Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LM73C0QDDCRQ1

Texas Instruments · Temperature Sensors · SOT-23-Thin-6

LM73C0QDDCRQ1 from Texas Instruments, in a SOT-23-Thin-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 ADDR input Address select input (three-level logic); one of three device addresses is selected by connecting the pin to ground, leaving it floating, or connecting it to VDD.
2 GND power_in Ground reference for the device.
3 VDD power_in Power supply input; the datasheet specifies a supply range of 2.7 V to 5.5 V applied between VDD and GND.
4 SMBCLK input SMBus serial clock input, operating up to 400 kHz and low-pass filtered.
5 ALERT output Open-drain digital output that goes active whenever the measured temperature exceeds a programmable temperature limit.
6 SMBDAT bidirectional Open-drain SMBus bidirectional serial data line, synchronous to SMBCLK and low-pass filtered.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-Thin-6
Category Sensors
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage -0.3 6 V 4
Voltage at SMBCLK and SMBDAT pins -0.3 6 V 4
Voltage at All Other Pins -0.3 6 V Printed upper limit (VDD + 0.5) V and 6 V; 6 V stored 4
Input Current at Any Pin -5 5 mA 4
Storage Temperature Tstg -65 150 °C 4
Operating free-air temperature range (LM73-Q1) -40 125 °C 4
Supply Voltage Range VDD 2.7 5.5 V 4
Local temperature accuracy, VDD = 3.3V -1.85 1.85 °C VDD = 3.3V; TA = −40°C to -25°C 5
Local temperature accuracy, VDD = 3.3V -1.65 1.65 °C VDD = 3.3V; TA = −25°C to -10°C 5
Local temperature accuracy, VDD = 3.3V -1.45 1.45 °C VDD = 3.3V; TA = −10°C to 80°C 5
Local temperature accuracy, VDD = 3.3V -1.8 1.8 °C VDD = 3.3V; TA = 115°C to 125°C 5
Local temperature accuracy, VDD = 2.7V to 4.5V -2.1 2.1 °C VDD = 2.7V to 4.5V; TA = −40°C to -25°C 5
Local temperature accuracy, VDD = 2.7V to 4.5V -1.75 1.75 °C VDD = 2.7V to 4.5V; TA = −25°C to -10°C 5
Local temperature accuracy, VDD = 2.7V to 4.5V -1.65 1.65 °C VDD = 2.7V to 4.5V; TA = −10°C to 80°C 5
Local temperature accuracy, VDD = 2.7V to 4.5V -1.8 1.8 °C VDD = 2.7V to 4.5V; TA = 80°C to 115°C 5
Local temperature accuracy, VDD = 2.7V to 4.5V -2 2 °C VDD = 2.7V to 4.5V; TA = 115°C to 125°C 5
Local temperature accuracy, VDD > 4.5V to 5.5V -2.4 2.4 °C VDD > 4.5V to 5.5V; TA = −40°C to -25°C 5
Local temperature accuracy, VDD > 4.5V to 5.5V -2.2 2.2 °C VDD > 4.5V to 5.5V; TA = −25°C to -10°C 5
Local temperature accuracy, VDD > 4.5V to 5.5V -1.9 1.9 °C VDD > 4.5V to 5.5V; TA = −10°C to 80°C 5
Local temperature accuracy, VDD > 4.5V to 5.5V -1.8 1.8 °C VDD > 4.5V to 5.5V; TA = 80°C to 115°C 5
Local temperature accuracy, VDD > 4.5V to 5.5V -2 2 °C VDD > 4.5V to 5.5V; TA = 115°C to 125°C 5
Temperature conversion time, 11-bit 10.1 14 ms RES1 Bit = 0, RES0 Bit = 0; max at TA = TJ = TMIN to TMAX 5
Temperature conversion time, 12-bit 20.2 28 ms RES1 Bit = 0, RES0 Bit = 1; max at TA = TJ = TMIN to TMAX 5
Temperature conversion time, 13-bit 40.4 56 ms RES1 Bit = 1, RES0 Bit = 0; max at TA = TJ = TMIN to TMAX 5
Temperature conversion time, 14-bit 80.8 112 ms RES1 Bit = 1, RES0 Bit = 1; max at TA = TJ = TMIN to TMAX 5
Quiescent current, continuous conversion 320 495 µA Continuous Conversion Mode, SMBus inactive; max at TA = TJ = TMIN to TMAX 5
Quiescent current, shutdown, bus-idle timers on 120 175 µA Shutdown, bus-idle timers on; max at TA = TJ = TMIN to TMAX 5
Quiescent current, shutdown, bus-idle timers off 1.9 8 µA Shutdown, bus-idle timers off; max at TA = TJ = TMIN to TMAX 5
Logical 1 input voltage (SMBDAT, SMBCLK) VIH 0.7 × VDD Printed as 0.7 × VDD; TA = TJ = TMIN to TMAX 6
Logical 0 input voltage (SMBDAT, SMBCLK) VIL 0.3 × VDD Printed as 0.3 × VDD; TA = TJ = TMIN to TMAX 6
Logical 1 input current (SMBDAT, SMBCLK) IIH 0.01 2 µA VIN = VDD; max at TA = TJ = TMIN to TMAX 6
Logical 0 input current (SMBDAT, SMBCLK) IIL -2 -0.01 µA VIN = 0 V; min at TA = TJ = TMIN to TMAX 6
High level output current (SMBDAT, ALERT) IOH 0.01 2 µA VOH = VDD; max at TA = TJ = TMIN to TMAX 6
SMBus low level output voltage (SMBDAT, ALERT) VOL 0.4 V IOL = 3 mA; TA = TJ = TMIN to TMAX 6
Address pin high input voltage VIH;ADDRESS -0.1 V rel. VDD Printed as VDD, 0.100 V; TA = TJ = TMIN to TMAX 6
Address pin low input voltage VIL;ADDRESS 0.1 V TA = TJ = TMIN to TMAX 6
Address pin high input current IIH;ADDRESS 0.01 2 µA VIN = VDD; max at TA = TJ = TMIN to TMAX 6
Address pin low input current IIL;ADDRESS -2 -0.01 µA VIN = 0 V; min at TA = TJ = TMIN to TMAX 6
SMBus clock frequency fSMB 400 kHz TA = TJ = TMIN to TMAX; no minimum if Time-Out feature disabled 7
SMBus clock low time tLOW 300 ns TA = TJ = TMIN to TMAX 7
SMBus clock high time tHIGH 300 ns TA = TJ = TMIN to TMAX 7
Output fall time tF;SMBO 250 ns CL = 400 pF; IPULL-UP ≤ 3 mA; TA = TJ = TMIN to TMAX 7
SMBDAT and SMBCLK time low for reset of serial interface tTIMEOUT 15 45 ms TA = TJ = TMIN to TMAX 7
Data in setup time to SMBCLK high tSU;DAT 100 ns TA = TJ = TMIN to TMAX 7
Data in hold time after SMBCLK low tHD;DATI 0 ns TA = TJ = TMIN to TMAX 7
Data out hold time after SMBCLK low tHD;DATO 30 ns TA = TJ = TMIN to TMAX 7
Start condition hold time (SMBDAT low to SMBCLK low) tHD;STA 60 ns TA = TJ = TMIN to TMAX 7
Stop condition setup time tSU;STO 50 ns TA = TJ = TMIN to TMAX 7
Repeated start condition setup time tSU;STA 50 ns TA = TJ = TMIN to TMAX 7
SMBus free time between stop and start tBUF 1.2 µs TA = TJ = TMIN to TMAX 7
Power-on reset time tPOR 1 ms TA = TJ = TMIN to TMAX 7
Power-on reset threshold (VDD falling edge) 0.9 V Measured on VDD input, falling edge; TA = TJ = TMIN to TMAX 5
SMBDAT and SMBCLK digital input hysteresis VIN;HYST 0.07 × VDD 6
Input capacitance CIN 5 pF 6
Junction-to-ambient thermal resistance RθJA 117 °C/W 4
Junction-to-case (top) thermal resistance RθJC(top) 55 °C/W 4
Junction-to-board thermal resistance RθJA 25 °C/W Symbol as printed in datasheet table 4
Junction-to-top characterization parameter ψJT 1 °C/W 4
Junction-to-board characterization parameter ψJB 21 °C/W 4

CAD (KiCad official)

  • Symbol: LM73C0QDDCRQ1
  • Footprint: Package_TO_SOT_SMD:TSOT-23-6
  • 3D model: SOT-23-Thin-6 (KiCad packages3D, STEP)
  • 3D model files: lm73c0qddcrq1-etched.step / lm73c0qddcrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm73c0qddcrq1.step / lm73c0qddcrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (29 pp, sha256 d0f15ef700dd0477, retrieved 2026-11-10, tier: manufacturer)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF