65% MX Keyboard (soldered)

@@ -1,6 +1,6 @@ # AI Flow run: claude-opus-5-5 on board-0 -**finish ran with 6 open item(s); not cleared for fabrication** (2026-11-09T06:16:43Z, 303.4 min of AI time from the prompt). The open items are listed under the run's summary; finish again after any change.+**finish ran with 6 open item(s); not cleared for fabrication** (2026-11-09T06:16:43Z, 303.6 min of AI time from the prompt). The open items are listed under the run's summary; finish again after any change.  Prompt at 2026-11-09T00:22:00Z (UTC). Flow: board. Every number here is from the run's append-only ledger (run.jsonl). AI time is the time the AI was working on a prompt: from the human's prompt to the AI's done, with any gap over 15 min where no command ran (unobserved, not proven idle) cut out. @@ -10,8 +10,8 @@ One row per human prompt: the AI's time on it, unobserved gaps excluded by the h  | Session | Prompt at | Done at | AI time min | Unobserved gap min | What | |---|---|---|---|---|---|-| 1 | 2026-11-09T00:22:00Z | (open) | 303.4 | 52 | the first prompt |-| **all** | | | **303.4** | | |+| 1 | 2026-11-09T00:22:00Z | (open) | 303.6 | 52 | the first prompt |+| **all** | | | **303.6** | | |  ## Per step @@ -44,9 +44,9 @@ AI time only, the idle cut out. | silkscreen | 13.7 | 8.4 | 5.3 | 24 | 2 | 0 | 4.8 min | | simulation | 13.6 | 13.6 | 0.0 | 4 | 0 | 0 | 12.8 min | | sourcing | 4.5 | 4.5 | 0.0 | 7 | 0 | 0 | 4.5 min |-| test-plan | 1.4 | 1.3 | 0.1 | 4 | 1 | 0 | 1.3 min |-| thermal-vias | 0.1 | 0.0 | 0.1 | 3 | 1 | 0 | 0.0 min |-| **total** | **303.4** | **91.3** | **212.1** | | | | |+| test-plan | 1.5 | 1.3 | 0.2 | 5 | 1 | 0 | 1.3 min |+| thermal-vias | 0.2 | 0.0 | 0.2 | 4 | 2 | 0 | 0.0 min |+| **total** | **303.6** | **91.3** | **212.3** | | | | |  ## Returns to earlier steps @@ -107,6 +107,7 @@ AI time only, the idle cut out. - 2026-11-09T06:15:50Z clip-start:finish-1 - 2026-11-09T06:17:02Z clip-start:rules-1 - 2026-11-09T06:17:12Z clip-start:test-plan-1+- 2026-11-09T06:17:22Z clip-start:thermal-vias-2  ## Where the board stands @@ -861,12 +862,32 @@ Why the AI came back here: re-record this step's proof on the final board (run.j  What this step does: Think through how this board will be tested once it is built and on the probing workcell: the measurements a careful engineer would take (rails, switch node, feedback, ripple, enable, LEDs), the net each one needs, and a probe spot for every one. The binary checks each planned measurement has a probe-able spot (a 0.5 mm round test point or an exposed pad the pogo tip can land on, within 50 mm of a ground machine contact, not under a part body) and adds a test point to the netlist for every gap. -**Clip: test-plan, still recording (started 2026-11-09T06:17:12Z); it appears here when the step ends.**+**Clip: test-plan, the PCB editor from 2026-11-09T06:17:12Z to 2026-11-09T06:17:17Z. Motion only: 0.1 min of real time, 4 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/test-plan-1.mp4" type="video/mp4"></video>++**Contact sheet: nine frames spread through the test-plan clip, what the camera saw.**++![nine frames of test-plan](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/test-plan-1-sheet.png)  **Screenshot: the board when test-plan began.**  ![the board when test-plan began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-test-plan-1-start.png) +**Screenshot: the board when test-plan ended.**++![the board when test-plan ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-test-plan-1-end.png)++### thermal-vias, visit 2++What this step does: Heatsink vias where the heat is: for every part that dissipates real power (the regulator, the inductor, the catch diode, the FETs), an array of vias in its thermal pad or the copper it dumps heat into, stitched to the ground or the plane on the other side, sized and counted from its dissipation; the AI reviews the plan and the binary lands it.++**Clip: thermal-vias, visit 2, still recording (started 2026-11-09T06:17:22Z); it appears here when the step ends.**++**Screenshot: the board when thermal-vias, visit 2 began.**++![the board when thermal-vias, visit 2 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-thermal-vias-2-start.png)+ ## Plan usage, the second cost line  Percent of each plan limit used, as the provider reports it, at the start of the run and at its end.

⋯ 1 unchanged line ⋯

⋯ 1 unchanged line ⋯

⋯ 1 unchanged line ⋯

⋯ 1 unchanged line ⋯