Generated by kicad-footprint-generator · KiCad file format 20260206
INA219AIDCNT
Texas Instruments · Current Sense Amplifiers · SOT-23-8
INA219AIDCNT from Texas Instruments, in a SOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN+ | input | Positive differential shunt voltage input; connect to positive side of shunt resistor; range ±40 mV to ±320 mV depending on PGA setting. |
| 2 | IN- | input | Negative differential shunt voltage input; connect to negative side of shunt resistor; bus voltage measured from this pin to ground. |
| 3 | GND | power_in | Analog ground. |
| 4 | VS | power_in | Analog power supply, 3 to 5.5 V. |
| 5 | SCL | input | Serial bus clock line for I²C/SMBus-compatible interface; digital input with open-drain structure. |
| 6 | SDA | bidirectional | Serial bus data line for I²C/SMBus-compatible interface; digital I/O with open-drain structure. |
| 7 | A0 | input | Address pin; logic level selects I²C slave address; sampled at start of each communication event. |
| 8 | A1 | input | Address pin; logic level selects I²C slave address; sampled at start of each communication event. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VS | 6 | V | 4 | |||
| Differential input voltage (VIN+ – VIN–) | VIN+ – VIN– | -26 | 26 | V | 4 | ||
| Common-mode input voltage (VIN+ + VIN–)/2 | -0.3 | 26 | V | (VIN+ + VIN–)/2 | 4 | ||
| SDA voltage | -0.3 | 6 | V | referenced to GND (printed GND – 0.3) | 4 | ||
| SCL voltage | -0.3 | V | referenced to GND; printed max VS + 0.3 V | 4 | |||
| Input current into any pin | 5 | mA | 4 | ||||
| Open-drain digital output current | 10 | mA | 4 | ||||
| Operating temperature | TA | -40 | 125 | °C | 4 | ||
| Junction temperature | TJ | 150 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Operating free-air temperature range | TA | -25 | 85 | °C | 4 | ||
| Common-mode input voltage | VCM | 12 | V | single printed value; column not identified | 4 | ||
| Supply voltage (recommended) | VS | 3.3 | V | single printed value; column not identified | 4 | ||
| Junction-to-ambient thermal resistance (DCN) | RθJA | 135.4 | °C/W | SOT-23 (DCN) 8 pins | 4 | ||
| Junction-to-case (top) thermal resistance (DCN) | RθJC(top) | 68.1 | °C/W | SOT-23 (DCN) 8 pins | 4 | ||
| Junction-to-board thermal resistance (DCN) | RθJB | 48.9 | °C/W | SOT-23 (DCN) 8 pins | 4 | ||
| Junction-to-top characterization parameter (DCN) | ψJT | 9.9 | °C/W | SOT-23 (DCN) 8 pins | 4 | ||
| Junction-to-board characterization parameter (DCN) | ψJB | 48.4 | °C/W | SOT-23 (DCN) 8 pins | 4 | ||
| Full-scale current sense (input) voltage range, PGA /1 | VSHUNT | 0 | 40 | mV | PGA = /1 | 5 | |
| Full-scale current sense (input) voltage range, PGA /2 | VSHUNT | 0 | 80 | mV | PGA = /2 | 5 | |
| Full-scale current sense (input) voltage range, PGA /4 | VSHUNT | 0 | 160 | mV | PGA = /4 | 5 | |
| Full-scale current sense (input) voltage range, PGA /8 | VSHUNT | 0 | 320 | mV | PGA = /8 | 5 | |
| Bus voltage (input voltage) range | 0 | 32 | V | BRNG = 1 | 5 | ||
| Bus voltage (input voltage) range | 0 | 16 | V | BRNG = 0 | 5 | ||
| Common-mode rejection | CMRR | 100 | 120 | dB | VIN+ = 0 to 26 V | 5 | |
| Offset voltage, RTI, PGA /1 | VOS | -100 | 10 | 100 | μV | PGA = /1 | 5 |
| Offset voltage, RTI, PGA /2 | VOS | -125 | 20 | 125 | μV | PGA = /2 | 5 |
| Offset voltage, RTI, PGA /4 | VOS | -150 | 30 | 150 | μV | PGA = /4 | 5 |
| Offset voltage, RTI, PGA /8 | VOS | -200 | 40 | 200 | μV | PGA = /8 | 5 |
| IN+ pin input leakage | -0.5 | 0.1 | 0.5 | μA | Power-down mode | 5 | |
| IN– pin input leakage | -0.5 | 0.1 | 0.5 | μA | Power-down mode | 5 | |
| Current sense gain error | -40 | 40 | m% | 5 | |||
| Current measurement error | -0.5 | 0.2 | 0.5 | % | 5 | ||
| Current measurement error over temperature | -1 | 1 | % | TA = –25°C to 85°C | 5 | ||
| Bus voltage measurement error | -0.5 | 0.2 | 0.5 | % | 5 | ||
| Bus voltage measurement error over temperature | -1 | 1 | % | TA = –25°C to 85°C | 5 | ||
| ADC conversion time | 532 | 586 | μs | 12 bit | 5 | ||
| ADC conversion time | 276 | 304 | μs | 11 bit | 5 | ||
| ADC conversion time | 148 | 163 | μs | 10 bit | 5 | ||
| ADC conversion time | 84 | 93 | μs | 9 bit | 5 | ||
| Minimum convert input low time | 4 | μs | 5 | ||||
| SMBus timeout | 28 | 35 | ms | 5 | |||
| Leakage input current (digital inputs) | 0.1 | 1 | μA | 0 ≤ VIN ≤ VS | 5 | ||
| VIH input logic level | VIH | 6 | V | min printed as 0.7 (VS) | 5 | ||
| VIL input logic level | VIL | -0.3 | V | max printed as 0.3 (VS) | 5 | ||
| Logic 0 output level | 0.15 | 0.4 | V | ISINK = 3 mA | 6 | ||
| High-level output leakage current | 0.1 | 1 | μA | VOUT = VS | 6 | ||
| Operating supply range | 3 | 5.5 | V | 6 | |||
| Quiescent current | IQ | 0.7 | 1 | mA | 6 | ||
| Quiescent current, power-down mode | IQ | 6 | 15 | μA | Power-down mode | 6 |
CAD (KiCad official)
- Symbol:
INA219AIDCNT - Footprint:
Package_TO_SOT_SMD:SOT-23-8 - 3D model: SOT-23-8 (KiCad packages3D, STEP)
- 3D model files:
ina219aidcnt-etched.step/ina219aidcnt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina219aidcnt.step/ina219aidcnt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (38 pp, sha256
2c973858ed829073, retrieved 2026-09-27, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).