by John Lauer
An independently designed 12 V to 5 V, 1 A synchronous buck molecule (TI TPS54202), with calculations, ngspice and PSpice simulation, KiCad 10 schematic and board, and the board laid out and analysed with adom-aiflow.
531f515
12 V to 5 V / 1 A Buck Molecule (TPS54202)

A 12 V to 5 V, 1 A synchronous buck on the TI TPS54202, designed as a 28 x 20 mm Adom molecule.
It takes the brief from the YouTube video "Hardware Design with GPT-6: Schematic, PSpice & PCB" by Inside Embedded (12 V in, 5 V at 1 A out, terminals, test points) and designs it again from scratch. Every value comes from the datasheet equations. The loop and the switching behaviour were simulated in ngspice, and the result was checked against TI's own PSpice model. The board was placed, routed, poured and analysed in KiCad 10 with Adom AI Flow, and its copper was checked for current density and temperature with Adom Fields.
It was built with a set of Adom tools working together; here is the full list.
The board has not been fabricated yet. Everything below is design and simulation.
The videos
![]() |
![]() |
| AI PCB Design for Engineers (about 4 min). The whole build: the prompt in Adom Hydrogen, the circuit, three SPICE engines in agreement, the live layout in KiCad 10, the current and heat analysis and the rework it caused, and the part models. How it was made. | Where the Current and Heat Go (8 min 44 s). This board solved in Adom Fields, in eleven narrated views: current density, heat flow, temperature, the current and voltage flowing, energy, how fast a switch-on travels, the energy cycle, charge, the magnetic field and EMC. The numbers. |
Fusion 360: the same buck, built by AI in Autodesk Fusion
Fusion 360 |
The same brief, run a second time in Autodesk Fusion 360 instead of KiCad, by Claude on Adom AI Flow with the Fusion Bridge driving Fusion. The Fusion 360 build walks through all 21 steps with screenshots, from the one-line prompt through the library, schematic, SPICE, placement loop-backs, routing, current and heat, and silkscreen, to the exported fab files. It also covers what the run cost on each Claude plan and how the video was made. The Fusion 360 build, step by step |
ECAS vs MLCC: should this buck move to polymer capacitors?
ECAS vs MLCC |
A study of swapping this board's ceramic capacitors for Murata ECAS polymer capacitors, using measured part data, ten capacitor sets through the board's own SPICE models, and Adom Fields on the real copper. The answer is not a straight swap: an ECAS with a 0.22 Ω damping resistor earns the input can's place, cutting the tallest capacitor from 5.8 to 2.0 mm, while ceramics stay on the output. The study also found that the as-built feed-forward capacitor should be 47 pF, not 68 pF, once the ceramics' real DC-bias loss is counted. The study, with every chart and number |
Gallery
| top | bottom (seen from below) |
|---|---|
![]() |
![]() |
Copper, exposed pads and silkscreen from the KiCad 10 board, drawn to scale. The bottom is mirrored, so it reads as you would see it with the board flipped over.
Key specs
| input | 12 V nominal, designed for 9 to 16 V; EN undervoltage lockout starts at 8.58 V and stops at 6.87 V |
| output | 5 V (4.98 V nominal from stocked divider values), 1 A continuous |
| controller | TI TPS54202DDCR, 500 kHz synchronous buck, internal compensation, SOT-23-6 |
| inductor | 15 uH Abracon AMPLH5030S-150MT (Isat 3.7 A) |
| output capacitance | 3 x 22 uF X5R, 36.3 uF effective at 5 V |
| loop (ngspice, 12 V, 1 A) | 28.6 kHz crossover, 110 deg phase margin with 68 pF Cff |
| output ripple (ngspice, 12 V, 1 A) | 3.2 mV peak to peak |
| load step (TI PSpice model) | about 185 mV (3.7 %) for a 1 A step |
| efficiency (estimate) | 93 % at 12 V, 1 A |
| current density (Adom Fields) | 50 A/mm2 peak, at the SW node beside U1 |
| thermal (Adom Fields, still air) | U1 +45 C at its GND pin, L1 +41 C; 55 C junction-based budget |
| board | 28 x 20 mm, 2 layers, 0.5 oz copper, 4 medium machine pins on a 24 x 16 mm grid, 7 contacts, 7 probe pads |
| DRC (KiCad 10.0.5) | 0 errors, 0 unconnected; the board matches the schematic |
| sourcing | Mouser plus Adom stocked basic parts, for a 3rd party fab |
Molecule interface
28 x 20 mm, 2 layers. Positions are in mm from MP1. The molecule's GLB, STEP, footprint and symbol JSON are in molecule/; the KiCad 10 project is in kicad/.
| contact | position | net | notes |
|---|---|---|---|
| J1 | (0, 12) | VIN | 9 to 16 V, 12 V nominal; UVLO starts at 8.58 V, stops at 6.87 V |
| J2 | (0, 8) | GND | input return |
| J3 | (0, 4) | EN | open drain low turns it off; released, the UVLO divider decides |
| J4 | (24, 12) | VOUT | 4.98 V, 1 A |
| J5 | (24, 8) | GND | output and signal ground |
| J6 | (24, 4) | VMON | VOUT / 2 (2.49 V) for a 3.3 V ADC, 5 k source |
| J7 | (5.25, 2.25) | GND | spare ground contact for test equipment |
| MP1 to MP4 | (0, 0), (24, 0), (0, 16), (24, 16) | GND | medium machine pins |
Probe pads: TP1 SW (15.6, 4.9), TP2 FB (9.4, 5.6), TP3 VOUT (21.6, 4.9), TP4 GND (15.6, 2.8), TP6 VIN (2.05, 1.95), TP7 VIN at C2 (7.0, 16.75), TP8 VOUT at L1's output (22.5, 14.0).
Parts
Every part on this board has its own page on the Adom wiki, with its symbol, footprint and 3D model, ready to reuse in your own designs. Click a part to open its page. The BOM with every distributor number is design/bom.csv.
| part | qty | refs | value | what it does | source |
|---|---|---|---|---|---|
![]() TPS54202DDCR Texas Instruments |
1 | U1 | TPS54202DDCR | sync buck 4.5-28 V 2 A 500 kHz | Mouser 595-TPS54202DDCR |
![]() AMPLH5030S-150MT Abracon |
1 | L1 | 15uH | output inductor | Mouser 815-AMPLH5030S-150T |
![]() EEE-FK1V470P Panasonic |
1 | C1 | 47uF 35V | input bulk (cable damping) | Mouser 667-EEE-FK1V470P |
![]() CC1206KKX7R8BB106 Yageo |
2 | C2, C3 | 10uF 25V X7R | input ceramic | Mouser 603-CC126KKX7R8BB106 |
![]() 0603B104J500CT Walsin |
2 | C4, C5 | 100nF 50V X7R | VIN pin HF bypass | Adom stock |
![]() CL21A226MPQNNNE Samsung |
3 | C6, C7, C8 | 22uF 10V X5R | output ceramic | Adom stock |
![]() 0402N680J500CT Walsin |
1 | C9 | 68pF C0G | feed-forward across Rtop | Adom stock |
![]() CR0402-FX-6802GLF Bourns |
1 | R1 | 68k | FB top (series part 1) | Adom stock |
![]() CR0402-FX-5601GLF Bourns |
1 | R2 | 5.6k | FB top (series part 2) | Adom stock |
![]() CR0402-FX-1002GLF Bourns |
3 | R3, R7, R8 | 10k | FB bottom | Adom stock |
![]() CR0402-FX-1004GLF Bourns |
1 | R4 | 1M | EN UVLO top | Adom stock |
![]() CR0402-FX-1503GLF Bourns |
1 | R5 | 150k | EN UVLO bottom | Adom stock |
![]() CR0402-FX-2201GLF Bourns |
1 | R6 | 2.2k | LED resistor | Adom stock |
![]() IN-S63BTG Inolux |
1 | D1 | green LED | 5 V power-good indicator | Adom stock |
![]() MachineContactMedium Adom |
7 | J1 to J7 | MachineContactMedium | molecule contact: VIN, GND, EN, VOUT, VMON, and a spare GND | Adom stock |
![]() MachinePinMediumShort Adom |
4 | MP1 to MP4 | MachinePinMediumShort | corner machine pin (GND) | Adom stock |
Feature guides
| guide | what it covers |
|---|---|
| The Adom tools | Every Adom tool used on this board, what each one did, and a link to its page. |
| Circuit design | The brief, why the TPS54202, and every calculation: inductor (15 uH vs Lmin), COUT, the 68 pF Cff, the stocked-value divider search, EN UVLO, bootstrap, losses. |
| Simulation | ngspice loop gain across Cff, the switching transient at 9, 12 and 16 V, and the check against TI's PSpice model. |
| Sourcing | The BOM with Mouser part numbers, the 3rd party fab sourcing policy, and where every 3D model came from. |
| Board | Molecule format, design rules, placement, routing, pours with the SW patch, DRC, copper and silkscreen. |
| Thermal and current | Adom Fields current density (SW peak 50 A/mm2), where the heat goes, and the still-air budget. |
| How the video was made | Capturing the footage while the board is built, the shots and scenes, and putting the video together. |
| Probing before ordering | The probing workcell's test plan, each test a copy of a SPICE run, the simulated scope captures, and the loops that sent the board back to layout for J7, TP6, TP7 and TP8. |
| Build clips | Watch the board being built in KiCad: placement, routing, pours, the analyses and the silkscreen. |
| Fusion 360 build | The same buck built by AI in Autodesk Fusion 360: every step with screenshots, the cost per Claude plan, and how the video was made. |
| ECAS vs MLCC | Swapping the ceramics for polymer capacitors: measured DC-bias data, ten capacitor sets in SPICE, hot plug, rail impedance in Adom Fields, board size, cost, and the 47 pF Cff finding. |
What is in this repo
| folder | contents |
|---|---|
design/ |
calcs.py (every datasheet equation, run it to regenerate calcs.json) and bom.csv |
sim/ |
the ngspice loop and switching models with their results and plots, and the TI PSpice comparison |
kicad/ |
KiCad 10 project: schematic, board, design rules, the netlist the board was generated from, the generator scripts, project libraries and every 3D model |
aiflow/spec.json |
the layout constraints the board was built to: wide nets, Kelvin taps, loads, hot parts, pours and the thermal budget |
molecule/ |
the molecule STEP (KiCad 10 export), the anchored GLB and the footprint and symbol JSON |
verification.json |
the verification log behind the badge at the top: the checks, and the SHA-256 of every file they cover |
# 12 V to 5 V / 1 A Buck Molecule (TPS54202)
::adom-verified{src="/john/buck-12v5v-molecule/render/verification.json"}

A 12 V to 5 V, 1 A synchronous buck on the TI TPS54202, designed as a 28 x 20 mm Adom molecule.
It takes the brief from the YouTube video "Hardware Design with GPT-6: Schematic, PSpice & PCB" by Inside Embedded (12 V in, 5 V at 1 A out, terminals, test points) and designs it again from scratch. Every value comes from the datasheet equations. The loop and the switching behaviour were simulated in ngspice, and the result was checked against TI's own PSpice model. The board was placed, routed, poured and analysed in KiCad 10 with [Adom AI Flow](https://wiki.adom.inc/adom/adom-aiflow), and its copper was checked for current density and temperature with [Adom Fields](https://wiki.adom.inc/adom/adom-fields).
It was built with a set of Adom tools working together; [here is the full list](docs/tools.md).
The board has not been fabricated yet. Everything below is design and simulation.
## The videos
<table>
<tr>
<td width="50%"><a href="https://www.youtube.com/watch?v=vKUMzy261zs"><img src="docs/img/video-youtube.jpg" alt="AI PCB Design for Engineers: watch on YouTube"></a></td>
<td width="50%"><a href="https://www.youtube.com/watch?v=GtEOlbPonTs"><img src="docs/img/fields-video-youtube.jpg" alt="Where the Current and Heat Go: watch on YouTube"></a></td>
</tr>
<tr>
<td><strong><a href="https://www.youtube.com/watch?v=vKUMzy261zs">AI PCB Design for Engineers</a></strong> (about 4 min). The whole build: the prompt in <a href="https://wiki.adom.inc/adom/hydrogen">Adom Hydrogen</a>, the circuit, three SPICE engines in agreement, the live layout in KiCad 10, the current and heat analysis and the rework it caused, and the part models. <a href="docs/process-video.md">How it was made</a>.</td>
<td><strong><a href="https://www.youtube.com/watch?v=GtEOlbPonTs">Where the Current and Heat Go</a></strong> (8 min 44 s). This board solved in <a href="https://wiki.adom.inc/adom/adom-fields">Adom Fields</a>, in eleven narrated views: current density, heat flow, temperature, the current and voltage flowing, energy, how fast a switch-on travels, the energy cycle, charge, the magnetic field and EMC. <a href="docs/thermal-current.md">The numbers</a>.</td>
</tr>
</table>
## Fusion 360: the same buck, built by AI in Autodesk Fusion
<table>
<tr>
<td width="104"><a href="fusion-360/README.md"><img src="fusion-360/fusion-360-icon.png" width="112" alt="The buck in Fusion 360"></a><br><sub> Fusion 360 </sub></td>
<td>The same brief, run a second time in Autodesk Fusion 360 instead of KiCad, by Claude on <a href="https://wiki.adom.inc/adom/adom-aiflow">Adom AI Flow</a> with the <a href="https://wiki.adom.inc/adom/fusion-bridge">Fusion Bridge</a> driving Fusion. <strong><a href="fusion-360/README.md">The Fusion 360 build</a></strong> walks through all 21 steps with screenshots, from the one-line prompt through the library, schematic, SPICE, placement loop-backs, routing, current and heat, and silkscreen, to the exported fab files. It also covers what the run cost on each Claude plan and how the video was made.<br><br><a href="fusion-360/README.md">The Fusion 360 build, step by step</a></td>
</tr>
</table>
## ECAS vs MLCC: should this buck move to polymer capacitors?
<table>
<tr>
<td width="104"><a href="ecas-capacitors/README.md"><img src="ecas-capacitors/img/ecas-capacitors-icon.png" width="112" alt="ECAS vs MLCC"></a><br><sub> ECAS vs MLCC </sub></td>
<td>A study of swapping this board's ceramic capacitors for Murata ECAS polymer capacitors, using measured part data, ten capacitor sets through the board's own SPICE models, and Adom Fields on the real copper. <strong><a href="ecas-capacitors/README.md">The answer</a></strong> is not a straight swap: an ECAS with a 0.22 Ω damping resistor earns the input can's place, cutting the tallest capacitor from 5.8 to 2.0 mm, while ceramics stay on the output. The study also found that the as-built feed-forward capacitor should be 47 pF, not 68 pF, once the ceramics' real DC-bias loss is counted.<br><br><a href="ecas-capacitors/README.md">The study, with every chart and number</a></td>
</tr>
</table>
## Gallery
| top | bottom (seen from below) |
|---|---|
|  |  |
Copper, exposed pads and silkscreen from the KiCad 10 board, drawn to scale. The bottom is mirrored, so it reads as you would see it with the board flipped over.
## Key specs
| | |
|---|---|
| input | 12 V nominal, designed for 9 to 16 V; EN undervoltage lockout starts at 8.58 V and stops at 6.87 V |
| output | 5 V (4.98 V nominal from stocked divider values), 1 A continuous |
| controller | TI TPS54202DDCR, 500 kHz synchronous buck, internal compensation, SOT-23-6 |
| inductor | 15 uH Abracon AMPLH5030S-150MT (Isat 3.7 A) |
| output capacitance | 3 x 22 uF X5R, 36.3 uF effective at 5 V |
| loop (ngspice, 12 V, 1 A) | 28.6 kHz crossover, 110 deg phase margin with 68 pF Cff |
| output ripple (ngspice, 12 V, 1 A) | 3.2 mV peak to peak |
| load step (TI PSpice model) | about 185 mV (3.7 %) for a 1 A step |
| efficiency (estimate) | 93 % at 12 V, 1 A |
| current density (Adom Fields) | 50 A/mm2 peak, at the SW node beside U1 |
| thermal (Adom Fields, still air) | U1 +45 C at its GND pin, L1 +41 C; 55 C junction-based budget |
| board | 28 x 20 mm, 2 layers, 0.5 oz copper, 4 medium machine pins on a 24 x 16 mm grid, 7 contacts, 7 probe pads |
| DRC (KiCad 10.0.5) | 0 errors, 0 unconnected; the board matches the schematic |
| sourcing | Mouser plus [Adom stocked basic parts](https://wiki.adom.inc/adom/adom-basic-parts), for a 3rd party fab |
## Molecule interface
28 x 20 mm, 2 layers. Positions are in mm from MP1. The molecule's GLB, STEP, footprint and symbol JSON are in `molecule/`; the KiCad 10 project is in `kicad/`.
| contact | position | net | notes |
|---|---|---|---|
| J1 | (0, 12) | VIN | 9 to 16 V, 12 V nominal; UVLO starts at 8.58 V, stops at 6.87 V |
| J2 | (0, 8) | GND | input return |
| J3 | (0, 4) | EN | open drain low turns it off; released, the UVLO divider decides |
| J4 | (24, 12) | VOUT | 4.98 V, 1 A |
| J5 | (24, 8) | GND | output and signal ground |
| J6 | (24, 4) | VMON | VOUT / 2 (2.49 V) for a 3.3 V ADC, 5 k source |
| J7 | (5.25, 2.25) | GND | spare ground contact for test equipment |
| MP1 to MP4 | (0, 0), (24, 0), (0, 16), (24, 16) | GND | medium machine pins |
Probe pads: TP1 SW (15.6, 4.9), TP2 FB (9.4, 5.6), TP3 VOUT (21.6, 4.9), TP4 GND (15.6, 2.8), TP6 VIN (2.05, 1.95), TP7 VIN at C2 (7.0, 16.75), TP8 VOUT at L1's output (22.5, 14.0).
## Parts
Every part on this board has its own page on the Adom wiki, with its symbol, footprint and 3D model, ready to reuse in your own designs. Click a part to open its page. The BOM with every distributor number is [design/bom.csv](design/bom.csv).
| part | qty | refs | value | what it does | source |
|---|---|---|---|---|---|
| <a href="https://wiki.adom.inc/adom/tps54202ddcr"><img src="docs/parts/tps54202ddcr.png?v=8124369c" width="64" alt="TPS54202DDCR"></a><br>**[TPS54202DDCR](https://wiki.adom.inc/adom/tps54202ddcr)**<br>Texas Instruments | 1 | U1 | TPS54202DDCR | sync buck 4.5-28 V 2 A 500 kHz | [Mouser 595-TPS54202DDCR](https://www.mouser.com/ProductDetail/595-TPS54202DDCR) |
| <a href="https://wiki.adom.inc/john/amplh5030s-150mt"><img src="docs/parts/amplh5030s-150mt.png?v=03a239da" width="64" alt="AMPLH5030S-150MT"></a><br>**[AMPLH5030S-150MT](https://wiki.adom.inc/john/amplh5030s-150mt)**<br>Abracon | 1 | L1 | 15uH | output inductor | [Mouser 815-AMPLH5030S-150T](https://www.mouser.com/ProductDetail/815-AMPLH5030S-150T) |
| <a href="https://wiki.adom.inc/john/eee-fk1v470p"><img src="docs/parts/eee-fk1v470p.png?v=9a4b5ad4" width="64" alt="EEE-FK1V470P"></a><br>**[EEE-FK1V470P](https://wiki.adom.inc/john/eee-fk1v470p)**<br>Panasonic | 1 | C1 | 47uF 35V | input bulk (cable damping) | [Mouser 667-EEE-FK1V470P](https://www.mouser.com/ProductDetail/667-EEE-FK1V470P) |
| <a href="https://wiki.adom.inc/john/cc1206kkx7r8bb106"><img src="docs/parts/cc1206kkx7r8bb106.png?v=f4d196bf" width="64" alt="CC1206KKX7R8BB106"></a><br>**[CC1206KKX7R8BB106](https://wiki.adom.inc/john/cc1206kkx7r8bb106)**<br>Yageo | 2 | C2, C3 | 10uF 25V X7R | input ceramic | [Mouser 603-CC126KKX7R8BB106](https://www.mouser.com/ProductDetail/603-CC126KKX7R8BB106) |
| <a href="https://wiki.adom.inc/adom/0603b104j500ct"><img src="docs/parts/0603b104j500ct.png?v=073322b9" width="64" alt="0603B104J500CT"></a><br>**[0603B104J500CT](https://wiki.adom.inc/adom/0603b104j500ct)**<br>Walsin | 2 | C4, C5 | 100nF 50V X7R | VIN pin HF bypass | [Adom stock](https://wiki.adom.inc/adom/adom-basic-parts) |
| <a href="https://wiki.adom.inc/adom/cl21a226mpqnnne"><img src="docs/parts/cl21a226mpqnnne.png?v=cf34a6ad" width="64" alt="CL21A226MPQNNNE"></a><br>**[CL21A226MPQNNNE](https://wiki.adom.inc/adom/cl21a226mpqnnne)**<br>Samsung | 3 | C6, C7, C8 | 22uF 10V X5R | output ceramic | [Adom stock](https://wiki.adom.inc/adom/adom-basic-parts) |
| <a href="https://wiki.adom.inc/adom/0402n680j500ct"><img src="docs/parts/0402n680j500ct.png?v=4d668a63" width="64" alt="0402N680J500CT"></a><br>**[0402N680J500CT](https://wiki.adom.inc/adom/0402n680j500ct)**<br>Walsin | 1 | C9 | 68pF C0G | feed-forward across Rtop | [Adom stock](https://wiki.adom.inc/adom/adom-basic-parts) |
| <a href="https://wiki.adom.inc/adom/cr0402-fx-6802glf"><img src="docs/parts/cr0402-fx-6802glf.png?v=6ca13f09" width="64" alt="CR0402-FX-6802GLF"></a><br>**[CR0402-FX-6802GLF](https://wiki.adom.inc/adom/cr0402-fx-6802glf)**<br>Bourns | 1 | R1 | 68k | FB top (series part 1) | [Adom stock](https://wiki.adom.inc/adom/adom-basic-parts) |
| <a href="https://wiki.adom.inc/adom/cr0402-fx-5601glf"><img src="docs/parts/cr0402-fx-5601glf.png?v=4ead7597" width="64" alt="CR0402-FX-5601GLF"></a><br>**[CR0402-FX-5601GLF](https://wiki.adom.inc/adom/cr0402-fx-5601glf)**<br>Bourns | 1 | R2 | 5.6k | FB top (series part 2) | [Adom stock](https://wiki.adom.inc/adom/adom-basic-parts) |
| <a href="https://wiki.adom.inc/adom/cr0402-fx-1002glf"><img src="docs/parts/cr0402-fx-1002glf.png?v=47a6e33d" width="64" alt="CR0402-FX-1002GLF"></a><br>**[CR0402-FX-1002GLF](https://wiki.adom.inc/adom/cr0402-fx-1002glf)**<br>Bourns | 3 | R3, R7, R8 | 10k | FB bottom | [Adom stock](https://wiki.adom.inc/adom/adom-basic-parts) |
| <a href="https://wiki.adom.inc/adom/cr0402-fx-1004glf"><img src="docs/parts/cr0402-fx-1004glf.png?v=0822eb09" width="64" alt="CR0402-FX-1004GLF"></a><br>**[CR0402-FX-1004GLF](https://wiki.adom.inc/adom/cr0402-fx-1004glf)**<br>Bourns | 1 | R4 | 1M | EN UVLO top | [Adom stock](https://wiki.adom.inc/adom/adom-basic-parts) |
| <a href="https://wiki.adom.inc/adom/cr0402-fx-1503glf"><img src="docs/parts/cr0402-fx-1503glf.png?v=a9be28f3" width="64" alt="CR0402-FX-1503GLF"></a><br>**[CR0402-FX-1503GLF](https://wiki.adom.inc/adom/cr0402-fx-1503glf)**<br>Bourns | 1 | R5 | 150k | EN UVLO bottom | [Adom stock](https://wiki.adom.inc/adom/adom-basic-parts) |
| <a href="https://wiki.adom.inc/adom/cr0402-fx-2201glf"><img src="docs/parts/cr0402-fx-2201glf.png?v=124897f2" width="64" alt="CR0402-FX-2201GLF"></a><br>**[CR0402-FX-2201GLF](https://wiki.adom.inc/adom/cr0402-fx-2201glf)**<br>Bourns | 1 | R6 | 2.2k | LED resistor | [Adom stock](https://wiki.adom.inc/adom/adom-basic-parts) |
| <a href="https://wiki.adom.inc/adom/in-s63btg"><img src="docs/parts/in-s63btg.png?v=9c03517e" width="64" alt="IN-S63BTG"></a><br>**[IN-S63BTG](https://wiki.adom.inc/adom/in-s63btg)**<br>Inolux | 1 | D1 | green LED | 5 V power-good indicator | [Adom stock](https://wiki.adom.inc/adom/adom-basic-parts) |
| <a href="https://wiki.adom.inc/adom/machinecontactmedium"><img src="docs/parts/machinecontactmedium.png?v=98d8c6d3" width="64" alt="MachineContactMedium"></a><br>**[MachineContactMedium](https://wiki.adom.inc/adom/machinecontactmedium)**<br>Adom | 7 | J1 to J7 | MachineContactMedium | molecule contact: VIN, GND, EN, VOUT, VMON, and a spare GND | [Adom stock](https://wiki.adom.inc/adom/adom-basic-parts) |
| <a href="https://wiki.adom.inc/adom/machinepinmediumshort"><img src="docs/parts/machinepinmediumshort.png?v=33dcf6f3" width="64" alt="MachinePinMediumShort"></a><br>**[MachinePinMediumShort](https://wiki.adom.inc/adom/machinepinmediumshort)**<br>Adom | 4 | MP1 to MP4 | MachinePinMediumShort | corner machine pin (GND) | [Adom stock](https://wiki.adom.inc/adom/adom-basic-parts) |
## Feature guides
| guide | what it covers |
|---|---|
| [The Adom tools](docs/tools.md) | Every Adom tool used on this board, what each one did, and a link to its page. |
| [Circuit design](docs/design.md) | The brief, why the TPS54202, and every calculation: inductor (15 uH vs Lmin), COUT, the 68 pF Cff, the stocked-value divider search, EN UVLO, bootstrap, losses. |
| [Simulation](docs/simulation.md) | ngspice loop gain across Cff, the switching transient at 9, 12 and 16 V, and the check against TI's PSpice model. |
| [Sourcing](docs/sourcing.md) | The BOM with Mouser part numbers, the 3rd party fab sourcing policy, and where every 3D model came from. |
| [Board](docs/board.md) | Molecule format, design rules, placement, routing, pours with the SW patch, DRC, copper and silkscreen. |
| [Thermal and current](docs/thermal-current.md) | Adom Fields current density (SW peak 50 A/mm2), where the heat goes, and the still-air budget. |
| [How the video was made](docs/process-video.md) | Capturing the footage while the board is built, the shots and scenes, and putting the video together. |
| [Probing before ordering](docs/probing.md) | The probing workcell's test plan, each test a copy of a SPICE run, the simulated scope captures, and the loops that sent the board back to layout for J7, TP6, TP7 and TP8. |
| [Build clips](docs/clips.md) | Watch the board being built in KiCad: placement, routing, pours, the analyses and the silkscreen. |
| [Fusion 360 build](fusion-360/README.md) | The same buck built by AI in Autodesk Fusion 360: every step with screenshots, the cost per Claude plan, and how the video was made. |
| [ECAS vs MLCC](ecas-capacitors/README.md) | Swapping the ceramics for polymer capacitors: measured DC-bias data, ten capacitor sets in SPICE, hot plug, rail impedance in Adom Fields, board size, cost, and the 47 pF Cff finding. |
## What is in this repo
| folder | contents |
|---|---|
| `design/` | `calcs.py` (every datasheet equation, run it to regenerate `calcs.json`) and `bom.csv` |
| `sim/` | the ngspice loop and switching models with their results and plots, and the TI PSpice comparison |
| `kicad/` | KiCad 10 project: schematic, board, design rules, the netlist the board was generated from, the generator scripts, project libraries and every 3D model |
| `aiflow/spec.json` | the layout constraints the board was built to: wide nets, Kelvin taps, loads, hot parts, pours and the thermal budget |
| `molecule/` | the molecule STEP (KiCad 10 export), the anchored GLB and the footprint and symbol JSON |
| `verification.json` | the verification log behind the badge at the top: the checks, and the SHA-256 of every file they cover |



















