EEE-FK1V470P

{
 "schema": "adom/mark-plan@1",
 "mpn": "EEE-FK1V470P",
 "step": "/home/adom/project/basic-parts-overhaul/pages-extra/eee-fk1v470p/EEE-FK1V470P-etched.step",
 "footprint": "/home/adom/project/basic-parts-overhaul/pages-extra/eee-fk1v470p/EEE-FK1V470P.kicad_mod",
 "standUp": [
  {
   "axis": "x",
   "quarterTurns": 1
  },
  {
   "axis": "z",
   "quarterTurns": 2
  }
 ],
 "standUpSource": "footprint model rotate",
 "face": "top",
 "pin1": {
  "source": "footprint pad 1",
  "xyMm": [
   -2.7,
   -0.0
  ],
  "corner": "left/middle"
 },
 "existingMarks": [
  "Adom.LaserEtch"
 ],
 "vendorMarking": {
  "present": false,
  "glyphFaces": 2
 },
 "faceNormal": [
  0,
  0,
  1
 ],
 "longAxis": {
  "axis": "x",
  "vector": [
   1.0,
   0.0,
   0.0
  ],
  "why": "two-terminal part: along the body, pad 1 to pad 2 (between the terminations)",
  "override": null
 },
 "readingDirection": {
  "vector": [
   1.0,
   0.0,
   0.0
  ],
  "angleDeg": 0,
  "textUp": [
   -0.0,
   1.0,
   0.0
  ],
  "rule": "pin 1 / pad 1 at the start (left) of the text, and below it when it sits on a side"
 },
 "band": {
  "regionMm": [
   -2.65,
   -2.652,
   0.75,
   2.648
  ],
  "zMm": 5.798,
  "lengthMm": 3.4,
  "heightMm": 5.3,
  "why": "highest flat face over the body centre",
  "terminationsExcludedBy": null,
  "trimmedEnds": [],
  "keepouts": [],
  "sideTurn": null,
  "margins": {
   "lengthEachSide": 0.12,
   "heightEachSide": 0.15
  }
 },
 "text": {
  "lines": [
   "EEE-FK",
   "1V470P"
  ],
  "chars": 12,
  "capHeightMm": 0.5451,
  "smallestLineMm": 0.5451,
  "heightPctOfBand": 23.7,
  "why": "two lines: the smaller line (0.545 mm) beats one line (0.267 mm) by 2.04x",
  "alternative": {
   "lines": [
    "EEE-FK1V470P"
   ],
   "capHeightMm": 0.2675,
   "smallestLineMm": 0.2675
  },
  "font": "service-step2glb /laser-etch (single-stroke outline font)"
 },
 "etch": {
  "poseQuarterTurnsZ": 0,
  "service": "/laser-etch?mode=flat",
  "note": "turn so the reading direction is +X, etch, fit the mark into the band, turn back"
 },
 "outline": {
  "upAxis": "z",
  "poseRotZDeg": 180,
  "rot": 180,
  "recipe": "adom-aiflow-etch outline <part.step> --footprint <part.kicad_mod> --mpn EEE-FK1V470P (stands the STEP up (footprint model rotate), turns it 180 deg about Z and draws EEE-FK / 1V470P on the planned band, rot 180)",
  "why": "iso camera looks from +X+Y+Z: text along +Y (rot 90) or -X (rot 180) reads left to right with pin 1 toward the viewer"
 },
 "widget": {
  "px": 320,
  "pxPerMm": 28.2,
  "capHeightPx": 12.5
 },
 "hints": [],
 "warnings": [
  "the STEP already carries a mark (Adom.LaserEtch); etch from the plain model, or let adom-aiflow-etch replace it (it does by default)"
 ],
 "summary": "Mark along the 3.40 mm axis (+X), 0.55 mm text (2 lines), upright with pin 1 left middle, outline rot 180 after a 180 deg pose turn; ~13 px caps at 320 px"
}