Generated by kicad-footprint-generator · KiCad file format 20260206
LM73C0QDDCRQ1
Texas Instruments · Temperature Sensors · SOT-23-Thin-6
LM73C0QDDCRQ1 from Texas Instruments, in a SOT-23-Thin-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ADDR | input | Address select input (three-level logic); one of three device addresses is selected by connecting the pin to ground, leaving it floating, or connecting it to VDD. |
| 2 | GND | power_in | Ground reference for the device. |
| 3 | VDD | power_in | Power supply input; the datasheet specifies a supply range of 2.7 V to 5.5 V applied between VDD and GND. |
| 4 | SMBCLK | input | SMBus serial clock input, operating up to 400 kHz and low-pass filtered. |
| 5 | ALERT | output | Open-drain digital output that goes active whenever the measured temperature exceeds a programmable temperature limit. |
| 6 | SMBDAT | bidirectional | Open-drain SMBus bidirectional serial data line, synchronous to SMBCLK and low-pass filtered. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-Thin-6 |
| Category | Sensors |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | -0.3 | 6 | V | 4 | |||
| Voltage at SMBCLK and SMBDAT pins | -0.3 | 6 | V | 4 | |||
| Voltage at All Other Pins | -0.3 | 6 | V | Printed upper limit (VDD + 0.5) V and 6 V; 6 V stored | 4 | ||
| Input Current at Any Pin | -5 | 5 | mA | 4 | |||
| Storage Temperature | Tstg | -65 | 150 | °C | 4 | ||
| Operating free-air temperature range (LM73-Q1) | -40 | 125 | °C | 4 | |||
| Supply Voltage Range | VDD | 2.7 | 5.5 | V | 4 | ||
| Local temperature accuracy, VDD = 3.3V | -1.85 | 1.85 | °C | VDD = 3.3V; TA = −40°C to -25°C | 5 | ||
| Local temperature accuracy, VDD = 3.3V | -1.65 | 1.65 | °C | VDD = 3.3V; TA = −25°C to -10°C | 5 | ||
| Local temperature accuracy, VDD = 3.3V | -1.45 | 1.45 | °C | VDD = 3.3V; TA = −10°C to 80°C | 5 | ||
| Local temperature accuracy, VDD = 3.3V | -1.8 | 1.8 | °C | VDD = 3.3V; TA = 115°C to 125°C | 5 | ||
| Local temperature accuracy, VDD = 2.7V to 4.5V | -2.1 | 2.1 | °C | VDD = 2.7V to 4.5V; TA = −40°C to -25°C | 5 | ||
| Local temperature accuracy, VDD = 2.7V to 4.5V | -1.75 | 1.75 | °C | VDD = 2.7V to 4.5V; TA = −25°C to -10°C | 5 | ||
| Local temperature accuracy, VDD = 2.7V to 4.5V | -1.65 | 1.65 | °C | VDD = 2.7V to 4.5V; TA = −10°C to 80°C | 5 | ||
| Local temperature accuracy, VDD = 2.7V to 4.5V | -1.8 | 1.8 | °C | VDD = 2.7V to 4.5V; TA = 80°C to 115°C | 5 | ||
| Local temperature accuracy, VDD = 2.7V to 4.5V | -2 | 2 | °C | VDD = 2.7V to 4.5V; TA = 115°C to 125°C | 5 | ||
| Local temperature accuracy, VDD > 4.5V to 5.5V | -2.4 | 2.4 | °C | VDD > 4.5V to 5.5V; TA = −40°C to -25°C | 5 | ||
| Local temperature accuracy, VDD > 4.5V to 5.5V | -2.2 | 2.2 | °C | VDD > 4.5V to 5.5V; TA = −25°C to -10°C | 5 | ||
| Local temperature accuracy, VDD > 4.5V to 5.5V | -1.9 | 1.9 | °C | VDD > 4.5V to 5.5V; TA = −10°C to 80°C | 5 | ||
| Local temperature accuracy, VDD > 4.5V to 5.5V | -1.8 | 1.8 | °C | VDD > 4.5V to 5.5V; TA = 80°C to 115°C | 5 | ||
| Local temperature accuracy, VDD > 4.5V to 5.5V | -2 | 2 | °C | VDD > 4.5V to 5.5V; TA = 115°C to 125°C | 5 | ||
| Temperature conversion time, 11-bit | 10.1 | 14 | ms | RES1 Bit = 0, RES0 Bit = 0; max at TA = TJ = TMIN to TMAX | 5 | ||
| Temperature conversion time, 12-bit | 20.2 | 28 | ms | RES1 Bit = 0, RES0 Bit = 1; max at TA = TJ = TMIN to TMAX | 5 | ||
| Temperature conversion time, 13-bit | 40.4 | 56 | ms | RES1 Bit = 1, RES0 Bit = 0; max at TA = TJ = TMIN to TMAX | 5 | ||
| Temperature conversion time, 14-bit | 80.8 | 112 | ms | RES1 Bit = 1, RES0 Bit = 1; max at TA = TJ = TMIN to TMAX | 5 | ||
| Quiescent current, continuous conversion | 320 | 495 | µA | Continuous Conversion Mode, SMBus inactive; max at TA = TJ = TMIN to TMAX | 5 | ||
| Quiescent current, shutdown, bus-idle timers on | 120 | 175 | µA | Shutdown, bus-idle timers on; max at TA = TJ = TMIN to TMAX | 5 | ||
| Quiescent current, shutdown, bus-idle timers off | 1.9 | 8 | µA | Shutdown, bus-idle timers off; max at TA = TJ = TMIN to TMAX | 5 | ||
| Logical 1 input voltage (SMBDAT, SMBCLK) | VIH | 0.7 | × VDD | Printed as 0.7 × VDD; TA = TJ = TMIN to TMAX | 6 | ||
| Logical 0 input voltage (SMBDAT, SMBCLK) | VIL | 0.3 | × VDD | Printed as 0.3 × VDD; TA = TJ = TMIN to TMAX | 6 | ||
| Logical 1 input current (SMBDAT, SMBCLK) | IIH | 0.01 | 2 | µA | VIN = VDD; max at TA = TJ = TMIN to TMAX | 6 | |
| Logical 0 input current (SMBDAT, SMBCLK) | IIL | -2 | -0.01 | µA | VIN = 0 V; min at TA = TJ = TMIN to TMAX | 6 | |
| High level output current (SMBDAT, ALERT) | IOH | 0.01 | 2 | µA | VOH = VDD; max at TA = TJ = TMIN to TMAX | 6 | |
| SMBus low level output voltage (SMBDAT, ALERT) | VOL | 0.4 | V | IOL = 3 mA; TA = TJ = TMIN to TMAX | 6 | ||
| Address pin high input voltage | VIH;ADDRESS | -0.1 | V rel. VDD | Printed as VDD, 0.100 V; TA = TJ = TMIN to TMAX | 6 | ||
| Address pin low input voltage | VIL;ADDRESS | 0.1 | V | TA = TJ = TMIN to TMAX | 6 | ||
| Address pin high input current | IIH;ADDRESS | 0.01 | 2 | µA | VIN = VDD; max at TA = TJ = TMIN to TMAX | 6 | |
| Address pin low input current | IIL;ADDRESS | -2 | -0.01 | µA | VIN = 0 V; min at TA = TJ = TMIN to TMAX | 6 | |
| SMBus clock frequency | fSMB | 400 | kHz | TA = TJ = TMIN to TMAX; no minimum if Time-Out feature disabled | 7 | ||
| SMBus clock low time | tLOW | 300 | ns | TA = TJ = TMIN to TMAX | 7 | ||
| SMBus clock high time | tHIGH | 300 | ns | TA = TJ = TMIN to TMAX | 7 | ||
| Output fall time | tF;SMBO | 250 | ns | CL = 400 pF; IPULL-UP ≤ 3 mA; TA = TJ = TMIN to TMAX | 7 | ||
| SMBDAT and SMBCLK time low for reset of serial interface | tTIMEOUT | 15 | 45 | ms | TA = TJ = TMIN to TMAX | 7 | |
| Data in setup time to SMBCLK high | tSU;DAT | 100 | ns | TA = TJ = TMIN to TMAX | 7 | ||
| Data in hold time after SMBCLK low | tHD;DATI | 0 | ns | TA = TJ = TMIN to TMAX | 7 | ||
| Data out hold time after SMBCLK low | tHD;DATO | 30 | ns | TA = TJ = TMIN to TMAX | 7 | ||
| Start condition hold time (SMBDAT low to SMBCLK low) | tHD;STA | 60 | ns | TA = TJ = TMIN to TMAX | 7 | ||
| Stop condition setup time | tSU;STO | 50 | ns | TA = TJ = TMIN to TMAX | 7 | ||
| Repeated start condition setup time | tSU;STA | 50 | ns | TA = TJ = TMIN to TMAX | 7 | ||
| SMBus free time between stop and start | tBUF | 1.2 | µs | TA = TJ = TMIN to TMAX | 7 | ||
| Power-on reset time | tPOR | 1 | ms | TA = TJ = TMIN to TMAX | 7 | ||
| Power-on reset threshold (VDD falling edge) | 0.9 | V | Measured on VDD input, falling edge; TA = TJ = TMIN to TMAX | 5 | |||
| SMBDAT and SMBCLK digital input hysteresis | VIN;HYST | 0.07 | × VDD | 6 | |||
| Input capacitance | CIN | 5 | pF | 6 | |||
| Junction-to-ambient thermal resistance | RθJA | 117 | °C/W | 4 | |||
| Junction-to-case (top) thermal resistance | RθJC(top) | 55 | °C/W | 4 | |||
| Junction-to-board thermal resistance | RθJA | 25 | °C/W | Symbol as printed in datasheet table | 4 | ||
| Junction-to-top characterization parameter | ψJT | 1 | °C/W | 4 | |||
| Junction-to-board characterization parameter | ψJB | 21 | °C/W | 4 |
CAD (KiCad official)
- Symbol:
LM73C0QDDCRQ1 - Footprint:
Package_TO_SOT_SMD:TSOT-23-6 - 3D model: SOT-23-Thin-6 (KiCad packages3D, STEP)
- 3D model files:
lm73c0qddcrq1-etched.step/lm73c0qddcrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm73c0qddcrq1.step/lm73c0qddcrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (29 pp, sha256
d0f15ef700dd0477, retrieved 2026-11-10, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).