Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TLV27L1IDBVR

Texas Instruments · Precision OpAmps · SOT-23-5

TLV27L1IDBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 OUT output Amplifier output, which the datasheet describes as rail-to-rail; absolute maximum output current is 100 mA.
2 GND power_in Ground reference pin; the absolute maximum input voltage is specified relative to this pin.
3 IN+ input Non-inverting input; the input common-mode voltage range is −0.2 V to VS−1.2 V.
4 IN− input Inverting input; the same input common-mode voltage range of −0.2 V to VS−1.2 V applies.
5 VDD power_in Positive supply pin; single-supply operation is specified from 2.7 V to 16 V, with an absolute maximum supply voltage of 16.5 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Amplifiers
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VS 16.5 V 2
Output current IO 100 mA 2
Maximum junction temperature TJ 150 °C 2
Storage temperature range Tstg -65 125 °C 2
Lead temperature 300 °C 1.6 mm (1/16 inch) from case for 10 seconds 2
Supply voltage, dual supply 1.35 8 V Dual supply (printed ±1.35 to ±8) 2
Supply voltage, single supply VS 2.7 16 V Single supply 2
Input common-mode voltage range VIC -0.2 V Upper limit printed as VS−1.2 V 2
Operating free-air temperature, I-suffix TA -40 125 °C I-suffix 2
Thermal resistance junction-to-ambient θJA 324.1 °C/W DBV (5) package 2
Thermal resistance junction-to-case θJC 55 °C/W DBV (5) package 2
Power rating 385 mW DBV (5), TA ≤ 25°C 2
Power rating 201 mW DBV (5), TA = 85°C 2
Input offset voltage VIO 0.5 5 mV VIC = VS/2, VO = VS/2, RL = 100 kΩ, RS = 50 Ω, 25°C 3
Input offset voltage VIO 7 mV VIC = VS/2, VO = VS/2, RL = 100 kΩ, RS = 50 Ω, full range 3
Common-mode rejection ratio CMRR 71 86 dB VIC = 0 V to VS−1.2 V, 25°C 3
Common-mode rejection ratio CMRR 70 dB VIC = 0 V to VS+1.2 V (as printed), RS = 50 Ω, full range 3
Large-signal differential voltage amplification AVD 80 100 dB VS = 2.7 V, 25°C, VO(PP) = VS/2 3
Large-signal differential voltage amplification AVD 77 dB VS = 2.7 V and 5 V, VO(PP) = VS/2, RL = 100 kΩ, full range 3
Large-signal differential voltage amplification AVD 77 82 dB VS = ±5 V, 25°C, VO(PP) = VS/2, RL = 100 kΩ 3
Large-signal differential voltage amplification AVD 74 dB VS = ±5 V, full range, VO(PP) = VS/2, RL = 100 kΩ 3
Input offset current IIO 1 60 pA VIC = VS/2, VO = VS/2, TA ≤ 25°C 3
Input offset current IIO 100 pA VIC = VS/2, VO = VS/2, TA ≤ 70°C 3
Input offset current IIO 1000 pA VIC = VS/2, VO = VS/2, TA ≤ 125°C 3
Input bias current IIB 1 60 pA VIC = VS/2, VO = VS/2, RL = 100 kΩ, RS = 50 Ω, TA ≤ 25°C 3
Input bias current IIB 200 pA VIC = VS/2, VO = VS/2, RL = 100 kΩ, RS = 50 Ω, TA ≤ 70°C 3
Input bias current IIB 1000 pA VIC = VS/2, VO = VS/2, RL = 100 kΩ, RS = 50 Ω, TA ≤ 125°C 3
Quiescent current (per channel) IQ 7 11 μA VO = VS/2, 25°C 3
Quiescent current (per channel) IQ 16 μA VO = VS/2, full range 3
Power supply rejection ratio PSRR 74 82 dB VS = 2.7 V to 16 V, no load, 25°C 3
Power supply rejection ratio PSRR 70 dB VS = 2.7 V to 16 V, VIC = VS/2 V, no load, full range 3
Output voltage swing from rail VO 160 200 mV VS = 2.7 V, 25°C 4
Output voltage swing from rail VO 220 mV VS = 2.7 V, full range 4
Output voltage swing from rail VO 85 120 mV VIC = VS/2, IOL = 100 μA, VS = 5 V, 25°C 4
Output voltage swing from rail VO 200 mV VIC = VS/2, IOL = 100 μA, VS = 5 V, full range 4
Output voltage swing from rail VO 50 120 mV VS = ±5 V, 25°C 4
Output voltage swing from rail VO 150 mV VS = ±5 V, full range 4
Output voltage swing from rail VO 420 800 mV VIC = VS/2, IOL = 500 μA, VS = 5 V, 25°C 4
Output voltage swing from rail VO 900 mV VIC = VS/2, IOL = 500 μA, VS = 5 V, full range 4
Output voltage swing from rail VO 200 400 mV VIC = VS/2, IOL = 500 μA, VS = ±5 V, 25°C 4
Output voltage swing from rail VO 500 mV VIC = VS/2, IOL = 500 μA, VS = ±5 V, full range 4
Output current IO 400 μA VO = 0.5 V from rail, VS = 2.7 V, 25°C (column unconfirmed) 4
Slew rate at unity gain SR 0.05 V/μs VO(pp) = 1 V, RL = 100 kΩ, CL = 50 pF, −40°C 4

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: TLV27L1IDBVR
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: tlv27l1idbvr-etched.step / tlv27l1idbvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlv27l1idbvr.step / tlv27l1idbvr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (26 pp, sha256 636f64cefb53d29f, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF