Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TLV320AIC24IPFB

Texas Instruments · Audio Interface ICs · TQFP-48(7x7)

TLV320AIC24IPFB from Texas Instruments, in a TQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 HDSI- input Headset input (negative), which can be treated similarly to the line-input pins.
2 HDSI+ input Headset input (positive), which can be treated similarly to the line-input pins.
3 HDSO- output Headset 150-Ω output (negative).
4 HDSO+ output Headset 150-Ω output (positive).
5 AVDD2 power_in Analog power supply, specified at 2.7 V to 3.6 V (AVDD).
6 AVSS2 power_in Analog ground.
7 TESTP input Test pin, which should be connected to digital ground.
8 NC unconnected Not connected.
9 PWRDN input Power-down input.
10 SDA bidirectional I2C/S2C host port data line.
11 SCL input I2C/S2C host port clock input.
12 IOVDD power_in Digital I/O power supply, specified at 1.1 V to 3.6 V.
13 IOVSS power_in Digital I/O ground.
14 FSD output Delayed frame sync output.
15 DVDD power_in Digital core supply, 1.8 V nominal (1.65 V to 1.95 V recommended).
16 DVSS power_in Digital ground.
17 DOUT output Serial data output.
18 DIN input Serial data input.
19 FS bidirectional Frame sync, bidirectional I/O.
20 SCLK bidirectional Serial bit clock, bidirectional I/O.
21 M/S input Master/slave select, applied to CODEC1 only; CODEC2 is always a slave.
22 MCLK input Master clock input, up to 100 MHz.
23 RESET input Device reset input.
24 VSS power_in Device ground, typically connected to analog ground.
25 DRVSS1 power_in Driver ground.
26 SPKO+ output 8-Ω speaker output (positive).
27 DRVDD power_in Analog output driver supply, specified at 2.7 V to 3.6 V and to be kept at the same voltage as AVDD.
28 SPKO- output 8-Ω speaker output (negative).
29 DRVSS2 power_in Driver ground.
30 CIDI- input Caller-ID input (negative), which can be treated similarly to the line-input pins.
31 CIDI+ input Caller-ID input (positive), which can be treated similarly to the line-input pins.
32 AVSS1 power_in Analog ground.
33 AVDD1 power_in Analog supply, specified at 2.7 V to 3.6 V.
34 MICI- input Microphone input (negative).
35 MICI+ input Microphone input (positive).
36 MICBIAS input Microphone bias.
37 LCDAC output 6-bit DAC output that may be used to drive an LCD.
38 HNSO- output Handset 150-Ω output (negative).
39 HNSO+ output Handset 150-Ω output (positive).
40 HNSI- input Handset input (negative), which can be treated similarly to the line-input pins.
41 HNSI+ input Handset input (positive), which can be treated similarly to the line-input pins.
42 AVDD power_in Analog supply, specified at 2.7 V to 3.6 V.
43 AVSS power_in Analog ground.
44 LINEI+ input Line input (positive).
45 LINEI- input Line input (negative).
46 LINEO- output Line 600-Ω output (negative).
47 LINEO+ output Line 600-Ω output (positive).
48 NC unconnected Not connected.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TQFP-48(7x7)
Category Interface
Pins 48

CAD (KiCad official)

  • Symbol: TLV320AIC24IPFB
  • Footprint: Package_QFP:TQFP-48_7x7mm_P0.5mm
  • 3D model: TQFP-48(7x7) (KiCad packages3D, STEP)
  • 3D model files: tlv320aic24ipfb-etched.step / tlv320aic24ipfb-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlv320aic24ipfb.step / tlv320aic24ipfb.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (59 pp, sha256 7a5a9cd5d93147bf, retrieved 2026-10-12, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF