3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMC79L05ABPRAG
onsemi · Linear Voltage Regulators (LDO) · TO-92-2.54mm
MC79L05ABPRAG from onsemi, in a TO-92-2.54mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin, and a common ground is required between the input and the output voltages. |
| 2 | Input | power_in | Unregulated negative input (-Vin), which must remain typically 2.0 V above the output voltage even at the low point of the ripple, with an absolute input voltage rating of -30 V for the -5 V devices. |
| 3 | Output | power_out | Regulated negative output of -5.0 V nominal (-4.8 V to -5.2 V at TJ = +25 C), with a bypass capacitor CO of 0.1 uF recommended to improve stability and transient response. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | TO-92-2.54mm |
| Category | Power Management ICs |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage (TJ = +25 C) | VO | -4.8 | -5 | -5.2 | Vdc | TJ = +25 C | 2 |
| Output Voltage | VO | -4.75 | -5.25 | Vdc | -7.0 Vdc ≤ VI ≤ -20 Vdc, 1.0 mA ≤ IO ≤ 40 mA | 2 | |
| Input Regulation (TJ = +25 C) | Regline | 150 | mV | TJ = +25 C; -7.0 Vdc ≤ VI ≤ -20 Vdc | 2 | ||
| Input Regulation (TJ = +25 C) | Regline | 100 | mV | TJ = +25 C; -8.0 Vdc ≤ VI ≤ -20 Vdc | 2 | ||
| Load Regulation | Regload | 60 | mV | TJ = +25 C, 1.0 mA ≤ IO ≤ 100 mA | 2 | ||
| Load Regulation | Regload | 30 | mV | 1.0 mA ≤ IO ≤ 40 mA | 2 | ||
| Input Bias Current (TJ = +25 C) | IIB | 6 | mA | TJ = +25 C | 2 | ||
| Input Bias Current (TJ = +125 C) | IIB | 5.5 | mA | TJ = +125 C | 2 | ||
| Input Bias Current Change | IIB | 1.5 | mA | -8.0 Vdc ≤ VI ≤ -20 Vdc | 2 | ||
| Input Bias Current Change | IIB | 0.1 | mA | 1.0 mA ≤ IO ≤ 40 mA | 2 | ||
| Ripple Rejection | RR | 41 | 49 | dB | -8.0 Vdc ≤ VI ≤ -18 Vdc, f = 120 Hz, TJ = +25 C | 2 | |
| Input Voltage (-5 V device) | VI | -30 | Vdc | -5 V device | 2 | ||
| Storage Temperature Range | Tstg | -65 | 150 | C | 2 | ||
| Junction Temperature | TJ | 150 | C | 2 | |||
| Operating Junction Temperature Range (MC79LXXAB) | TJ | -40 | 125 | C | MC79L05AB | 2 | |
| Thermal Resistance, Junction-to-Ambient (TO-92) | RJA | 160 | C/W | Case 29 (TO-92), TA = 25 C | 2 | ||
| Thermal Resistance, Junction-to-Case (TO-92) | RJC | 83 | C/W | Case 29 (TO-92) | 2 |
CAD (KiCad official)
- Symbol:
MC79L05ABPRAG - Footprint:
Package_TO_SOT_THT:TO-92_Inline - 3D model: TO-92-2.54mm (KiCad packages3D, STEP)
- 3D model files:
mc79l05abprag-etched.step/mc79l05abprag-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mc79l05abprag.step/mc79l05abprag.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (15 pp, sha256
01d4094522eaba96, retrieved 2026-11-21) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).