Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MC79L05ABPRAG

onsemi · Linear Voltage Regulators (LDO) · TO-92-2.54mm

MC79L05ABPRAG from onsemi, in a TO-92-2.54mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Ground pin, and a common ground is required between the input and the output voltages.
2 Input power_in Unregulated negative input (-Vin), which must remain typically 2.0 V above the output voltage even at the low point of the ripple, with an absolute input voltage rating of -30 V for the -5 V devices.
3 Output power_out Regulated negative output of -5.0 V nominal (-4.8 V to -5.2 V at TJ = +25 C), with a bypass capacitor CO of 0.1 uF recommended to improve stability and transient response.

Key specifications

Parameter Value
Manufacturer onsemi
Package TO-92-2.54mm
Category Power Management ICs
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage (TJ = +25 C) VO -4.8 -5 -5.2 Vdc TJ = +25 C 2
Output Voltage VO -4.75 -5.25 Vdc -7.0 Vdc ≤ VI ≤ -20 Vdc, 1.0 mA ≤ IO ≤ 40 mA 2
Input Regulation (TJ = +25 C) Regline 150 mV TJ = +25 C; -7.0 Vdc ≤ VI ≤ -20 Vdc 2
Input Regulation (TJ = +25 C) Regline 100 mV TJ = +25 C; -8.0 Vdc ≤ VI ≤ -20 Vdc 2
Load Regulation Regload 60 mV TJ = +25 C, 1.0 mA ≤ IO ≤ 100 mA 2
Load Regulation Regload 30 mV 1.0 mA ≤ IO ≤ 40 mA 2
Input Bias Current (TJ = +25 C) IIB 6 mA TJ = +25 C 2
Input Bias Current (TJ = +125 C) IIB 5.5 mA TJ = +125 C 2
Input Bias Current Change IIB 1.5 mA -8.0 Vdc ≤ VI ≤ -20 Vdc 2
Input Bias Current Change IIB 0.1 mA 1.0 mA ≤ IO ≤ 40 mA 2
Ripple Rejection RR 41 49 dB -8.0 Vdc ≤ VI ≤ -18 Vdc, f = 120 Hz, TJ = +25 C 2
Input Voltage (-5 V device) VI -30 Vdc -5 V device 2
Storage Temperature Range Tstg -65 150 C 2
Junction Temperature TJ 150 C 2
Operating Junction Temperature Range (MC79LXXAB) TJ -40 125 C MC79L05AB 2
Thermal Resistance, Junction-to-Ambient (TO-92) RJA 160 C/W Case 29 (TO-92), TA = 25 C 2
Thermal Resistance, Junction-to-Case (TO-92) RJC 83 C/W Case 29 (TO-92) 2

CAD (KiCad official)

  • Symbol: MC79L05ABPRAG
  • Footprint: Package_TO_SOT_THT:TO-92_Inline
  • 3D model: TO-92-2.54mm (KiCad packages3D, STEP)
  • 3D model files: mc79l05abprag-etched.step / mc79l05abprag-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mc79l05abprag.step / mc79l05abprag.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (15 pp, sha256 01d4094522eaba96, retrieved 2026-11-21)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF