3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTLV320AIC24IPFB
Texas Instruments · Audio Interface ICs · TQFP-48(7x7)
TLV320AIC24IPFB from Texas Instruments, in a TQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | HDSI- | input | Headset input (negative), which can be treated similarly to the line-input pins. |
| 2 | HDSI+ | input | Headset input (positive), which can be treated similarly to the line-input pins. |
| 3 | HDSO- | output | Headset 150-Ω output (negative). |
| 4 | HDSO+ | output | Headset 150-Ω output (positive). |
| 5 | AVDD2 | power_in | Analog power supply, specified at 2.7 V to 3.6 V (AVDD). |
| 6 | AVSS2 | power_in | Analog ground. |
| 7 | TESTP | input | Test pin, which should be connected to digital ground. |
| 8 | NC | unconnected | Not connected. |
| 9 | PWRDN | input | Power-down input. |
| 10 | SDA | bidirectional | I2C/S2C host port data line. |
| 11 | SCL | input | I2C/S2C host port clock input. |
| 12 | IOVDD | power_in | Digital I/O power supply, specified at 1.1 V to 3.6 V. |
| 13 | IOVSS | power_in | Digital I/O ground. |
| 14 | FSD | output | Delayed frame sync output. |
| 15 | DVDD | power_in | Digital core supply, 1.8 V nominal (1.65 V to 1.95 V recommended). |
| 16 | DVSS | power_in | Digital ground. |
| 17 | DOUT | output | Serial data output. |
| 18 | DIN | input | Serial data input. |
| 19 | FS | bidirectional | Frame sync, bidirectional I/O. |
| 20 | SCLK | bidirectional | Serial bit clock, bidirectional I/O. |
| 21 | M/S | input | Master/slave select, applied to CODEC1 only; CODEC2 is always a slave. |
| 22 | MCLK | input | Master clock input, up to 100 MHz. |
| 23 | RESET | input | Device reset input. |
| 24 | VSS | power_in | Device ground, typically connected to analog ground. |
| 25 | DRVSS1 | power_in | Driver ground. |
| 26 | SPKO+ | output | 8-Ω speaker output (positive). |
| 27 | DRVDD | power_in | Analog output driver supply, specified at 2.7 V to 3.6 V and to be kept at the same voltage as AVDD. |
| 28 | SPKO- | output | 8-Ω speaker output (negative). |
| 29 | DRVSS2 | power_in | Driver ground. |
| 30 | CIDI- | input | Caller-ID input (negative), which can be treated similarly to the line-input pins. |
| 31 | CIDI+ | input | Caller-ID input (positive), which can be treated similarly to the line-input pins. |
| 32 | AVSS1 | power_in | Analog ground. |
| 33 | AVDD1 | power_in | Analog supply, specified at 2.7 V to 3.6 V. |
| 34 | MICI- | input | Microphone input (negative). |
| 35 | MICI+ | input | Microphone input (positive). |
| 36 | MICBIAS | input | Microphone bias. |
| 37 | LCDAC | output | 6-bit DAC output that may be used to drive an LCD. |
| 38 | HNSO- | output | Handset 150-Ω output (negative). |
| 39 | HNSO+ | output | Handset 150-Ω output (positive). |
| 40 | HNSI- | input | Handset input (negative), which can be treated similarly to the line-input pins. |
| 41 | HNSI+ | input | Handset input (positive), which can be treated similarly to the line-input pins. |
| 42 | AVDD | power_in | Analog supply, specified at 2.7 V to 3.6 V. |
| 43 | AVSS | power_in | Analog ground. |
| 44 | LINEI+ | input | Line input (positive). |
| 45 | LINEI- | input | Line input (negative). |
| 46 | LINEO- | output | Line 600-Ω output (negative). |
| 47 | LINEO+ | output | Line 600-Ω output (positive). |
| 48 | NC | unconnected | Not connected. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TQFP-48(7x7) |
| Category | Interface |
| Pins | 48 |
CAD (KiCad official)
- Symbol:
TLV320AIC24IPFB - Footprint:
Package_QFP:TQFP-48_7x7mm_P0.5mm - 3D model: TQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files:
tlv320aic24ipfb-etched.step/tlv320aic24ipfb-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv320aic24ipfb.step/tlv320aic24ipfb.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (59 pp, sha256
7a5a9cd5d93147bf, retrieved 2026-10-12, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).