3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownTLV27L1IDBVR
Texas Instruments · Precision OpAmps · SOT-23-5
TLV27L1IDBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Amplifier output, which the datasheet describes as rail-to-rail; absolute maximum output current is 100 mA. |
| 2 | GND | power_in | Ground reference pin; the absolute maximum input voltage is specified relative to this pin. |
| 3 | IN+ | input | Non-inverting input; the input common-mode voltage range is −0.2 V to VS−1.2 V. |
| 4 | IN− | input | Inverting input; the same input common-mode voltage range of −0.2 V to VS−1.2 V applies. |
| 5 | VDD | power_in | Positive supply pin; single-supply operation is specified from 2.7 V to 16 V, with an absolute maximum supply voltage of 16.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Amplifiers |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VS | 16.5 | V | 2 | |||
| Output current | IO | 100 | mA | 2 | |||
| Maximum junction temperature | TJ | 150 | °C | 2 | |||
| Storage temperature range | Tstg | -65 | 125 | °C | 2 | ||
| Lead temperature | 300 | °C | 1.6 mm (1/16 inch) from case for 10 seconds | 2 | |||
| Supply voltage, dual supply | 1.35 | 8 | V | Dual supply (printed ±1.35 to ±8) | 2 | ||
| Supply voltage, single supply | VS | 2.7 | 16 | V | Single supply | 2 | |
| Input common-mode voltage range | VIC | -0.2 | V | Upper limit printed as VS−1.2 V | 2 | ||
| Operating free-air temperature, I-suffix | TA | -40 | 125 | °C | I-suffix | 2 | |
| Thermal resistance junction-to-ambient | θJA | 324.1 | °C/W | DBV (5) package | 2 | ||
| Thermal resistance junction-to-case | θJC | 55 | °C/W | DBV (5) package | 2 | ||
| Power rating | 385 | mW | DBV (5), TA ≤ 25°C | 2 | |||
| Power rating | 201 | mW | DBV (5), TA = 85°C | 2 | |||
| Input offset voltage | VIO | 0.5 | 5 | mV | VIC = VS/2, VO = VS/2, RL = 100 kΩ, RS = 50 Ω, 25°C | 3 | |
| Input offset voltage | VIO | 7 | mV | VIC = VS/2, VO = VS/2, RL = 100 kΩ, RS = 50 Ω, full range | 3 | ||
| Common-mode rejection ratio | CMRR | 71 | 86 | dB | VIC = 0 V to VS−1.2 V, 25°C | 3 | |
| Common-mode rejection ratio | CMRR | 70 | dB | VIC = 0 V to VS+1.2 V (as printed), RS = 50 Ω, full range | 3 | ||
| Large-signal differential voltage amplification | AVD | 80 | 100 | dB | VS = 2.7 V, 25°C, VO(PP) = VS/2 | 3 | |
| Large-signal differential voltage amplification | AVD | 77 | dB | VS = 2.7 V and 5 V, VO(PP) = VS/2, RL = 100 kΩ, full range | 3 | ||
| Large-signal differential voltage amplification | AVD | 77 | 82 | dB | VS = ±5 V, 25°C, VO(PP) = VS/2, RL = 100 kΩ | 3 | |
| Large-signal differential voltage amplification | AVD | 74 | dB | VS = ±5 V, full range, VO(PP) = VS/2, RL = 100 kΩ | 3 | ||
| Input offset current | IIO | 1 | 60 | pA | VIC = VS/2, VO = VS/2, TA ≤ 25°C | 3 | |
| Input offset current | IIO | 100 | pA | VIC = VS/2, VO = VS/2, TA ≤ 70°C | 3 | ||
| Input offset current | IIO | 1000 | pA | VIC = VS/2, VO = VS/2, TA ≤ 125°C | 3 | ||
| Input bias current | IIB | 1 | 60 | pA | VIC = VS/2, VO = VS/2, RL = 100 kΩ, RS = 50 Ω, TA ≤ 25°C | 3 | |
| Input bias current | IIB | 200 | pA | VIC = VS/2, VO = VS/2, RL = 100 kΩ, RS = 50 Ω, TA ≤ 70°C | 3 | ||
| Input bias current | IIB | 1000 | pA | VIC = VS/2, VO = VS/2, RL = 100 kΩ, RS = 50 Ω, TA ≤ 125°C | 3 | ||
| Quiescent current (per channel) | IQ | 7 | 11 | μA | VO = VS/2, 25°C | 3 | |
| Quiescent current (per channel) | IQ | 16 | μA | VO = VS/2, full range | 3 | ||
| Power supply rejection ratio | PSRR | 74 | 82 | dB | VS = 2.7 V to 16 V, no load, 25°C | 3 | |
| Power supply rejection ratio | PSRR | 70 | dB | VS = 2.7 V to 16 V, VIC = VS/2 V, no load, full range | 3 | ||
| Output voltage swing from rail | VO | 160 | 200 | mV | VS = 2.7 V, 25°C | 4 | |
| Output voltage swing from rail | VO | 220 | mV | VS = 2.7 V, full range | 4 | ||
| Output voltage swing from rail | VO | 85 | 120 | mV | VIC = VS/2, IOL = 100 μA, VS = 5 V, 25°C | 4 | |
| Output voltage swing from rail | VO | 200 | mV | VIC = VS/2, IOL = 100 μA, VS = 5 V, full range | 4 | ||
| Output voltage swing from rail | VO | 50 | 120 | mV | VS = ±5 V, 25°C | 4 | |
| Output voltage swing from rail | VO | 150 | mV | VS = ±5 V, full range | 4 | ||
| Output voltage swing from rail | VO | 420 | 800 | mV | VIC = VS/2, IOL = 500 μA, VS = 5 V, 25°C | 4 | |
| Output voltage swing from rail | VO | 900 | mV | VIC = VS/2, IOL = 500 μA, VS = 5 V, full range | 4 | ||
| Output voltage swing from rail | VO | 200 | 400 | mV | VIC = VS/2, IOL = 500 μA, VS = ±5 V, 25°C | 4 | |
| Output voltage swing from rail | VO | 500 | mV | VIC = VS/2, IOL = 500 μA, VS = ±5 V, full range | 4 | ||
| Output current | IO | 400 | μA | VO = 0.5 V from rail, VS = 2.7 V, 25°C (column unconfirmed) | 4 | ||
| Slew rate at unity gain | SR | 0.05 | V/μs | VO(pp) = 1 V, RL = 100 kΩ, CL = 50 pF, −40°C | 4 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
TLV27L1IDBVR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
tlv27l1idbvr-etched.step/tlv27l1idbvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv27l1idbvr.step/tlv27l1idbvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (26 pp, sha256
636f64cefb53d29f, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).