Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

INA219AIDCNT

Texas Instruments · Current Sense Amplifiers · SOT-23-8

INA219AIDCNT from Texas Instruments, in a SOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN+ input Positive differential shunt voltage input; connect to positive side of shunt resistor; range ±40 mV to ±320 mV depending on PGA setting.
2 IN- input Negative differential shunt voltage input; connect to negative side of shunt resistor; bus voltage measured from this pin to ground.
3 GND power_in Analog ground.
4 VS power_in Analog power supply, 3 to 5.5 V.
5 SCL input Serial bus clock line for I²C/SMBus-compatible interface; digital input with open-drain structure.
6 SDA bidirectional Serial bus data line for I²C/SMBus-compatible interface; digital I/O with open-drain structure.
7 A0 input Address pin; logic level selects I²C slave address; sampled at start of each communication event.
8 A1 input Address pin; logic level selects I²C slave address; sampled at start of each communication event.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VS 6 V 4
Differential input voltage (VIN+ – VIN–) VIN+ – VIN– -26 26 V 4
Common-mode input voltage (VIN+ + VIN–)/2 -0.3 26 V (VIN+ + VIN–)/2 4
SDA voltage -0.3 6 V referenced to GND (printed GND – 0.3) 4
SCL voltage -0.3 V referenced to GND; printed max VS + 0.3 V 4
Input current into any pin 5 mA 4
Open-drain digital output current 10 mA 4
Operating temperature TA -40 125 °C 4
Junction temperature TJ 150 °C 4
Storage temperature Tstg -65 150 °C 4
Operating free-air temperature range TA -25 85 °C 4
Common-mode input voltage VCM 12 V single printed value; column not identified 4
Supply voltage (recommended) VS 3.3 V single printed value; column not identified 4
Junction-to-ambient thermal resistance (DCN) RθJA 135.4 °C/W SOT-23 (DCN) 8 pins 4
Junction-to-case (top) thermal resistance (DCN) RθJC(top) 68.1 °C/W SOT-23 (DCN) 8 pins 4
Junction-to-board thermal resistance (DCN) RθJB 48.9 °C/W SOT-23 (DCN) 8 pins 4
Junction-to-top characterization parameter (DCN) ψJT 9.9 °C/W SOT-23 (DCN) 8 pins 4
Junction-to-board characterization parameter (DCN) ψJB 48.4 °C/W SOT-23 (DCN) 8 pins 4
Full-scale current sense (input) voltage range, PGA /1 VSHUNT 0 40 mV PGA = /1 5
Full-scale current sense (input) voltage range, PGA /2 VSHUNT 0 80 mV PGA = /2 5
Full-scale current sense (input) voltage range, PGA /4 VSHUNT 0 160 mV PGA = /4 5
Full-scale current sense (input) voltage range, PGA /8 VSHUNT 0 320 mV PGA = /8 5
Bus voltage (input voltage) range 0 32 V BRNG = 1 5
Bus voltage (input voltage) range 0 16 V BRNG = 0 5
Common-mode rejection CMRR 100 120 dB VIN+ = 0 to 26 V 5
Offset voltage, RTI, PGA /1 VOS -100 10 100 μV PGA = /1 5
Offset voltage, RTI, PGA /2 VOS -125 20 125 μV PGA = /2 5
Offset voltage, RTI, PGA /4 VOS -150 30 150 μV PGA = /4 5
Offset voltage, RTI, PGA /8 VOS -200 40 200 μV PGA = /8 5
IN+ pin input leakage -0.5 0.1 0.5 μA Power-down mode 5
IN– pin input leakage -0.5 0.1 0.5 μA Power-down mode 5
Current sense gain error -40 40 m% 5
Current measurement error -0.5 0.2 0.5 % 5
Current measurement error over temperature -1 1 % TA = –25°C to 85°C 5
Bus voltage measurement error -0.5 0.2 0.5 % 5
Bus voltage measurement error over temperature -1 1 % TA = –25°C to 85°C 5
ADC conversion time 532 586 μs 12 bit 5
ADC conversion time 276 304 μs 11 bit 5
ADC conversion time 148 163 μs 10 bit 5
ADC conversion time 84 93 μs 9 bit 5
Minimum convert input low time 4 μs 5
SMBus timeout 28 35 ms 5
Leakage input current (digital inputs) 0.1 1 μA 0 ≤ VIN ≤ VS 5
VIH input logic level VIH 6 V min printed as 0.7 (VS) 5
VIL input logic level VIL -0.3 V max printed as 0.3 (VS) 5
Logic 0 output level 0.15 0.4 V ISINK = 3 mA 6
High-level output leakage current 0.1 1 μA VOUT = VS 6
Operating supply range 3 5.5 V 6
Quiescent current IQ 0.7 1 mA 6
Quiescent current, power-down mode IQ 6 15 μA Power-down mode 6

CAD (KiCad official)

  • Symbol: INA219AIDCNT
  • Footprint: Package_TO_SOT_SMD:SOT-23-8
  • 3D model: SOT-23-8 (KiCad packages3D, STEP)
  • 3D model files: ina219aidcnt-etched.step / ina219aidcnt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina219aidcnt.step / ina219aidcnt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (38 pp, sha256 2c973858ed829073, retrieved 2026-09-27, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF