# AI Flow run: claude-opus-5-5 on board-0

**finish ran with 5 open item(s); not cleared for fabrication** (2026-11-10T04:58:47Z, 980.6 min of AI time from the prompt). The open items are listed under the run's summary; finish again after any change.

Prompt at 2026-11-09T00:22:00Z (UTC). Flow: board. Every number here is from the run's append-only ledger (run.jsonl). AI time is the time the AI was working on a prompt: from the human's prompt to the AI's done, with any gap over 15 min where no command ran (unobserved, not proven idle) cut out.

## Sessions

One row per human prompt: the AI's time on it, unobserved gaps excluded by the heuristic, which may include external AI work.

| Session | Prompt at | Done at | AI time min | Unobserved gap min | What |
|---|---|---|---|---|---|
| 1 | 2026-11-09T00:22:00Z | 2026-11-09T06:54:54Z | 341.1 | 52 | the first prompt |
| 2 | 2026-11-09T06:54:54Z | (open) | 0.0 | 0 | follow-up (no prompt mark; say `prompt --text` next time) |
| 3 | 2026-11-09T08:10:41Z | (open) | 59.1 | 0 | follow-up (no prompt mark; say `prompt --text` next time) |
| 4 | 2026-11-09T14:42:08Z | (open) | 6.8 | 0 | follow-up (no prompt mark; say `prompt --text` next time) |
| 5 | 2026-11-09T15:29:58Z | (open) | 0.1 | 0 | follow-up (no prompt mark; say `prompt --text` next time) |
| 6 | 2026-11-09T17:22:57Z | (open) | 5.6 | 0 | follow-up (no prompt mark; say `prompt --text` next time) |
| 7 | 2026-11-09T17:46:18Z | (open) | 18.5 | 0 | follow-up (no prompt mark; say `prompt --text` next time) |
| 8 | 2026-11-09T19:50:33Z | (open) | 95.4 | 0 | follow-up (no prompt mark; say `prompt --text` next time) |
| 9 | 2026-11-09T21:59:30Z | (open) | 454.1 | 0 | follow-up (no prompt mark; say `prompt --text` next time) |
| **all** | | | **980.6** | | |

## Per step

AI time only, the idle cut out.

| Step | AI min | AI thinking min | Tool min | Turns | Visits | Returns | Longest think |
|---|---|---|---|---|---|---|---|
| intake | 7.0 | 6.8 | 0.1 | 5 | 0 | 0 | 5.8 min |
| placement | 42.0 | 18.1 | 24.0 | 80 | 9 | 6 | 5.0 min |
| routing | 153.3 | 25.5 | 127.8 | 69 | 13 | 1 | 7.0 min |
| pours | 57.8 | 27.5 | 30.3 | 108 | 13 | 4 | 9.5 min |
| current | 122.3 | 1.2 | 121.1 | 44 | 14 | 4 | 0.5 min |
| thermal | 13.2 | 2.1 | 11.1 | 34 | 14 | 0 | 0.9 min |
| capture | 0.0 | 0.0 | 0.0 | 1 | 0 | 0 | 0.0 min |
| finish | 8.7 | 1.0 | 7.8 | 20 | 12 | 0 | 0.4 min |
| 3d | 10.6 | 0.1 | 10.4 | 22 | 8 | 0 | 0.1 min |
| components | 1.4 | 0.1 | 1.2 | 5 | 2 | 0 | 0.1 min |
| design | 8.6 | 8.6 | 0.0 | 3 | 0 | 0 | 8.6 min |
| export | 364.2 | 15.2 | 349.0 | 70 | 9 | 0 | 4.2 min |
| fields | 109.3 | 0.3 | 109.0 | 21 | 9 | 2 | 0.2 min |
| libraries | 0.1 | 0.1 | 0.1 | 2 | 2 | 0 | 0.1 min |
| library | 2.4 | 2.4 | 0.0 | 4 | 0 | 0 | 2.4 min |
| models | 2.7 | 1.2 | 1.4 | 6 | 2 | 0 | 1.1 min |
| nets | 8.1 | 0.1 | 8.0 | 18 | 9 | 0 | 0.1 min |
| other | 0.4 | 0.0 | 0.4 | 7 | 0 | 0 | 0.0 min |
| outline | 1.1 | 0.1 | 1.0 | 10 | 5 | 1 | 0.1 min |
| parts | 3.1 | 1.8 | 1.3 | 5 | 0 | 0 | 1.5 min |
| project-page | 3.1 | 2.3 | 0.9 | 11 | 0 | 0 | 1.1 min |
| rules | 1.3 | 0.8 | 0.5 | 8 | 2 | 2 | 0.8 min |
| schematic | 14.6 | 13.8 | 0.8 | 4 | 1 | 1 | 8.6 min |
| silkscreen | 23.7 | 11.7 | 12.1 | 72 | 13 | 2 | 4.8 min |
| simulation | 13.6 | 13.6 | 0.0 | 4 | 0 | 0 | 12.8 min |
| sourcing | 4.5 | 4.5 | 0.0 | 7 | 0 | 0 | 4.5 min |
| test-plan | 1.5 | 1.3 | 0.2 | 7 | 2 | 0 | 1.3 min |
| thermal-vias | 1.8 | 0.0 | 1.8 | 14 | 6 | 1 | 0.0 min |
| **total** | **980.6** | **160.2** | **820.4** | | | | |

## Returns to earlier steps

- 2026-11-09T02:48:09Z back to **placement** (visit 2): router could not escape the STM32: matrix pins faced the board edge and decoupling caps boxed the chip in on all sides; turning U1 180 deg and moving caps to their supply pins
- 2026-11-09T03:20:47Z back to **placement** (visit 3): Freerouting left U1 pins 11 (COL1) and 39 (COL12) unrouted: C8/C9 blocked the right-side escape of pins 10-12; caps moved to open it
- 2026-11-09T03:31:31Z back to **schematic** (visit 1): STM32 matrix pins re-assigned by side so each column/row leaves the chip toward its keys; the first map forced COL0-2 across the chip and COL11-14 out the board-edge side, leaving pins unroutable
- 2026-11-09T04:01:34Z back to **placement** (visit 5): Fields: decoupling caps C3/C5 3.5-5 mm from their STM32 supply pins; power traces came out 0.2 mm because widths were only in the AI Flow spec, not KiCad netclasses
- 2026-11-09T04:45:19Z back to **current** (visit 3): 
- 2026-11-09T04:50:42Z back to **pours** (visit 3): Fields ground offset 15 mV under U1: add GND stitching vias between the pours
- 2026-11-09T05:03:14Z back to **pours** (visit 4): 
- 2026-11-09T05:24:53Z back to **outline** (visit 1): 
- 2026-11-09T05:49:41Z back to **pours** (visit 5): 
- 2026-11-09T06:17:02Z back to **rules** (visit 1): re-record this step's proof on the final board (run.json outcomes were cleared by an accidental start --force; board and spec unchanged)
- 2026-11-09T06:33:51Z back to **placement** (visit 6): re-record proofs after the rules revisit; board and spec unchanged
- 2026-11-09T06:37:26Z back to **fields** (visit 3): re-record walkthroughs after the proof re-run; board and spec unchanged
- 2026-11-09T08:10:42Z back to **placement** (visit 7): Aesthetic redesign requested: symmetric controller area around the centred USB-C (ESD below the connector, STM32 right, power block left)
- 2026-11-09T19:57:06Z back to **pours** (visit 10): 
- 2026-11-09T20:28:20Z back to **thermal-vias** (visit 4): 
- 2026-11-09T20:51:50Z back to **silkscreen** (visit 6): 
- 2026-11-09T20:59:19Z back to **silkscreen** (visit 7): 
- 2026-11-09T21:03:30Z back to **current** (visit 10): 
- 2026-11-09T21:07:42Z back to **current** (visit 11): 
- 2026-11-09T22:07:24Z back to **current** (visit 12): 
- 2026-11-10T04:11:01Z back to **rules** (visit 2): Rev B requested by the user: PCBWay bare board (hand-soldered), soldered MX switches instead of hotswap sockets, green mask, lead-free HASL
- 2026-11-10T04:14:50Z back to **placement** (visit 9): re-verify the placements with the rev B board open in KiCad (the first check ran with no editor open)
- 2026-11-10T04:43:03Z back to **fields** (visit 8): the Fields app was not serving during the first walkthrough; same solve, rerun the walkthrough
- 2026-11-10T05:00:22Z back to **routing** (visit 13): the GND pours were refilled and saved after the rev B matrix reroute; re-prove every step from routing on the final file

## Decisions along the way

- 2026-11-09T01:20:12Z clip-start:libraries-1
- 2026-11-09T01:20:18Z clip-start:models-1
- 2026-11-09T01:22:06Z recut: 1 clips re-cut (10x and action) with this binary's rules
- 2026-11-09T01:22:29Z clip-start:placement-1
- 2026-11-09T02:13:07Z clip-start:routing-1
- 2026-11-09T02:50:40Z clip-start:placement-2
- 2026-11-09T02:53:01Z clip-start:routing-2
- 2026-11-09T03:24:18Z clip-start:routing-3
- 2026-11-09T03:32:06Z clip-start:schematic-1
- 2026-11-09T03:53:42Z clip-start:thermal-vias-1
- 2026-11-09T03:53:49Z clip-start:pours-1
- 2026-11-09T03:56:06Z clip-start:current-1
- 2026-11-09T04:00:40Z clip-start:thermal-1
- 2026-11-09T04:01:42Z clip-start:placement-5
- 2026-11-09T04:03:59Z clip-start:routing-5
- 2026-11-09T04:06:48Z clip-start:routing-6
- 2026-11-09T04:14:32Z clip-start:routing-7
- 2026-11-09T04:22:18Z clip-start:routing-8
- 2026-11-09T04:39:10Z clip-start:pours-2
- 2026-11-09T04:40:34Z clip-start:current-2
- 2026-11-09T04:45:01Z clip-start:thermal-2
- 2026-11-09T04:45:24Z clip-start:current-3
- 2026-11-09T04:50:27Z clip-start:thermal-3
- 2026-11-09T04:50:46Z clip-start:pours-3
- 2026-11-09T04:55:38Z clip-start:current-4
- 2026-11-09T05:00:32Z clip-start:thermal-4
- 2026-11-09T05:03:29Z clip-start:pours-4
- 2026-11-09T05:04:23Z clip-start:current-5
- 2026-11-09T05:24:26Z clip-start:thermal-5
- 2026-11-09T05:24:59Z clip-start:outline-1
- 2026-11-09T05:38:22Z clip-start:nets-1
- 2026-11-09T05:39:09Z net GND: 145 items highlighted
- 2026-11-09T05:39:13Z net +3V3: 100 items highlighted
- 2026-11-09T05:39:17Z net VBUS: 35 items highlighted
- 2026-11-09T05:39:22Z net VBUS_IN: 18 items highlighted
- 2026-11-09T05:39:42Z clip-start:silkscreen-1
- 2026-11-09T05:50:31Z clip-start:pours-5
- 2026-11-09T05:51:25Z clip-start:current-6
- 2026-11-09T06:10:55Z clip-start:thermal-6
- 2026-11-09T06:11:03Z clip-start:silkscreen-2
- 2026-11-09T06:14:50Z clip-start:3d-1
- 2026-11-09T06:15:50Z clip-start:finish-1
- 2026-11-09T06:17:02Z clip-start:rules-1
- 2026-11-09T06:17:12Z clip-start:test-plan-1
- 2026-11-09T06:17:22Z clip-start:thermal-vias-2
- 2026-11-09T06:30:33Z clip-start:nets-2
- 2026-11-09T06:31:16Z net GND: 145 items highlighted
- 2026-11-09T06:31:21Z net +3V3: 100 items highlighted
- 2026-11-09T06:31:25Z net VBUS: 35 items highlighted
- 2026-11-09T06:31:29Z net VBUS_IN: 18 items highlighted
- 2026-11-09T06:31:43Z clip-start:3d-2
- 2026-11-09T06:32:37Z clip-start:finish-2
- 2026-11-09T06:33:52Z clip-start:placement-6
- 2026-11-09T06:34:18Z clip-start:routing-9
- 2026-11-09T06:34:58Z clip-start:thermal-vias-3
- 2026-11-09T06:35:06Z clip-start:pours-6
- 2026-11-09T06:35:56Z clip-start:outline-2
- 2026-11-09T06:36:02Z clip-start:current-7
- 2026-11-09T06:36:09Z clip-start:thermal-7
- 2026-11-09T06:36:16Z clip-start:silkscreen-3
- 2026-11-09T06:36:28Z clip-start:finish-3
- 2026-11-09T06:50:14Z clip-start:nets-3
- 2026-11-09T06:50:58Z net GND: 145 items highlighted
- 2026-11-09T06:51:03Z net +3V3: 100 items highlighted
- 2026-11-09T06:51:07Z net VBUS: 35 items highlighted
- 2026-11-09T06:51:11Z net VBUS_IN: 18 items highlighted
- 2026-11-09T06:51:23Z clip-start:3d-3
- 2026-11-09T06:52:15Z clip-start:finish-4
- 2026-11-09T06:53:02Z clip-start:export-1
- 2026-11-09T08:10:42Z clip-start:placement-7
- 2026-11-09T09:08:37Z clip-start:pours-7
- 2026-11-09T14:42:08Z clip guard: the pours clip ran 333 min, past its 15 min budget twice over; stopped by the guard
- 2026-11-09T17:47:44Z clip-start:pours-8
- 2026-11-09T17:59:51Z clip-start:pours-9
- 2026-11-09T19:50:33Z clip guard: the pours clip ran 110 min, past its 15 min budget twice over; stopped by the guard
- 2026-11-09T19:57:07Z clip-start:pours-10
- 2026-11-09T20:06:29Z clip-start:pours-11
- 2026-11-09T20:07:55Z clip-start:current-9
- 2026-11-09T20:24:06Z clip-start:thermal-9
- 2026-11-09T20:24:17Z clip-start:silkscreen-5
- 2026-11-09T20:29:13Z clip-start:thermal-vias-4
- 2026-11-09T20:29:26Z clip-start:outline-3
- 2026-11-09T20:43:13Z clip-start:nets-4
- 2026-11-09T20:44:05Z net GND: 121 items highlighted
- 2026-11-09T20:44:09Z net +3V3: 86 items highlighted
- 2026-11-09T20:44:14Z net VBUS: 32 items highlighted
- 2026-11-09T20:44:33Z clip-start:3d-4
- 2026-11-09T20:46:34Z clip-start:finish-5
- 2026-11-09T20:46:53Z pulled 2 clip(s) that had not reached the run
- 2026-11-09T20:48:13Z clip-start:export-2
- 2026-11-09T20:53:10Z pulled 2 clip(s) that had not reached the run
- 2026-11-09T20:54:00Z pulled 2 clip(s) that had not reached the run
- 2026-11-09T21:00:07Z pulled 2 clip(s) that had not reached the run
- 2026-11-09T21:01:24Z pulled 2 clip(s) that had not reached the run
- 2026-11-09T21:04:11Z pulled 2 clip(s) that had not reached the run
- 2026-11-09T21:05:00Z pulled 2 clip(s) that had not reached the run
- 2026-11-09T21:07:43Z clip-start:current-11
- 2026-11-09T21:07:52Z clip-start:thermal-11
- 2026-11-09T21:21:45Z clip-start:nets-5
- 2026-11-09T21:22:28Z net GND: 121 items highlighted
- 2026-11-09T21:22:32Z net +3V3: 86 items highlighted
- 2026-11-09T21:22:37Z net VBUS: 32 items highlighted
- 2026-11-09T21:22:53Z clip-start:silkscreen-9
- 2026-11-09T21:23:12Z clip-start:3d-5
- 2026-11-09T21:24:30Z clip-start:finish-9
- 2026-11-09T21:24:38Z clip-start:export-6
- 2026-11-09T21:25:14Z pulled 2 clip(s) that had not reached the run
- 2026-11-09T22:07:25Z clip-start:current-12
- 2026-11-09T22:23:21Z clip-start:thermal-12
- 2026-11-09T22:37:08Z clip-start:nets-6
- 2026-11-09T22:37:58Z net GND: 121 items highlighted
- 2026-11-09T22:38:02Z net +3V3: 86 items highlighted
- 2026-11-09T22:38:08Z net VBUS: 32 items highlighted
- 2026-11-09T22:38:27Z clip-start:silkscreen-10
- 2026-11-09T22:38:42Z clip-start:3d-6
- 2026-11-09T22:40:00Z clip-start:finish-10
- 2026-11-09T22:40:08Z clip-start:export-7
- 2026-11-09T22:40:48Z pulled 2 clip(s) that had not reached the run
- 2026-11-09T22:42:10Z artifact analysis-image for fields-6: Adom Fields current and heat screen on the final board: VBUS and GND at 0.5 A peak 40 A/mm2, +3V3 at 0.1 A 12 A/mm2, under 1 C rise in still air. The 'no TVS' tag on J2 is expected: ESD protection is on the USB daughterboard.
- 2026-11-09T22:42:48Z pulled 2 clip(s) that had not reached the run
- 2026-11-10T04:11:02Z clip-start:rules-2
- 2026-11-10T04:12:59Z clip-start:test-plan-2
- 2026-11-10T04:14:51Z clip-start:placement-9
- 2026-11-10T04:15:13Z clip-start:routing-12
- 2026-11-10T04:15:44Z clip-start:thermal-vias-5
- 2026-11-10T04:16:07Z clip-start:pours-12
- 2026-11-10T04:17:26Z clip-start:outline-4
- 2026-11-10T04:17:42Z clip-start:current-13
- 2026-11-10T04:36:43Z clip-start:thermal-13
- 2026-11-10T04:39:24Z clip-start:nets-7
- 2026-11-10T04:39:31Z net GND: 121 items highlighted
- 2026-11-10T04:39:36Z net +3V3: 86 items highlighted
- 2026-11-10T04:39:40Z net VBUS: 32 items highlighted
- 2026-11-10T04:39:52Z clip-start:silkscreen-11
- 2026-11-10T04:56:17Z net GND: 121 items highlighted
- 2026-11-10T04:56:21Z net +3V3: 86 items highlighted
- 2026-11-10T04:56:25Z net VBUS: 32 items highlighted
- 2026-11-10T04:58:27Z pulled 2 clip(s) that had not reached the run
- 2026-11-10T05:31:58Z net GND: 121 items highlighted
- 2026-11-10T05:32:02Z net +3V3: 86 items highlighted
- 2026-11-10T05:32:06Z net VBUS: 32 items highlighted

## Where the board stands

- gate: 0 new DRC errors, 0 unconnected, null inherited
- landed live: 0 of 0 route entries
- pours (landed): 0 groups, failed []
- copper kept (mm2 per layer): {"B.Cu":23387.02,"F.Cu":24947.91}
- analyze-current: pass
- analyze-thermal: pass

## The steps on camera

One clip per step visit, sped up 10x, with the editor at the start and the end of the visit. A caption above every clip and screenshot says what it shows.

### libraries

What this step does: Assemble and validate the reviewed symbols, footprints and selected model variants in the chosen EDA before placement.

**Clip: libraries, the PCB editor from 2026-11-09T01:20:12Z to 2026-11-09T01:20:17Z. Motion only: 0.1 min of real time, 1 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/libraries-1.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the libraries clip, what the camera saw.**

![nine frames of libraries](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/libraries-1-sheet.png)

**Screenshot: the board when libraries began.**

![the board when libraries began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-libraries-1-start.png)

**Screenshot: the board when libraries ended.**

![the board when libraries ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-libraries-1-end.png)

### models

What this step does: Check native board model resolution and inspect the selected library variants in the chosen EDA; use the component register for unresolved assets.

**Clip: models, the PCB editor from 2026-11-09T01:20:18Z to 2026-11-09T01:22:20Z. Motion only: 2.0 min of real time, 0 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/models-1.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the models clip, what the camera saw.**

![nine frames of models](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/models-1-sheet.png)

**Screenshot: the board when models began.**

![the board when models began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-models-1-start.png)

**Screenshot: the board when models ended.**

![the board when models ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-models-1-end.png)

### placement

What this step does: place the parts for routability, current and heat; the binary packs, checks courtyards and lands moves; reserve visible space for connector labels and the two-sided service silkscreen; the switch-node check refuses switch copper under another part or a switch loop longer than the spec allows, and sends the AI back here

**Clip: placement, the PCB editor from 2026-11-09T01:22:29Z to 2026-11-09T02:10:25Z. Motion only: 47.3 min of real time, 0 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/placement-1.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the placement clip, what the camera saw.**

![nine frames of placement](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/placement-1-sheet.png)

**Screenshot: the board when placement began.**

![the board when placement began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-placement-1-start.png)

### routing

What this step does: route to 100 percent with the spec's rules, gate with KiCad's DRC, land as undo steps; the AI takes it with take route=ai

**Clip: routing, the PCB editor from 2026-11-09T02:13:07Z to 2026-11-09T02:48:36Z. Motion only: 35.0 min of real time, 30 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/routing-1.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the routing clip, what the camera saw.**

![nine frames of routing](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/routing-1-sheet.png)

**Screenshot: the board when routing began.**

![the board when routing began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-routing-1-start.png)

**Screenshot: the board when routing ended.**

![the board when routing ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-routing-1-end.png)

### placement, visit 2 (rework)

What this step does: place the parts for routability, current and heat; the binary packs, checks courtyards and lands moves; reserve visible space for connector labels and the two-sided service silkscreen; the switch-node check refuses switch copper under another part or a switch loop longer than the spec allows, and sends the AI back here

Why the AI came back here: router could not escape the STM32: matrix pins faced the board edge and decoupling caps boxed the chip in on all sides; turning U1 180 deg and moving caps to their supply pins

**Clip: placement, visit 2 (rework), the PCB editor from 2026-11-09T02:50:40Z to 2026-11-09T02:52:51Z. Motion only: 2.2 min of real time, 0 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/placement-2.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the placement, visit 2 (rework) clip, what the camera saw.**

![nine frames of placement, visit 2 (rework)](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/placement-2-sheet.png)

**Screenshot: the board when placement, visit 2 (rework) began.**

![the board when placement, visit 2 (rework) began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-placement-2-start.png)

### routing, visit 2

What this step does: route to 100 percent with the spec's rules, gate with KiCad's DRC, land as undo steps; the AI takes it with take route=ai

**Clip: routing, visit 2, the PCB editor from 2026-11-09T02:53:01Z to 2026-11-09T03:21:11Z. Motion only: 27.8 min of real time, 24 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/routing-2.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the routing, visit 2 clip, what the camera saw.**

![nine frames of routing, visit 2](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/routing-2-sheet.png)

**Screenshot: the board when routing, visit 2 began.**

![the board when routing, visit 2 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-routing-2-start.png)

### routing, visit 3

What this step does: route to 100 percent with the spec's rules, gate with KiCad's DRC, land as undo steps; the AI takes it with take route=ai

**Clip: routing, visit 3, the PCB editor from 2026-11-09T03:24:17Z to 2026-11-09T03:31:37Z. Motion only: 7.3 min of real time, 0 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/routing-3.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the routing, visit 3 clip, what the camera saw.**

![nine frames of routing, visit 3](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/routing-3-sheet.png)

**Screenshot: the board when routing, visit 3 began.**

![the board when routing, visit 3 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-routing-3-start.png)

### schematic

What this step does: 

Why the AI came back here: STM32 matrix pins re-assigned by side so each column/row leaves the chip toward its keys; the first map forced COL0-2 across the chip and COL11-14 out the board-edge side, leaving pins unroutable

**Clip: schematic, the PCB editor from 2026-11-09T03:32:06Z to 2026-11-09T03:33:53Z. Motion only: 1.8 min of real time, 76 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/schematic-1.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the schematic clip, what the camera saw.**

![nine frames of schematic](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/schematic-1-sheet.png)

**Screenshot: the board when schematic began.**

![the board when schematic began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-schematic-1-start.png)

**Screenshot: the board when schematic ended.**

![the board when schematic ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-schematic-1-end.png)

### thermal-vias

What this step does: Heatsink vias where the heat is: for every part that dissipates real power (the regulator, the inductor, the catch diode, the FETs), an array of vias in its thermal pad or the copper it dumps heat into, stitched to the ground or the plane on the other side, sized and counted from its dissipation; the AI reviews the plan and the binary lands it.

**Clip: thermal-vias, the PCB editor from 2026-11-09T03:53:42Z to 2026-11-09T03:53:45Z. Motion only: 0.1 min of real time, 2 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/thermal-vias-1.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the thermal-vias clip, what the camera saw.**

![nine frames of thermal-vias](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/thermal-vias-1-sheet.png)

**Screenshot: the board when thermal-vias began.**

![the board when thermal-vias began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-thermal-vias-1-start.png)

**Screenshot: the board when thermal-vias ended.**

![the board when thermal-vias ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-thermal-vias-1-end.png)

### pours

What this step does: pour every net the spec names, keepouts along Kelvin taps, thermal and stitching vias, land, measure the copper kept

**Clip: pours, the PCB editor from 2026-11-09T03:53:49Z to 2026-11-09T03:55:56Z. Motion only: 2.1 min of real time, 16 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/pours-1.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the pours clip, what the camera saw.**

![nine frames of pours](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/pours-1-sheet.png)

**Screenshot: the board when pours began.**

![the board when pours began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-pours-1-start.png)

**Screenshot: the board when pours ended.**

![the board when pours ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-pours-1-end.png)

### current

What this step does: IPC-2221 on every loaded net, pour and via capacity, the same-layer rule; then the AI's own current density drawing and a walkthrough of the pours it judged

**Clip: current, the PCB editor from 2026-11-09T03:56:06Z to 2026-11-09T04:00:22Z. Motion only: 4.2 min of real time, 26 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/current-1.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the current clip, what the camera saw.**

![nine frames of current](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/current-1-sheet.png)

**Screenshot: the board when current began.**

![the board when current began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-current-1-start.png)

**Screenshot: the board when current ended.**

![the board when current ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-current-1-end.png)

### thermal

What this step does: copper and vias at every hot tab against the rise budget; then the AI's own temperature rise drawing and a walkthrough of the pours it judged

**Clip: thermal, the PCB editor from 2026-11-09T04:00:40Z to 2026-11-09T04:01:35Z. Motion only: 0.9 min of real time, 16 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/thermal-1.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the thermal clip, what the camera saw.**

![nine frames of thermal](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/thermal-1-sheet.png)

**Screenshot: the board when thermal began.**

![the board when thermal began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-thermal-1-start.png)

**Screenshot: the board when thermal ended.**

![the board when thermal ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-thermal-1-end.png)

### placement, visit 5 (rework)

What this step does: place the parts for routability, current and heat; the binary packs, checks courtyards and lands moves; reserve visible space for connector labels and the two-sided service silkscreen; the switch-node check refuses switch copper under another part or a switch loop longer than the spec allows, and sends the AI back here

Why the AI came back here: Fields: decoupling caps C3/C5 3.5-5 mm from their STM32 supply pins; power traces came out 0.2 mm because widths were only in the AI Flow spec, not KiCad netclasses

**Clip: placement, visit 5 (rework), the PCB editor from 2026-11-09T04:01:42Z to 2026-11-09T04:03:48Z. Motion only: 2.1 min of real time, 15 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/placement-5.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the placement, visit 5 (rework) clip, what the camera saw.**

![nine frames of placement, visit 5 (rework)](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/placement-5-sheet.png)

**Screenshot: the board when placement, visit 5 (rework) began.**

![the board when placement, visit 5 (rework) began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-placement-5-start.png)

**Screenshot: the board when placement, visit 5 (rework) ended.**

![the board when placement, visit 5 (rework) ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-placement-5-end.png)

### routing, visit 5

What this step does: route to 100 percent with the spec's rules, gate with KiCad's DRC, land as undo steps; the AI takes it with take route=ai

**Clip: routing, visit 5, the PCB editor from 2026-11-09T04:03:58Z to 2026-11-09T04:06:35Z. Motion only: 2.6 min of real time, 12 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/routing-5.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the routing, visit 5 clip, what the camera saw.**

![nine frames of routing, visit 5](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/routing-5-sheet.png)

**Screenshot: the board when routing, visit 5 began.**

![the board when routing, visit 5 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-routing-5-start.png)

### routing, visit 6

What this step does: route to 100 percent with the spec's rules, gate with KiCad's DRC, land as undo steps; the AI takes it with take route=ai

**Clip: routing, visit 6, the PCB editor from 2026-11-09T04:06:48Z to 2026-11-09T04:14:03Z. Motion only: 7.2 min of real time, 3 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/routing-6.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the routing, visit 6 clip, what the camera saw.**

![nine frames of routing, visit 6](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/routing-6-sheet.png)

**Screenshot: the board when routing, visit 6 began.**

![the board when routing, visit 6 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-routing-6-start.png)

### routing, visit 7

What this step does: route to 100 percent with the spec's rules, gate with KiCad's DRC, land as undo steps; the AI takes it with take route=ai

**Clip: routing, visit 7, the PCB editor from 2026-11-09T04:14:32Z to 2026-11-09T04:21:49Z. Motion only: 7.2 min of real time, 2 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/routing-7.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the routing, visit 7 clip, what the camera saw.**

![nine frames of routing, visit 7](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/routing-7-sheet.png)

**Screenshot: the board when routing, visit 7 began.**

![the board when routing, visit 7 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-routing-7-start.png)

### routing, visit 8

What this step does: route to 100 percent with the spec's rules, gate with KiCad's DRC, land as undo steps; the AI takes it with take route=ai

**Clip: routing, visit 8, the PCB editor from 2026-11-09T04:22:18Z to 2026-11-09T04:38:13Z. Motion only: 15.7 min of real time, 0 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/routing-8.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the routing, visit 8 clip, what the camera saw.**

![nine frames of routing, visit 8](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/routing-8-sheet.png)

**Screenshot: the board when routing, visit 8 began.**

![the board when routing, visit 8 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-routing-8-start.png)

### pours, visit 2

What this step does: pour every net the spec names, keepouts along Kelvin taps, thermal and stitching vias, land, measure the copper kept

**Clip: pours, visit 2, the PCB editor from 2026-11-09T04:39:10Z to 2026-11-09T04:40:26Z. Motion only: 1.2 min of real time, 20 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/pours-2.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the pours, visit 2 clip, what the camera saw.**

![nine frames of pours, visit 2](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/pours-2-sheet.png)

**Screenshot: the board when pours, visit 2 began.**

![the board when pours, visit 2 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-pours-2-start.png)

**Screenshot: the board when pours, visit 2 ended.**

![the board when pours, visit 2 ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-pours-2-end.png)

### current, visit 2

What this step does: IPC-2221 on every loaded net, pour and via capacity, the same-layer rule; then the AI's own current density drawing and a walkthrough of the pours it judged

**Clip: current, visit 2, the PCB editor from 2026-11-09T04:40:34Z to 2026-11-09T04:44:41Z. Motion only: 4.1 min of real time, 93 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/current-2.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the current, visit 2 clip, what the camera saw.**

![nine frames of current, visit 2](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/current-2-sheet.png)

**Screenshot: the board when current, visit 2 began.**

![the board when current, visit 2 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-current-2-start.png)

**Screenshot: the board when current, visit 2 ended.**

![the board when current, visit 2 ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-current-2-end.png)

### thermal, visit 2

What this step does: copper and vias at every hot tab against the rise budget; then the AI's own temperature rise drawing and a walkthrough of the pours it judged

**Clip: thermal, visit 2, the PCB editor from 2026-11-09T04:45:01Z to 2026-11-09T04:45:20Z. Motion only: 0.3 min of real time, 6 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/thermal-2.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the thermal, visit 2 clip, what the camera saw.**

![nine frames of thermal, visit 2](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/thermal-2-sheet.png)

**Screenshot: the board when thermal, visit 2 began.**

![the board when thermal, visit 2 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-thermal-2-start.png)

**Screenshot: the board when thermal, visit 2 ended.**

![the board when thermal, visit 2 ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-thermal-2-end.png)

### current, visit 3

What this step does: IPC-2221 on every loaded net, pour and via capacity, the same-layer rule; then the AI's own current density drawing and a walkthrough of the pours it judged

**Clip: current, visit 3, the PCB editor from 2026-11-09T04:45:24Z to 2026-11-09T04:50:04Z. Motion only: 4.6 min of real time, 81 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/current-3.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the current, visit 3 clip, what the camera saw.**

![nine frames of current, visit 3](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/current-3-sheet.png)

**Screenshot: the board when current, visit 3 began.**

![the board when current, visit 3 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-current-3-start.png)

**Screenshot: the board when current, visit 3 ended.**

![the board when current, visit 3 ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-current-3-end.png)

### thermal, visit 3

What this step does: copper and vias at every hot tab against the rise budget; then the AI's own temperature rise drawing and a walkthrough of the pours it judged

**Clip: thermal, visit 3, the PCB editor from 2026-11-09T04:50:27Z to 2026-11-09T04:50:43Z. Motion only: 0.3 min of real time, 1 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/thermal-3.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the thermal, visit 3 clip, what the camera saw.**

![nine frames of thermal, visit 3](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/thermal-3-sheet.png)

**Screenshot: the board when thermal, visit 3 began.**

![the board when thermal, visit 3 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-thermal-3-start.png)

**Screenshot: the board when thermal, visit 3 ended.**

![the board when thermal, visit 3 ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-thermal-3-end.png)

### pours, visit 3 (rework)

What this step does: pour every net the spec names, keepouts along Kelvin taps, thermal and stitching vias, land, measure the copper kept

Why the AI came back here: Fields ground offset 15 mV under U1: add GND stitching vias between the pours

**Clip: pours, visit 3 (rework), the PCB editor from 2026-11-09T04:50:46Z to 2026-11-09T04:55:18Z. Motion only: 4.5 min of real time, 49 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/pours-3.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the pours, visit 3 (rework) clip, what the camera saw.**

![nine frames of pours, visit 3 (rework)](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/pours-3-sheet.png)

**Screenshot: the board when pours, visit 3 (rework) began.**

![the board when pours, visit 3 (rework) began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-pours-3-start.png)

**Screenshot: the board when pours, visit 3 (rework) ended.**

![the board when pours, visit 3 (rework) ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-pours-3-end.png)

### current, visit 4 (rework)

What this step does: IPC-2221 on every loaded net, pour and via capacity, the same-layer rule; then the AI's own current density drawing and a walkthrough of the pours it judged

Why the AI came back here: re-solve after GND stitching vias

**Clip: current, visit 4 (rework), the PCB editor from 2026-11-09T04:55:38Z to 2026-11-09T05:00:09Z. Motion only: 4.5 min of real time, 78 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/current-4.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the current, visit 4 (rework) clip, what the camera saw.**

![nine frames of current, visit 4 (rework)](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/current-4-sheet.png)

**Screenshot: the board when current, visit 4 (rework) began.**

![the board when current, visit 4 (rework) began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-current-4-start.png)

**Screenshot: the board when current, visit 4 (rework) ended.**

![the board when current, visit 4 (rework) ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-current-4-end.png)

### thermal, visit 4

What this step does: copper and vias at every hot tab against the rise budget; then the AI's own temperature rise drawing and a walkthrough of the pours it judged

**Clip: thermal, visit 4, the PCB editor from 2026-11-09T05:00:32Z to 2026-11-09T05:03:17Z. Motion only: 2.7 min of real time, 12 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/thermal-4.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the thermal, visit 4 clip, what the camera saw.**

![nine frames of thermal, visit 4](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/thermal-4-sheet.png)

**Screenshot: the board when thermal, visit 4 began.**

![the board when thermal, visit 4 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-thermal-4-start.png)

### pours, visit 4

What this step does: pour every net the spec names, keepouts along Kelvin taps, thermal and stitching vias, land, measure the copper kept

**Clip: pours, visit 4, the PCB editor from 2026-11-09T05:03:29Z to 2026-11-09T05:04:17Z. Motion only: 0.8 min of real time, 19 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/pours-4.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the pours, visit 4 clip, what the camera saw.**

![nine frames of pours, visit 4](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/pours-4-sheet.png)

**Screenshot: the board when pours, visit 4 began.**

![the board when pours, visit 4 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-pours-4-start.png)

**Screenshot: the board when pours, visit 4 ended.**

![the board when pours, visit 4 ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-pours-4-end.png)

### current, visit 5

What this step does: IPC-2221 on every loaded net, pour and via capacity, the same-layer rule; then the AI's own current density drawing and a walkthrough of the pours it judged

**Clip: current, visit 5, the PCB editor from 2026-11-09T05:04:23Z to 2026-11-09T05:23:07Z. Motion only: 18.6 min of real time, 294 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/current-5.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the current, visit 5 clip, what the camera saw.**

![nine frames of current, visit 5](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/current-5-sheet.png)

**Screenshot: the board when current, visit 5 began.**

![the board when current, visit 5 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-current-5-start.png)

**Screenshot: the board when current, visit 5 ended.**

![the board when current, visit 5 ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-current-5-end.png)

### thermal, visit 5

What this step does: copper and vias at every hot tab against the rise budget; then the AI's own temperature rise drawing and a walkthrough of the pours it judged

**Clip: thermal, visit 5, the PCB editor from 2026-11-09T05:24:26Z to 2026-11-09T05:24:54Z. Motion only: 0.5 min of real time, 11 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/thermal-5.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the thermal, visit 5 clip, what the camera saw.**

![nine frames of thermal, visit 5](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/thermal-5-sheet.png)

**Screenshot: the board when thermal, visit 5 began.**

![the board when thermal, visit 5 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-thermal-5-start.png)

**Screenshot: the board when thermal, visit 5 ended.**

![the board when thermal, visit 5 ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-thermal-5-end.png)

### outline

What this step does: Round the board's corners: every sharp outline corner becomes a radius (1.0 mm by default, spec outline.cornerRadius), so the board is kind to hands, panels and the fab's router.

**Clip: outline, the PCB editor from 2026-11-09T05:24:59Z to 2026-11-09T05:25:08Z. Motion only: 0.2 min of real time, 3 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/outline-1.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the outline clip, what the camera saw.**

![nine frames of outline](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/outline-1-sheet.png)

**Screenshot: the board when outline began.**

![the board when outline began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-outline-1-start.png)

**Screenshot: the board when outline ended.**

![the board when outline ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-outline-1-end.png)

### fields

What this step does: the fields on the board: adom-fields solves the current density of every loaded net, the heat flow in each copper layer with the vias, and the temperature over the board; the AI reads the issues and walks the board in the app on camera

**Clip: fields, the PCB editor from 2026-11-09T05:25:27Z to 2026-11-09T05:36:08Z. Motion only: 10.4 min of real time, 439 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/fields-1.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the fields clip, what the camera saw.**

![nine frames of fields](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/fields-1-sheet.png)

### nets

What this step does: the copper pour walkthrough: every poured net (and every loaded, wide or Kelvin net) highlighted on its own in turn, the board framed, so the viewer sees where each net's copper is; the AI names each one

**Clip: nets, the PCB editor from 2026-11-09T05:38:22Z to 2026-11-09T05:39:35Z. Motion only: 1.2 min of real time, 5 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/nets-1.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the nets clip, what the camera saw.**

![nine frames of nets](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/nets-1-sheet.png)

**Screenshot: the board when nets began.**

![the board when nets began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-nets-1-start.png)

**Screenshot: the board when nets ended.**

![the board when nets ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-nets-1-end.png)

### silkscreen

What this step does: Make both faces useful in real service: references and values, verified connector and machine-contact pinouts, polarity, board identity and bring-up labels; review native plots and assembled visibility. Offer the optional shared silkscreen dashboard: real solver events, candidate reasons, live/replay separation, fitted-model inspection and separately recorded detailed/5s replays. Audit every fitted body and every via/hole across the whole board, both faces, with coverage counts. Missing Fab geometry is not free space; native DRC does not establish fitted visibility. Keep unresolved labels explicit and do not apply an incomplete layout. Native geometry/edit/undo/refresh belongs to the EDA bridge.

**Clip: silkscreen, the PCB editor from 2026-11-09T05:39:42Z to 2026-11-09T05:49:48Z. Motion only: 10.0 min of real time, 124 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/silkscreen-1.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the silkscreen clip, what the camera saw.**

![nine frames of silkscreen](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/silkscreen-1-sheet.png)

**Screenshot: the board when silkscreen began.**

![the board when silkscreen began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-silkscreen-1-start.png)

### pours, visit 5

What this step does: pour every net the spec names, keepouts along Kelvin taps, thermal and stitching vias, land, measure the copper kept

**Clip: pours, visit 5, the PCB editor from 2026-11-09T05:50:31Z to 2026-11-09T05:51:20Z. Motion only: 0.8 min of real time, 4 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/pours-5.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the pours, visit 5 clip, what the camera saw.**

![nine frames of pours, visit 5](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/pours-5-sheet.png)

**Screenshot: the board when pours, visit 5 began.**

![the board when pours, visit 5 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-pours-5-start.png)

**Screenshot: the board when pours, visit 5 ended.**

![the board when pours, visit 5 ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-pours-5-end.png)

### current, visit 6

What this step does: IPC-2221 on every loaded net, pour and via capacity, the same-layer rule; then the AI's own current density drawing and a walkthrough of the pours it judged

**Clip: current, visit 6, the PCB editor from 2026-11-09T05:51:25Z to 2026-11-09T06:09:49Z. Motion only: 18.2 min of real time, 66 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/current-6.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the current, visit 6 clip, what the camera saw.**

![nine frames of current, visit 6](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/current-6-sheet.png)

**Screenshot: the board when current, visit 6 began.**

![the board when current, visit 6 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-current-6-start.png)

**Screenshot: the board when current, visit 6 ended.**

![the board when current, visit 6 ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-current-6-end.png)

### thermal, visit 6

What this step does: copper and vias at every hot tab against the rise budget; then the AI's own temperature rise drawing and a walkthrough of the pours it judged

**Clip: thermal, visit 6, the PCB editor from 2026-11-09T06:10:55Z to 2026-11-09T06:11:00Z. Motion only: 0.1 min of real time, 2 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/thermal-6.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the thermal, visit 6 clip, what the camera saw.**

![nine frames of thermal, visit 6](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/thermal-6-sheet.png)

**Screenshot: the board when thermal, visit 6 began.**

![the board when thermal, visit 6 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-thermal-6-start.png)

**Screenshot: the board when thermal, visit 6 ended.**

![the board when thermal, visit 6 ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-thermal-6-end.png)

### silkscreen, visit 2

What this step does: Make both faces useful in real service: references and values, verified connector and machine-contact pinouts, polarity, board identity and bring-up labels; review native plots and assembled visibility. Offer the optional shared silkscreen dashboard: real solver events, candidate reasons, live/replay separation, fitted-model inspection and separately recorded detailed/5s replays. Audit every fitted body and every via/hole across the whole board, both faces, with coverage counts. Missing Fab geometry is not free space; native DRC does not establish fitted visibility. Keep unresolved labels explicit and do not apply an incomplete layout. Native geometry/edit/undo/refresh belongs to the EDA bridge.

**Clip: silkscreen, visit 2, the PCB editor from 2026-11-09T06:11:03Z to 2026-11-09T06:14:33Z. Motion only: 3.5 min of real time, 56 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/silkscreen-2.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the silkscreen, visit 2 clip, what the camera saw.**

![nine frames of silkscreen, visit 2](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/silkscreen-2-sheet.png)

**Screenshot: the board when silkscreen, visit 2 began.**

![the board when silkscreen, visit 2 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-silkscreen-2-start.png)

**Screenshot: the board when silkscreen, visit 2 ended.**

![the board when silkscreen, visit 2 ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-silkscreen-2-end.png)

### 3d

What this step does: the 3D walkthrough: the viewer opened from the editor, then fit, top, tilt, orbit, zoom in, swing, front, bottom, flip, top, fit, all by menu command, no mouse

**Clip: 3d, the PCB editor from 2026-11-09T06:15:10Z to 2026-11-09T06:15:35Z. Motion only: 0.4 min of real time, 9 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/3d-1.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the 3d clip, what the camera saw.**

![nine frames of 3d](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/3d-1-sheet.png)

**Screenshot: the board when 3d began.**

![the board when 3d began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-3d-1-start.png)

### finish

What this step does: finish refuses until everything is true; the AI cuts the video and delivers

**Clip: finish, the PCB editor from 2026-11-09T06:15:50Z to 2026-11-09T06:16:36Z. Motion only: 0.8 min of real time, 17 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/finish-1.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the finish clip, what the camera saw.**

![nine frames of finish](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/finish-1-sheet.png)

**Screenshot: the board when finish began.**

![the board when finish began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-finish-1-start.png)

### rules

What this step does: Choose the fab and load its design rules before anything is drawn: the AI asks the human which fab builds the board (3rdPartyFab by default, JLCPCB on request) and loads that fab's rule profile into the EDA (KiCad .kicad_dru, Fusion DRC rules), so every later step designs to the process that will build it.

Why the AI came back here: re-record this step's proof on the final board (run.json outcomes were cleared by an accidental start --force; board and spec unchanged)

**Clip: rules, the PCB editor from 2026-11-09T06:17:02Z to 2026-11-09T06:17:07Z. Motion only: 0.1 min of real time, 4 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/rules-1.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the rules clip, what the camera saw.**

![nine frames of rules](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/rules-1-sheet.png)

**Screenshot: the board when rules began.**

![the board when rules began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-rules-1-start.png)

**Screenshot: the board when rules ended.**

![the board when rules ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-rules-1-end.png)

### test-plan

What this step does: Think through how this board will be tested once it is built and on the probing workcell: the measurements a careful engineer would take (rails, switch node, feedback, ripple, enable, LEDs), the net each one needs, and a probe spot for every one. The binary checks each planned measurement has a probe-able spot (a 0.5 mm round test point or an exposed pad the pogo tip can land on, within 50 mm of a ground machine contact, not under a part body) and adds a test point to the netlist for every gap.

**Clip: test-plan, the PCB editor from 2026-11-09T06:17:12Z to 2026-11-09T06:17:17Z. Motion only: 0.1 min of real time, 4 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/test-plan-1.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the test-plan clip, what the camera saw.**

![nine frames of test-plan](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/test-plan-1-sheet.png)

**Screenshot: the board when test-plan began.**

![the board when test-plan began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-test-plan-1-start.png)

**Screenshot: the board when test-plan ended.**

![the board when test-plan ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-test-plan-1-end.png)

### thermal-vias, visit 2

What this step does: Heatsink vias where the heat is: for every part that dissipates real power (the regulator, the inductor, the catch diode, the FETs), an array of vias in its thermal pad or the copper it dumps heat into, stitched to the ground or the plane on the other side, sized and counted from its dissipation; the AI reviews the plan and the binary lands it.

**Clip: thermal-vias, visit 2, the PCB editor from 2026-11-09T06:17:22Z to 2026-11-09T06:17:28Z. Motion only: 0.1 min of real time, 2 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/thermal-vias-2.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the thermal-vias, visit 2 clip, what the camera saw.**

![nine frames of thermal-vias, visit 2](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/thermal-vias-2-sheet.png)

**Screenshot: the board when thermal-vias, visit 2 began.**

![the board when thermal-vias, visit 2 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-thermal-vias-2-start.png)

**Screenshot: the board when thermal-vias, visit 2 ended.**

![the board when thermal-vias, visit 2 ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-thermal-vias-2-end.png)

### fields, visit 2

What this step does: the fields on the board: adom-fields solves the current density of every loaded net, the heat flow in each copper layer with the vias, and the temperature over the board; the AI reads the issues and walks the board in the app on camera

**Clip: fields, visit 2, the PCB editor from 2026-11-09T06:17:49Z to 2026-11-09T06:28:34Z. Motion only: 10.4 min of real time, 446 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/fields-2.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the fields, visit 2 clip, what the camera saw.**

![nine frames of fields, visit 2](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/fields-2-sheet.png)

### nets, visit 2

What this step does: the copper pour walkthrough: every poured net (and every loaded, wide or Kelvin net) highlighted on its own in turn, the board framed, so the viewer sees where each net's copper is; the AI names each one

**Clip: nets, visit 2, the PCB editor from 2026-11-09T06:30:33Z to 2026-11-09T06:31:35Z. Motion only: 1.0 min of real time, 19 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/nets-2.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the nets, visit 2 clip, what the camera saw.**

![nine frames of nets, visit 2](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/nets-2-sheet.png)

**Screenshot: the board when nets, visit 2 began.**

![the board when nets, visit 2 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-nets-2-start.png)

**Screenshot: the board when nets, visit 2 ended.**

![the board when nets, visit 2 ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-nets-2-end.png)

### 3d, visit 2

What this step does: the 3D walkthrough: the viewer opened from the editor, then fit, top, tilt, orbit, zoom in, swing, front, bottom, flip, top, fit, all by menu command, no mouse

**Clip: 3d, visit 2, the PCB editor from 2026-11-09T06:32:03Z to 2026-11-09T06:32:28Z. Motion only: 0.4 min of real time, 10 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/3d-2.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the 3d, visit 2 clip, what the camera saw.**

![nine frames of 3d, visit 2](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/3d-2-sheet.png)

**Screenshot: the board when 3d, visit 2 began.**

![the board when 3d, visit 2 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-3d-2-start.png)

### finish, visit 2

What this step does: finish refuses until everything is true; the AI cuts the video and delivers

**Clip: finish, visit 2, the PCB editor from 2026-11-09T06:32:37Z to 2026-11-09T06:33:21Z. Motion only: 0.7 min of real time, 0 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/finish-2.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the finish, visit 2 clip, what the camera saw.**

![nine frames of finish, visit 2](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/finish-2-sheet.png)

**Screenshot: the board when finish, visit 2 began.**

![the board when finish, visit 2 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-finish-2-start.png)

### placement, visit 6 (rework)

What this step does: place the parts for routability, current and heat; the binary packs, checks courtyards and lands moves; reserve visible space for connector labels and the two-sided service silkscreen; the switch-node check refuses switch copper under another part or a switch loop longer than the spec allows, and sends the AI back here

Why the AI came back here: re-record proofs after the rules revisit; board and spec unchanged

**Clip: placement, visit 6 (rework), the PCB editor from 2026-11-09T06:33:52Z to 2026-11-09T06:34:13Z. Motion only: 0.4 min of real time, 0 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/placement-6.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the placement, visit 6 (rework) clip, what the camera saw.**

![nine frames of placement, visit 6 (rework)](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/placement-6-sheet.png)

**Screenshot: the board when placement, visit 6 (rework) began.**

![the board when placement, visit 6 (rework) began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-placement-6-start.png)

**Screenshot: the board when placement, visit 6 (rework) ended.**

![the board when placement, visit 6 (rework) ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-placement-6-end.png)

### routing, visit 9

What this step does: route to 100 percent with the spec's rules, gate with KiCad's DRC, land as undo steps; the AI takes it with take route=ai

**Clip: routing, visit 9, the PCB editor from 2026-11-09T06:34:18Z to 2026-11-09T06:34:53Z. Motion only: 0.6 min of real time, 3 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/routing-9.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the routing, visit 9 clip, what the camera saw.**

![nine frames of routing, visit 9](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/routing-9-sheet.png)

**Screenshot: the board when routing, visit 9 began.**

![the board when routing, visit 9 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-routing-9-start.png)

**Screenshot: the board when routing, visit 9 ended.**

![the board when routing, visit 9 ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-routing-9-end.png)

### thermal-vias, visit 3

What this step does: Heatsink vias where the heat is: for every part that dissipates real power (the regulator, the inductor, the catch diode, the FETs), an array of vias in its thermal pad or the copper it dumps heat into, stitched to the ground or the plane on the other side, sized and counted from its dissipation; the AI reviews the plan and the binary lands it.

**Clip: thermal-vias, visit 3, the PCB editor from 2026-11-09T06:34:58Z to 2026-11-09T06:35:02Z. Motion only: 0.1 min of real time, 0 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/thermal-vias-3.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the thermal-vias, visit 3 clip, what the camera saw.**

![nine frames of thermal-vias, visit 3](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/thermal-vias-3-sheet.png)

**Screenshot: the board when thermal-vias, visit 3 began.**

![the board when thermal-vias, visit 3 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-thermal-vias-3-start.png)

**Screenshot: the board when thermal-vias, visit 3 ended.**

![the board when thermal-vias, visit 3 ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-thermal-vias-3-end.png)

### pours, visit 6

What this step does: pour every net the spec names, keepouts along Kelvin taps, thermal and stitching vias, land, measure the copper kept

**Clip: pours, visit 6, the PCB editor from 2026-11-09T06:35:05Z to 2026-11-09T06:35:51Z. Motion only: 0.8 min of real time, 2 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/pours-6.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the pours, visit 6 clip, what the camera saw.**

![nine frames of pours, visit 6](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/pours-6-sheet.png)

**Screenshot: the board when pours, visit 6 began.**

![the board when pours, visit 6 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-pours-6-start.png)

**Screenshot: the board when pours, visit 6 ended.**

![the board when pours, visit 6 ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-pours-6-end.png)

### outline, visit 2

What this step does: Round the board's corners: every sharp outline corner becomes a radius (1.0 mm by default, spec outline.cornerRadius), so the board is kind to hands, panels and the fab's router.

**Clip: outline, visit 2, the PCB editor from 2026-11-09T06:35:56Z to 2026-11-09T06:36:00Z. Motion only: 0.1 min of real time, 0 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/outline-2.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the outline, visit 2 clip, what the camera saw.**

![nine frames of outline, visit 2](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/outline-2-sheet.png)

**Screenshot: the board when outline, visit 2 began.**

![the board when outline, visit 2 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-outline-2-start.png)

**Screenshot: the board when outline, visit 2 ended.**

![the board when outline, visit 2 ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-outline-2-end.png)

### current, visit 7

What this step does: IPC-2221 on every loaded net, pour and via capacity, the same-layer rule; then the AI's own current density drawing and a walkthrough of the pours it judged

**Clip: current, visit 7, the PCB editor from 2026-11-09T06:36:02Z to 2026-11-09T06:36:06Z. Motion only: 0.1 min of real time, 0 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/current-7.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the current, visit 7 clip, what the camera saw.**

![nine frames of current, visit 7](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/current-7-sheet.png)

**Screenshot: the board when current, visit 7 began.**

![the board when current, visit 7 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-current-7-start.png)

**Screenshot: the board when current, visit 7 ended.**

![the board when current, visit 7 ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-current-7-end.png)

### thermal, visit 7

What this step does: copper and vias at every hot tab against the rise budget; then the AI's own temperature rise drawing and a walkthrough of the pours it judged

**Clip: thermal, visit 7, the PCB editor from 2026-11-09T06:36:09Z to 2026-11-09T06:36:13Z. Motion only: 0.1 min of real time, 1 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/thermal-7.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the thermal, visit 7 clip, what the camera saw.**

![nine frames of thermal, visit 7](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/thermal-7-sheet.png)

**Screenshot: the board when thermal, visit 7 began.**

![the board when thermal, visit 7 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-thermal-7-start.png)

**Screenshot: the board when thermal, visit 7 ended.**

![the board when thermal, visit 7 ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-thermal-7-end.png)

### silkscreen, visit 3

What this step does: Make both faces useful in real service: references and values, verified connector and machine-contact pinouts, polarity, board identity and bring-up labels; review native plots and assembled visibility. Offer the optional shared silkscreen dashboard: real solver events, candidate reasons, live/replay separation, fitted-model inspection and separately recorded detailed/5s replays. Audit every fitted body and every via/hole across the whole board, both faces, with coverage counts. Missing Fab geometry is not free space; native DRC does not establish fitted visibility. Keep unresolved labels explicit and do not apply an incomplete layout. Native geometry/edit/undo/refresh belongs to the EDA bridge.

**Clip: silkscreen, visit 3, the PCB editor from 2026-11-09T06:36:16Z to 2026-11-09T06:36:25Z. Motion only: 0.1 min of real time, 1 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/silkscreen-3.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the silkscreen, visit 3 clip, what the camera saw.**

![nine frames of silkscreen, visit 3](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/silkscreen-3-sheet.png)

**Screenshot: the board when silkscreen, visit 3 began.**

![the board when silkscreen, visit 3 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-silkscreen-3-start.png)

**Screenshot: the board when silkscreen, visit 3 ended.**

![the board when silkscreen, visit 3 ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-silkscreen-3-end.png)

### finish, visit 3

What this step does: finish refuses until everything is true; the AI cuts the video and delivers

**Clip: finish, visit 3, the PCB editor from 2026-11-09T06:36:28Z to 2026-11-09T06:37:06Z. Motion only: 0.6 min of real time, 0 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/finish-3.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the finish, visit 3 clip, what the camera saw.**

![nine frames of finish, visit 3](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/finish-3-sheet.png)

**Screenshot: the board when finish, visit 3 began.**

![the board when finish, visit 3 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-finish-3-start.png)

### fields, visit 3

What this step does: the fields on the board: adom-fields solves the current density of every loaded net, the heat flow in each copper layer with the vias, and the temperature over the board; the AI reads the issues and walks the board in the app on camera

**Clip: fields, visit 3, the PCB editor from 2026-11-09T06:37:39Z to 2026-11-09T06:48:24Z. Motion only: 10.4 min of real time, 438 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/fields-3.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the fields, visit 3 clip, what the camera saw.**

![nine frames of fields, visit 3](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/fields-3-sheet.png)

### nets, visit 3

What this step does: the copper pour walkthrough: every poured net (and every loaded, wide or Kelvin net) highlighted on its own in turn, the board framed, so the viewer sees where each net's copper is; the AI names each one

**Clip: nets, visit 3, the PCB editor from 2026-11-09T06:50:14Z to 2026-11-09T06:51:17Z. Motion only: 1.0 min of real time, 3 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/nets-3.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the nets, visit 3 clip, what the camera saw.**

![nine frames of nets, visit 3](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/nets-3-sheet.png)

**Screenshot: the board when nets, visit 3 began.**

![the board when nets, visit 3 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-nets-3-start.png)

**Screenshot: the board when nets, visit 3 ended.**

![the board when nets, visit 3 ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-nets-3-end.png)

### 3d, visit 3

What this step does: the 3D walkthrough: the viewer opened from the editor, then fit, top, tilt, orbit, zoom in, swing, front, bottom, flip, top, fit, all by menu command, no mouse

**Clip: 3d, visit 3, the PCB editor from 2026-11-09T06:51:42Z to 2026-11-09T06:52:07Z. Motion only: 0.4 min of real time, 9 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/3d-3.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the 3d, visit 3 clip, what the camera saw.**

![nine frames of 3d, visit 3](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/3d-3-sheet.png)

**Screenshot: the board when 3d, visit 3 began.**

![the board when 3d, visit 3 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-3d-3-start.png)

### finish, visit 4

What this step does: finish refuses until everything is true; the AI cuts the video and delivers

**Clip: finish, visit 4, the PCB editor from 2026-11-09T06:52:15Z to 2026-11-09T06:52:55Z. Motion only: 0.7 min of real time, 0 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/finish-4.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the finish, visit 4 clip, what the camera saw.**

![nine frames of finish, visit 4](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/finish-4-sheet.png)

**Screenshot: the board when finish, visit 4 began.**

![the board when finish, visit 4 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-finish-4-start.png)

### export

What this step does: The finish line for the human: Gerbers, drill, BOM and pick-and-place (CPL) written from the finished board, checked, and announced in the chat with where every file is.

**Clip: export, the PCB editor from 2026-11-09T06:53:01Z to 2026-11-09T06:54:23Z. Motion only: 1.4 min of real time, 1 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/export-1.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the export clip, what the camera saw.**

![nine frames of export](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/export-1-sheet.png)

**Screenshot: the board when export began.**

![the board when export began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-export-1-start.png)

### placement, visit 7 (rework)

What this step does: place the parts for routability, current and heat; the binary packs, checks courtyards and lands moves; reserve visible space for connector labels and the two-sided service silkscreen; the switch-node check refuses switch copper under another part or a switch loop longer than the spec allows, and sends the AI back here

Why the AI came back here: Aesthetic redesign requested: symmetric controller area around the centred USB-C (ESD below the connector, STM32 right, power block left)

**Clip: placement, visit 7 (rework), the PCB editor from 2026-11-09T08:10:42Z to 2026-11-09T08:17:28Z. Motion only: 6.7 min of real time, 0 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/placement-7.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the placement, visit 7 (rework) clip, what the camera saw.**

![nine frames of placement, visit 7 (rework)](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/placement-7-sheet.png)

**Screenshot: the board when placement, visit 7 (rework) began.**

![the board when placement, visit 7 (rework) began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-placement-7-start.png)

### pours, visit 7

What this step does: pour every net the spec names, keepouts along Kelvin taps, thermal and stitching vias, land, measure the copper kept

**This clip filmed nothing usable: truncated: the MP4 has no moov atom (the recording died before it was finalised). It is kept as evidence and left out of the video.**

**Clip: pours, visit 7, still recording (started 2026-11-09T09:08:37Z); it appears here when the step ends.**

**Screenshot: the board when pours, visit 7 began.**

![the board when pours, visit 7 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-pours-7-start.png)

### pours, visit 8

What this step does: pour every net the spec names, keepouts along Kelvin taps, thermal and stitching vias, land, measure the copper kept

**Clip: pours, visit 8, still recording (started 2026-11-09T17:47:44Z); it appears here when the step ends.**

**Screenshot: the board when pours, visit 8 began.**

![the board when pours, visit 8 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-pours-8-start.png)

### pours, visit 9

What this step does: pour every net the spec names, keepouts along Kelvin taps, thermal and stitching vias, land, measure the copper kept

**This clip filmed nothing usable: truncated: the MP4 has no moov atom (the recording died before it was finalised). It is kept as evidence and left out of the video.**

**Clip: pours, visit 9, still recording (started 2026-11-09T17:59:51Z); it appears here when the step ends.**

**Screenshot: the board when pours, visit 9 began.**

![the board when pours, visit 9 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-pours-9-start.png)

### pours, visit 10

What this step does: pour every net the spec names, keepouts along Kelvin taps, thermal and stitching vias, land, measure the copper kept

**Clip: pours, visit 10, the PCB editor from 2026-11-09T19:57:07Z to 2026-11-09T20:05:10Z. Motion only: 7.9 min of real time, 6 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/pours-10.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the pours, visit 10 clip, what the camera saw.**

![nine frames of pours, visit 10](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/pours-10-sheet.png)

**Screenshot: the board when pours, visit 10 began.**

![the board when pours, visit 10 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-pours-10-start.png)

### pours, visit 11

What this step does: pour every net the spec names, keepouts along Kelvin taps, thermal and stitching vias, land, measure the copper kept

**Clip: pours, visit 11, the PCB editor from 2026-11-09T20:06:29Z to 2026-11-09T20:07:41Z. Motion only: 1.2 min of real time, 3 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/pours-11.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the pours, visit 11 clip, what the camera saw.**

![nine frames of pours, visit 11](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/pours-11-sheet.png)

**Screenshot: the board when pours, visit 11 began.**

![the board when pours, visit 11 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-pours-11-start.png)

**Screenshot: the board when pours, visit 11 ended.**

![the board when pours, visit 11 ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-pours-11-end.png)

### current, visit 9

What this step does: IPC-2221 on every loaded net, pour and via capacity, the same-layer rule; then the AI's own current density drawing and a walkthrough of the pours it judged

**Clip: current, visit 9, still recording (started 2026-11-09T20:07:55Z); it appears here when the step ends.**

**Screenshot: the board when current, visit 9 began.**

![the board when current, visit 9 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-current-9-start.png)

**Screenshot: the board when current, visit 9 ended.**

![the board when current, visit 9 ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-current-9-end.png)

### thermal, visit 9

What this step does: copper and vias at every hot tab against the rise budget; then the AI's own temperature rise drawing and a walkthrough of the pours it judged

**Clip: thermal, visit 9, the PCB editor from 2026-11-09T20:24:06Z to 2026-11-09T20:24:13Z. Motion only: 0.1 min of real time, 0 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/thermal-9.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the thermal, visit 9 clip, what the camera saw.**

![nine frames of thermal, visit 9](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/thermal-9-sheet.png)

**Screenshot: the board when thermal, visit 9 began.**

![the board when thermal, visit 9 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-thermal-9-start.png)

**Screenshot: the board when thermal, visit 9 ended.**

![the board when thermal, visit 9 ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-thermal-9-end.png)

### silkscreen, visit 5

What this step does: Make both faces useful in real service: references and values, verified connector and machine-contact pinouts, polarity, board identity and bring-up labels; review native plots and assembled visibility. Offer the optional shared silkscreen dashboard: real solver events, candidate reasons, live/replay separation, fitted-model inspection and separately recorded detailed/5s replays. Audit every fitted body and every via/hole across the whole board, both faces, with coverage counts. Missing Fab geometry is not free space; native DRC does not establish fitted visibility. Keep unresolved labels explicit and do not apply an incomplete layout. Native geometry/edit/undo/refresh belongs to the EDA bridge.

**Clip: silkscreen, visit 5, the PCB editor from 2026-11-09T20:24:17Z to 2026-11-09T20:28:33Z. Motion only: 4.1 min of real time, 6 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/silkscreen-5.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the silkscreen, visit 5 clip, what the camera saw.**

![nine frames of silkscreen, visit 5](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/silkscreen-5-sheet.png)

**Screenshot: the board when silkscreen, visit 5 began.**

![the board when silkscreen, visit 5 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-silkscreen-5-start.png)

**Screenshot: the board when silkscreen, visit 5 ended.**

![the board when silkscreen, visit 5 ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-silkscreen-5-end.png)

### thermal-vias, visit 4

What this step does: Heatsink vias where the heat is: for every part that dissipates real power (the regulator, the inductor, the catch diode, the FETs), an array of vias in its thermal pad or the copper it dumps heat into, stitched to the ground or the plane on the other side, sized and counted from its dissipation; the AI reviews the plan and the binary lands it.

**Clip: thermal-vias, visit 4, the PCB editor from 2026-11-09T20:29:13Z to 2026-11-09T20:29:22Z. Motion only: 0.2 min of real time, 0 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/thermal-vias-4.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the thermal-vias, visit 4 clip, what the camera saw.**

![nine frames of thermal-vias, visit 4](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/thermal-vias-4-sheet.png)

**Screenshot: the board when thermal-vias, visit 4 began.**

![the board when thermal-vias, visit 4 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-thermal-vias-4-start.png)

**Screenshot: the board when thermal-vias, visit 4 ended.**

![the board when thermal-vias, visit 4 ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-thermal-vias-4-end.png)

### outline, visit 3

What this step does: Round the board's corners: every sharp outline corner becomes a radius (1.0 mm by default, spec outline.cornerRadius), so the board is kind to hands, panels and the fab's router.

**Clip: outline, visit 3, the PCB editor from 2026-11-09T20:29:26Z to 2026-11-09T20:29:34Z. Motion only: 0.1 min of real time, 0 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/outline-3.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the outline, visit 3 clip, what the camera saw.**

![nine frames of outline, visit 3](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/outline-3-sheet.png)

**Screenshot: the board when outline, visit 3 began.**

![the board when outline, visit 3 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-outline-3-start.png)

**Screenshot: the board when outline, visit 3 ended.**

![the board when outline, visit 3 ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-outline-3-end.png)

### fields, visit 4

What this step does: the fields on the board: adom-fields solves the current density of every loaded net, the heat flow in each copper layer with the vias, and the temperature over the board; the AI reads the issues and walks the board in the app on camera

**Clip: fields, visit 4, the PCB editor from 2026-11-09T20:29:55Z to 2026-11-09T20:40:28Z. Motion only: 10.4 min of real time, 440 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/fields-4.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the fields, visit 4 clip, what the camera saw.**

![nine frames of fields, visit 4](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/fields-4-sheet.png)

### nets, visit 4

What this step does: the copper pour walkthrough: every poured net (and every loaded, wide or Kelvin net) highlighted on its own in turn, the board framed, so the viewer sees where each net's copper is; the AI names each one

**Clip: nets, visit 4, the PCB editor from 2026-11-09T20:43:13Z to 2026-11-09T20:44:21Z. Motion only: 1.1 min of real time, 3 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/nets-4.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the nets, visit 4 clip, what the camera saw.**

![nine frames of nets, visit 4](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/nets-4-sheet.png)

**Screenshot: the board when nets, visit 4 began.**

![the board when nets, visit 4 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-nets-4-start.png)

**Screenshot: the board when nets, visit 4 ended.**

![the board when nets, visit 4 ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-nets-4-end.png)

### 3d, visit 4

What this step does: the 3D walkthrough: the viewer opened from the editor, then fit, top, tilt, orbit, zoom in, swing, front, bottom, flip, top, fit, all by menu command, no mouse

**Clip: 3d, visit 4, the PCB editor from 2026-11-09T20:45:47Z to 2026-11-09T20:46:12Z. Motion only: 0.4 min of real time, 10 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/3d-4.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the 3d, visit 4 clip, what the camera saw.**

![nine frames of 3d, visit 4](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/3d-4-sheet.png)

**Screenshot: the board when 3d, visit 4 began.**

![the board when 3d, visit 4 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-3d-4-start.png)

### finish, visit 5

What this step does: finish refuses until everything is true; the AI cuts the video and delivers

**Clip: finish, visit 5, the PCB editor from 2026-11-09T20:46:34Z to 2026-11-09T20:47:55Z. Motion only: 1.3 min of real time, 0 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/finish-5.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the finish, visit 5 clip, what the camera saw.**

![nine frames of finish, visit 5](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/finish-5-sheet.png)

**Screenshot: the board when finish, visit 5 began.**

![the board when finish, visit 5 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-finish-5-start.png)

### export, visit 2

What this step does: The finish line for the human: Gerbers, drill, BOM and pick-and-place (CPL) written from the finished board, checked, and announced in the chat with where every file is.

**Clip: export, visit 2, the PCB editor from 2026-11-09T20:48:13Z to 2026-11-09T20:51:55Z. Motion only: 3.7 min of real time, 2 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/export-2.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the export, visit 2 clip, what the camera saw.**

![nine frames of export, visit 2](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/export-2-sheet.png)

**Screenshot: the board when export, visit 2 began.**

![the board when export, visit 2 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-export-2-start.png)

### silkscreen, visit 7

What this step does: Make both faces useful in real service: references and values, verified connector and machine-contact pinouts, polarity, board identity and bring-up labels; review native plots and assembled visibility. Offer the optional shared silkscreen dashboard: real solver events, candidate reasons, live/replay separation, fitted-model inspection and separately recorded detailed/5s replays. Audit every fitted body and every via/hole across the whole board, both faces, with coverage counts. Missing Fab geometry is not free space; native DRC does not establish fitted visibility. Keep unresolved labels explicit and do not apply an incomplete layout. Native geometry/edit/undo/refresh belongs to the EDA bridge.

**Clip: silkscreen, visit 7, the PCB editor from 2026-11-09T20:59:20Z to 2026-11-09T20:59:39Z. Motion only: 0.3 min of real time, 0 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/silkscreen-7.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the silkscreen, visit 7 clip, what the camera saw.**

![nine frames of silkscreen, visit 7](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/silkscreen-7-sheet.png)

**Screenshot: the board when silkscreen, visit 7 ended.**

![the board when silkscreen, visit 7 ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-silkscreen-7-end.png)

### finish, visit 7

What this step does: finish refuses until everything is true; the AI cuts the video and delivers

**Clip: finish, visit 7, the PCB editor from 2026-11-09T20:59:45Z to 2026-11-09T21:00:38Z. Motion only: 0.9 min of real time, 0 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/finish-7.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the finish, visit 7 clip, what the camera saw.**

![nine frames of finish, visit 7](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/finish-7-sheet.png)

### export, visit 4

What this step does: The finish line for the human: Gerbers, drill, BOM and pick-and-place (CPL) written from the finished board, checked, and announced in the chat with where every file is.

**Clip: export, visit 4, the PCB editor from 2026-11-09T21:00:52Z to 2026-11-09T21:01:55Z. Motion only: 1.0 min of real time, 0 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/export-4.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the export, visit 4 clip, what the camera saw.**

![nine frames of export, visit 4](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/export-4-sheet.png)

### current, visit 11

What this step does: IPC-2221 on every loaded net, pour and via capacity, the same-layer rule; then the AI's own current density drawing and a walkthrough of the pours it judged

**Clip: current, visit 11, the PCB editor from 2026-11-09T21:07:43Z to 2026-11-09T21:07:49Z. Motion only: 0.1 min of real time, 0 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/current-11.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the current, visit 11 clip, what the camera saw.**

![nine frames of current, visit 11](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/current-11-sheet.png)

**Screenshot: the board when current, visit 11 began.**

![the board when current, visit 11 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-current-11-start.png)

**Screenshot: the board when current, visit 11 ended.**

![the board when current, visit 11 ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-current-11-end.png)

### thermal, visit 11

What this step does: copper and vias at every hot tab against the rise budget; then the AI's own temperature rise drawing and a walkthrough of the pours it judged

**Clip: thermal, visit 11, the PCB editor from 2026-11-09T21:07:52Z to 2026-11-09T21:08:00Z. Motion only: 0.1 min of real time, 1 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/thermal-11.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the thermal, visit 11 clip, what the camera saw.**

![nine frames of thermal, visit 11](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/thermal-11-sheet.png)

**Screenshot: the board when thermal, visit 11 began.**

![the board when thermal, visit 11 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-thermal-11-start.png)

**Screenshot: the board when thermal, visit 11 ended.**

![the board when thermal, visit 11 ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-thermal-11-end.png)

### fields, visit 5

What this step does: the fields on the board: adom-fields solves the current density of every loaded net, the heat flow in each copper layer with the vias, and the temperature over the board; the AI reads the issues and walks the board in the app on camera

**Clip: fields, visit 5, the PCB editor from 2026-11-09T21:08:20Z to 2026-11-09T21:18:54Z. Motion only: 10.4 min of real time, 439 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/fields-5.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the fields, visit 5 clip, what the camera saw.**

![nine frames of fields, visit 5](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/fields-5-sheet.png)

### nets, visit 5

What this step does: the copper pour walkthrough: every poured net (and every loaded, wide or Kelvin net) highlighted on its own in turn, the board framed, so the viewer sees where each net's copper is; the AI names each one

**Clip: nets, visit 5, the PCB editor from 2026-11-09T21:21:45Z to 2026-11-09T21:22:43Z. Motion only: 0.9 min of real time, 2 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/nets-5.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the nets, visit 5 clip, what the camera saw.**

![nine frames of nets, visit 5](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/nets-5-sheet.png)

**Screenshot: the board when nets, visit 5 began.**

![the board when nets, visit 5 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-nets-5-start.png)

**Screenshot: the board when nets, visit 5 ended.**

![the board when nets, visit 5 ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-nets-5-end.png)

### silkscreen, visit 9

What this step does: Make both faces useful in real service: references and values, verified connector and machine-contact pinouts, polarity, board identity and bring-up labels; review native plots and assembled visibility. Offer the optional shared silkscreen dashboard: real solver events, candidate reasons, live/replay separation, fitted-model inspection and separately recorded detailed/5s replays. Audit every fitted body and every via/hole across the whole board, both faces, with coverage counts. Missing Fab geometry is not free space; native DRC does not establish fitted visibility. Keep unresolved labels explicit and do not apply an incomplete layout. Native geometry/edit/undo/refresh belongs to the EDA bridge.

**Clip: silkscreen, visit 9, the PCB editor from 2026-11-09T21:22:53Z to 2026-11-09T21:23:08Z. Motion only: 0.2 min of real time, 0 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/silkscreen-9.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the silkscreen, visit 9 clip, what the camera saw.**

![nine frames of silkscreen, visit 9](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/silkscreen-9-sheet.png)

**Screenshot: the board when silkscreen, visit 9 began.**

![the board when silkscreen, visit 9 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-silkscreen-9-start.png)

**Screenshot: the board when silkscreen, visit 9 ended.**

![the board when silkscreen, visit 9 ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-silkscreen-9-end.png)

### 3d, visit 5

What this step does: the 3D walkthrough: the viewer opened from the editor, then fit, top, tilt, orbit, zoom in, swing, front, bottom, flip, top, fit, all by menu command, no mouse

**Clip: 3d, visit 5, the PCB editor from 2026-11-09T21:23:42Z to 2026-11-09T21:24:06Z. Motion only: 0.4 min of real time, 9 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/3d-5.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the 3d, visit 5 clip, what the camera saw.**

![nine frames of 3d, visit 5](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/3d-5-sheet.png)

**Screenshot: the board when 3d, visit 5 began.**

![the board when 3d, visit 5 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-3d-5-start.png)

### finish, visit 9

What this step does: finish refuses until everything is true; the AI cuts the video and delivers

**Clip: finish, visit 9, the PCB editor from 2026-11-09T21:24:30Z to 2026-11-09T21:24:35Z. Motion only: 0.1 min of real time, 0 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/finish-9.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the finish, visit 9 clip, what the camera saw.**

![nine frames of finish, visit 9](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/finish-9-sheet.png)

**Screenshot: the board when finish, visit 9 began.**

![the board when finish, visit 9 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-finish-9-start.png)

**Screenshot: the board when finish, visit 9 ended.**

![the board when finish, visit 9 ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-finish-9-end.png)

### export, visit 6

What this step does: The finish line for the human: Gerbers, drill, BOM and pick-and-place (CPL) written from the finished board, checked, and announced in the chat with where every file is.

**Clip: export, visit 6, the PCB editor from 2026-11-09T21:24:38Z to 2026-11-09T21:25:44Z. Motion only: 1.1 min of real time, 1 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/export-6.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the export, visit 6 clip, what the camera saw.**

![nine frames of export, visit 6](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/export-6-sheet.png)

**Screenshot: the board when export, visit 6 began.**

![the board when export, visit 6 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-export-6-start.png)

### current, visit 12

What this step does: IPC-2221 on every loaded net, pour and via capacity, the same-layer rule; then the AI's own current density drawing and a walkthrough of the pours it judged

**Clip: current, visit 12, still recording (started 2026-11-09T22:07:25Z); it appears here when the step ends.**

**Screenshot: the board when current, visit 12 began.**

![the board when current, visit 12 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-current-12-start.png)

**Screenshot: the board when current, visit 12 ended.**

![the board when current, visit 12 ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-current-12-end.png)

### thermal, visit 12

What this step does: copper and vias at every hot tab against the rise budget; then the AI's own temperature rise drawing and a walkthrough of the pours it judged

**Clip: thermal, visit 12, the PCB editor from 2026-11-09T22:23:21Z to 2026-11-09T22:23:28Z. Motion only: 0.1 min of real time, 0 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/thermal-12.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the thermal, visit 12 clip, what the camera saw.**

![nine frames of thermal, visit 12](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/thermal-12-sheet.png)

**Screenshot: the board when thermal, visit 12 began.**

![the board when thermal, visit 12 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-thermal-12-start.png)

**Screenshot: the board when thermal, visit 12 ended.**

![the board when thermal, visit 12 ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-thermal-12-end.png)

### fields, visit 6

What this step does: the fields on the board: adom-fields solves the current density of every loaded net, the heat flow in each copper layer with the vias, and the temperature over the board; the AI reads the issues and walks the board in the app on camera

**Clip: fields, visit 6, the PCB editor from 2026-11-09T22:23:51Z to 2026-11-09T22:34:24Z. Motion only: 10.4 min of real time, 441 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/fields-6.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the fields, visit 6 clip, what the camera saw.**

![nine frames of fields, visit 6](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/fields-6-sheet.png)

**The AI's drawing: Adom Fields current and heat screen on the final board: VBUS and GND at 0.5 A peak 40 A/mm2, +3V3 at 0.1 A 12 A/mm2, under 1 C rise in still air. The 'no TVS' tag on J2 is expected: ESD protection is on the USB daughterboard.**

![Adom Fields current and heat screen on the final board: VBUS and GND at 0.5 A peak 40 A/mm2, +3V3 at 0.1 A 12 A/mm2, under 1 C rise in still air. The 'no TVS' tag on J2 is expected: ESD protection is on the USB daughterboard.](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/fields-6-analysis-image-0.png)

### nets, visit 6

What this step does: the copper pour walkthrough: every poured net (and every loaded, wide or Kelvin net) highlighted on its own in turn, the board framed, so the viewer sees where each net's copper is; the AI names each one

**Clip: nets, visit 6, the PCB editor from 2026-11-09T22:37:08Z to 2026-11-09T22:38:15Z. Motion only: 1.1 min of real time, 3 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/nets-6.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the nets, visit 6 clip, what the camera saw.**

![nine frames of nets, visit 6](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/nets-6-sheet.png)

**Screenshot: the board when nets, visit 6 began.**

![the board when nets, visit 6 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-nets-6-start.png)

**Screenshot: the board when nets, visit 6 ended.**

![the board when nets, visit 6 ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-nets-6-end.png)

### silkscreen, visit 10

What this step does: Make both faces useful in real service: references and values, verified connector and machine-contact pinouts, polarity, board identity and bring-up labels; review native plots and assembled visibility. Offer the optional shared silkscreen dashboard: real solver events, candidate reasons, live/replay separation, fitted-model inspection and separately recorded detailed/5s replays. Audit every fitted body and every via/hole across the whole board, both faces, with coverage counts. Missing Fab geometry is not free space; native DRC does not establish fitted visibility. Keep unresolved labels explicit and do not apply an incomplete layout. Native geometry/edit/undo/refresh belongs to the EDA bridge.

**Clip: silkscreen, visit 10, the PCB editor from 2026-11-09T22:38:27Z to 2026-11-09T22:38:38Z. Motion only: 0.2 min of real time, 1 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/silkscreen-10.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the silkscreen, visit 10 clip, what the camera saw.**

![nine frames of silkscreen, visit 10](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/silkscreen-10-sheet.png)

**Screenshot: the board when silkscreen, visit 10 began.**

![the board when silkscreen, visit 10 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-silkscreen-10-start.png)

**Screenshot: the board when silkscreen, visit 10 ended.**

![the board when silkscreen, visit 10 ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-silkscreen-10-end.png)

### 3d, visit 6

What this step does: the 3D walkthrough: the viewer opened from the editor, then fit, top, tilt, orbit, zoom in, swing, front, bottom, flip, top, fit, all by menu command, no mouse

**Clip: 3d, visit 6, the PCB editor from 2026-11-09T22:39:09Z to 2026-11-09T22:39:33Z. Motion only: 0.4 min of real time, 9 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/3d-6.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the 3d, visit 6 clip, what the camera saw.**

![nine frames of 3d, visit 6](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/3d-6-sheet.png)

**Screenshot: the board when 3d, visit 6 began.**

![the board when 3d, visit 6 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-3d-6-start.png)

### finish, visit 10

What this step does: finish refuses until everything is true; the AI cuts the video and delivers

**Clip: finish, visit 10, the PCB editor from 2026-11-09T22:40:00Z to 2026-11-09T22:40:05Z. Motion only: 0.1 min of real time, 0 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/finish-10.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the finish, visit 10 clip, what the camera saw.**

![nine frames of finish, visit 10](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/finish-10-sheet.png)

**Screenshot: the board when finish, visit 10 began.**

![the board when finish, visit 10 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-finish-10-start.png)

**Screenshot: the board when finish, visit 10 ended.**

![the board when finish, visit 10 ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-finish-10-end.png)

### export, visit 7

What this step does: The finish line for the human: Gerbers, drill, BOM and pick-and-place (CPL) written from the finished board, checked, and announced in the chat with where every file is.

**Clip: export, visit 7, the PCB editor from 2026-11-09T22:40:08Z to 2026-11-09T22:41:26Z. Motion only: 1.3 min of real time, 0 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/export-7.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the export, visit 7 clip, what the camera saw.**

![nine frames of export, visit 7](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/export-7-sheet.png)

**Screenshot: the board when export, visit 7 began.**

![the board when export, visit 7 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-export-7-start.png)

### rules, visit 2 (rework)

What this step does: Choose the fab and load its design rules before anything is drawn: the AI asks the human which fab builds the board (3rdPartyFab by default, JLCPCB on request) and loads that fab's rule profile into the EDA (KiCad .kicad_dru, Fusion DRC rules), so every later step designs to the process that will build it.

Why the AI came back here: Rev B requested by the user: PCBWay bare board (hand-soldered), soldered MX switches instead of hotswap sockets, green mask, lead-free HASL

**Clip: rules, visit 2 (rework), the PCB editor from 2026-11-10T04:11:02Z to 2026-11-10T04:11:39Z. Motion only: 0.6 min of real time, 27 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/rules-2.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the rules, visit 2 (rework) clip, what the camera saw.**

![nine frames of rules, visit 2 (rework)](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/rules-2-sheet.png)

**Screenshot: the board when rules, visit 2 (rework) began.**

![the board when rules, visit 2 (rework) began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-rules-2-start.png)

**Screenshot: the board when rules, visit 2 (rework) ended.**

![the board when rules, visit 2 (rework) ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-rules-2-end.png)

### test-plan, visit 2

What this step does: Think through how this board will be tested once it is built and on the probing workcell: the measurements a careful engineer would take (rails, switch node, feedback, ripple, enable, LEDs), the net each one needs, and a probe spot for every one. The binary checks each planned measurement has a probe-able spot (a 0.5 mm round test point or an exposed pad the pogo tip can land on, within 50 mm of a ground machine contact, not under a part body) and adds a test point to the netlist for every gap.

**Clip: test-plan, visit 2, the PCB editor from 2026-11-10T04:12:59Z to 2026-11-10T04:13:04Z. Motion only: 0.1 min of real time, 4 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/test-plan-2.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the test-plan, visit 2 clip, what the camera saw.**

![nine frames of test-plan, visit 2](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/test-plan-2-sheet.png)

**Screenshot: the board when test-plan, visit 2 began.**

![the board when test-plan, visit 2 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-test-plan-2-start.png)

**Screenshot: the board when test-plan, visit 2 ended.**

![the board when test-plan, visit 2 ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-test-plan-2-end.png)

### placement, visit 9 (rework)

What this step does: place the parts for routability, current and heat; the binary packs, checks courtyards and lands moves; reserve visible space for connector labels and the two-sided service silkscreen; the switch-node check refuses switch copper under another part or a switch loop longer than the spec allows, and sends the AI back here

Why the AI came back here: re-verify the placements with the rev B board open in KiCad (the first check ran with no editor open)

**Clip: placement, visit 9 (rework), the PCB editor from 2026-11-10T04:14:51Z to 2026-11-10T04:15:08Z. Motion only: 0.3 min of real time, 0 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/placement-9.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the placement, visit 9 (rework) clip, what the camera saw.**

![nine frames of placement, visit 9 (rework)](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/placement-9-sheet.png)

**Screenshot: the board when placement, visit 9 (rework) began.**

![the board when placement, visit 9 (rework) began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-placement-9-start.png)

**Screenshot: the board when placement, visit 9 (rework) ended.**

![the board when placement, visit 9 (rework) ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-placement-9-end.png)

### routing, visit 12

What this step does: route to 100 percent with the spec's rules, gate with KiCad's DRC, land as undo steps; the AI takes it with take route=ai

**Clip: routing, visit 12, the PCB editor from 2026-11-10T04:15:13Z to 2026-11-10T04:15:38Z. Motion only: 0.4 min of real time, 0 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/routing-12.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the routing, visit 12 clip, what the camera saw.**

![nine frames of routing, visit 12](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/routing-12-sheet.png)

**Screenshot: the board when routing, visit 12 began.**

![the board when routing, visit 12 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-routing-12-start.png)

**Screenshot: the board when routing, visit 12 ended.**

![the board when routing, visit 12 ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-routing-12-end.png)

### thermal-vias, visit 5

What this step does: Heatsink vias where the heat is: for every part that dissipates real power (the regulator, the inductor, the catch diode, the FETs), an array of vias in its thermal pad or the copper it dumps heat into, stitched to the ground or the plane on the other side, sized and counted from its dissipation; the AI reviews the plan and the binary lands it.

**Clip: thermal-vias, visit 5, the PCB editor from 2026-11-10T04:15:44Z to 2026-11-10T04:16:01Z. Motion only: 0.3 min of real time, 5 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/thermal-vias-5.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the thermal-vias, visit 5 clip, what the camera saw.**

![nine frames of thermal-vias, visit 5](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/thermal-vias-5-sheet.png)

**Screenshot: the board when thermal-vias, visit 5 began.**

![the board when thermal-vias, visit 5 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-thermal-vias-5-start.png)

**Screenshot: the board when thermal-vias, visit 5 ended.**

![the board when thermal-vias, visit 5 ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-thermal-vias-5-end.png)

### pours, visit 12

What this step does: pour every net the spec names, keepouts along Kelvin taps, thermal and stitching vias, land, measure the copper kept

**Clip: pours, visit 12, the PCB editor from 2026-11-10T04:16:07Z to 2026-11-10T04:17:13Z. Motion only: 1.1 min of real time, 18 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/pours-12.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the pours, visit 12 clip, what the camera saw.**

![nine frames of pours, visit 12](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/pours-12-sheet.png)

**Screenshot: the board when pours, visit 12 began.**

![the board when pours, visit 12 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-pours-12-start.png)

**Screenshot: the board when pours, visit 12 ended.**

![the board when pours, visit 12 ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-pours-12-end.png)

### outline, visit 4

What this step does: Round the board's corners: every sharp outline corner becomes a radius (1.0 mm by default, spec outline.cornerRadius), so the board is kind to hands, panels and the fab's router.

**Clip: outline, visit 4, the PCB editor from 2026-11-10T04:17:26Z to 2026-11-10T04:17:38Z. Motion only: 0.2 min of real time, 2 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/outline-4.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the outline, visit 4 clip, what the camera saw.**

![nine frames of outline, visit 4](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/outline-4-sheet.png)

**Screenshot: the board when outline, visit 4 began.**

![the board when outline, visit 4 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-outline-4-start.png)

**Screenshot: the board when outline, visit 4 ended.**

![the board when outline, visit 4 ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-outline-4-end.png)

### current, visit 13

What this step does: IPC-2221 on every loaded net, pour and via capacity, the same-layer rule; then the AI's own current density drawing and a walkthrough of the pours it judged

**Clip: current, visit 13, the PCB editor from 2026-11-10T04:17:42Z to 2026-11-10T04:34:21Z. Motion only: 16.4 min of real time, 86 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/current-13.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the current, visit 13 clip, what the camera saw.**

![nine frames of current, visit 13](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/current-13-sheet.png)

**Screenshot: the board when current, visit 13 began.**

![the board when current, visit 13 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-current-13-start.png)

**Screenshot: the board when current, visit 13 ended.**

![the board when current, visit 13 ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-current-13-end.png)

### thermal, visit 13

What this step does: copper and vias at every hot tab against the rise budget; then the AI's own temperature rise drawing and a walkthrough of the pours it judged

**Clip: thermal, visit 13, the PCB editor from 2026-11-10T04:36:43Z to 2026-11-10T04:36:58Z. Motion only: 0.2 min of real time, 2 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/thermal-13.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the thermal, visit 13 clip, what the camera saw.**

![nine frames of thermal, visit 13](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/thermal-13-sheet.png)

**Screenshot: the board when thermal, visit 13 began.**

![the board when thermal, visit 13 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-thermal-13-start.png)

**Screenshot: the board when thermal, visit 13 ended.**

![the board when thermal, visit 13 ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-thermal-13-end.png)

### nets, visit 7

What this step does: the copper pour walkthrough: every poured net (and every loaded, wide or Kelvin net) highlighted on its own in turn, the board framed, so the viewer sees where each net's copper is; the AI names each one

**Clip: nets, visit 7, the PCB editor from 2026-11-10T04:39:24Z to 2026-11-10T04:39:46Z. Motion only: 0.4 min of real time, 3 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/nets-7.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the nets, visit 7 clip, what the camera saw.**

![nine frames of nets, visit 7](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/nets-7-sheet.png)

**Screenshot: the board when nets, visit 7 began.**

![the board when nets, visit 7 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-nets-7-start.png)

**Screenshot: the board when nets, visit 7 ended.**

![the board when nets, visit 7 ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-nets-7-end.png)

### silkscreen, visit 11

What this step does: Make both faces useful in real service: references and values, verified connector and machine-contact pinouts, polarity, board identity and bring-up labels; review native plots and assembled visibility. Offer the optional shared silkscreen dashboard: real solver events, candidate reasons, live/replay separation, fitted-model inspection and separately recorded detailed/5s replays. Audit every fitted body and every via/hole across the whole board, both faces, with coverage counts. Missing Fab geometry is not free space; native DRC does not establish fitted visibility. Keep unresolved labels explicit and do not apply an incomplete layout. Native geometry/edit/undo/refresh belongs to the EDA bridge.

**Clip: silkscreen, visit 11, the PCB editor from 2026-11-10T04:39:52Z to 2026-11-10T04:43:06Z. Motion only: 3.2 min of real time, 21 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/silkscreen-11.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the silkscreen, visit 11 clip, what the camera saw.**

![nine frames of silkscreen, visit 11](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/silkscreen-11-sheet.png)

**Screenshot: the board when silkscreen, visit 11 began.**

![the board when silkscreen, visit 11 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-silkscreen-11-start.png)

**Screenshot: the board when silkscreen, visit 11 ended.**

![the board when silkscreen, visit 11 ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-silkscreen-11-end.png)

### fields, visit 8

What this step does: the fields on the board: adom-fields solves the current density of every loaded net, the heat flow in each copper layer with the vias, and the temperature over the board; the AI reads the issues and walks the board in the app on camera

**Clip: fields, visit 8, the PCB editor from 2026-11-10T04:43:58Z to 2026-11-10T04:54:25Z. Motion only: 10.4 min of real time, 142 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/fields-8.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the fields, visit 8 clip, what the camera saw.**

![nine frames of fields, visit 8](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/fields-8-sheet.png)

### 3d, visit 7

What this step does: the 3D walkthrough: the viewer opened from the editor, then fit, top, tilt, orbit, zoom in, swing, front, bottom, flip, top, fit, all by menu command, no mouse

**Clip: 3d, visit 7, the PCB editor from 2026-11-10T04:57:00Z to 2026-11-10T04:57:25Z. Motion only: 0.4 min of real time, 11 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/3d-7.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the 3d, visit 7 clip, what the camera saw.**

![nine frames of 3d, visit 7](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/3d-7-sheet.png)

### fields, visit 9

What this step does: the fields on the board: adom-fields solves the current density of every loaded net, the heat flow in each copper layer with the vias, and the temperature over the board; the AI reads the issues and walks the board in the app on camera

**Clip: fields, visit 9, the PCB editor from 2026-11-10T05:17:41Z to 2026-11-10T05:28:14Z. Motion only: 10.4 min of real time, 450 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/fields-9.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the fields, visit 9 clip, what the camera saw.**

![nine frames of fields, visit 9](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/fields-9-sheet.png)

### 3d, visit 8

What this step does: the 3D walkthrough: the viewer opened from the editor, then fit, top, tilt, orbit, zoom in, swing, front, bottom, flip, top, fit, all by menu command, no mouse

**Clip: 3d, visit 8, the PCB editor from 2026-11-10T05:32:37Z to 2026-11-10T05:33:02Z. Motion only: 0.4 min of real time, 9 s of it had something moving; the clock in the corner is the real elapsed time.**

<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/3d-8.mp4" type="video/mp4"></video>

**Contact sheet: nine frames spread through the 3d, visit 8 clip, what the camera saw.**

![nine frames of 3d, visit 8](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/3d-8-sheet.png)

## Plan usage, the second cost line

Percent of each plan limit used, as the provider reports it, at the start of the run and at its end.

| Provider | Limit | At start | At end | Used by this run |
|---|---|---|---|---|
| claude | 5h | 8.00 % | 10.00 % | 50.00 % |
| claude | Fable | 65.00 % | 65.00 % | 0.00 % |
| claude | week | 43.00 % | 51.00 % | 8.00 % |

*The limits are per account, not per run: every AI thread signed in as this user draws on the same numbers, so a run made while other threads were working shows their usage too. Read it as an upper bound unless this run was the only thread active.*

## Given back

0 issue(s) or PR(s) filed by this run's AI to make the tool better for every Adom user.

Adom processes PRs within minutes during business hours: a non-stop PR intake runs all day.