SEG14/K14 bidirectional LCD segment driver output SEG14 that doubles as key scan data input, pulled low internally during key input.
26 SCL input I2C serial clock input, with input low at 0 to 0.3VDD and input high at 0.7VDD to VDD, operating up to 400 kHz at VDD 3.0 to 5.5V.
27 SDA bidirectional I2C serial data input/output, with input low at 0 to 0.3VDD and input high at 0.7VDD to VDD.
28 VDD power_in Chip power supply input with an operating range of 2.4 to 5.5V and an absolute maximum of -0.3 to +6.5V.

Key specifications

Parameter Value
Manufacturer TM(Shenzhen Titan Micro Elec)
Package SOP-28
Category Nixie Tube Driver/LED Driver
Pins 28

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Logic supply voltage VDD -0.3 6.5 V 3
Input voltage SDA, SCL Vin -0.3 V 3
ESD human body model (HBM) ESD 2000 V Human body model (HBM) 3
ESD machine model (MM) ESD 200 V Machine model (MM) 3
Operating temperature range Topr -40 85 ℃ 3
Storage temperature range Tstg -55 150 ℃ 3
Supply voltage VDD 2.5 5.5 V 3
Operating temperature range Ta -20 85 ℃ 3
Operating junction temperature range Tj -40 125 ℃ 3
Operating voltage VDD 2.4 5.5 V 4
Operating current, internal RC, LCD ON, no load Idd1 155 310 μA VDD=3.0V, internal RC, no load (LCD ON) 4
Operating current, internal RC, LCD ON, no load Idd1 260 420 μA VDD=5.0V, internal RC, no load 4
Operating current, external clock, LCD OFF, no load Idd2 8 30 μA VDD=3.0V, external clock, no load (LCD OFF) 4
Operating current, external clock, no load Idd2 20 60 μA VDD=5.0V, external clock, no load 4
Standby current, power-save mode, no load Istb 1 3 μA VDD=3.0V, power-save mode, no load 4
Standby current, power-save mode, no load Istb 2 5 μA VDD=5.0V, power-save mode, no load 4
Input low voltage SDA, SCL Vil 0 V 4
Input leakage current Iil -1 1 μA VIN = VSS or VDD 4
Low-level output current SDA Ioh 3 mA VDD=3.0V, V=0.4V, SDA 4
Low-level output current SDA Ioh 6 mA VDD=5.0V, SDA 4
COM sink current Iol1 80 160 μA VDD=3.0V, Vol=0.3V 4
COM sink current Iol1 180 360 μA VDD=5.0V, Vol=0.5V 4
COM source current Ioh1 -80 -120 μA VDD=3.0V, Voh=2.7V 4
COM source current Ioh1 -120 -200 μA VDD=5.0V, Voh=4.5V 4
SEG sink current Iol2 60 120 μA VDD=3.0V, Vol=0.3V 4
SEG sink current Iol2 120 200 μA VDD=5.0V, Vol=0.5V 4
SEG source current Ioh2 -40 -70 μA VDD=3.0V, Voh=2.7V 4
SEG source current Ioh2 -70 -140 μA VDD=5.0V, Voh=4.5V 4
INT sink current Iol3 1 mA VDD=3.0V, Vol=0.3V 4
INT sink current Iol3 2 mA VDD=5.0V, Vol=0.5V 4
INT source current Ioh3 -1 mA VDD=3.0V, Voh=2.7V 4
INT source current Ioh3 -2 mA VDD=5.0V, Voh=4.5V 4
Input pull-up resistance Rpl 220 400 600 KΩ VDD=3.0V, SEG0/K0~SEG19/K1, during keyscan 4
LCD drive scan frequency fLCD 58 72 90 Hz VDD=3.0V and VDD=5.0V; 204 display mode and 168 display mode 4
VDD off time tOFF 20 ms VDD drop down to 0V 4
VDD sleep rate tSR 0.05 V/ms 4
SCL clock frequency fSCL 100 kHZ VDD=2.4V~5.5V column 5
Bus free time tBUF 4.7 us Bus must be free before a new transfer starts (VDD=2.4V~5.5V column) 5
START condition hold time tHD;STA 4 us First clock pulse generated after this period (VDD=2.4V~5.5V column) 5
SCL low pulse width tLOW 4.7 us VDD=2.4V~5.5V column 5
SCL high pulse width tHIGH 4 us VDD=2.4V~5.5V column 5
START condition setup time tSU;STA 4.7 us Valid repeated START condition (VDD=2.4V~5.5V column) 5
SDA hold time tSDH 0 ns VDD=2.4V~5.5V column 5
SDA setup time tSDS 250 ns VDD=2.4V~5.5V column 5
Input signal rise time tr 0.3 us VDD=2.4V~5.5V column 5
Input signal fall time tf 0.3 us VDD=2.4V~5.5V column 5
STOP condition setup time tSU;STO 4 us VDD=2.4V~5.5V column 5
Clock output valid time tAA 3.5 μs VDD=2.4V~5.5V column 5
Input filter time (SDA and SCL pins) tSP 100 ns Noise suppression time, VDD=2.4V~5.5V column 5

CAD (KiCad official)

  • Symbol: TM1730
  • Footprint: Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm
  • 3D model: SOP-28 (KiCad packages3D, STEP)
  • 3D model files: tm1730-etched.step / tm1730-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tm1730.step / tm1730.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: TM(Shenzhen Titan Micro Elec) datasheet, copy hosted by LCSC (19 pp, sha256 871dc1233799a179, retrieved 2026-11-17)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF