LW A6SG-V2BA-FK0PN0

{
 "schema": "adom.pads/1",
 "slug": "lw-a6sg-v2ba-fk0pn0",
 "footprint": "LED_SIDELED_LW-A6SG",
 "generated_from": {
  "footprint": "datasheet:[email protected]",
  "pins": "page.json:component.pins",
  "overrides": null
 },
 "pin1": {
  "pad": "1",
  "at": [
   1.25,
   0.0
  ],
  "corner": "right",
  "source": "vendor-cad-cathode-marking",
  "derived_from": "LW_A6SG_20091210_geometry.STEP"
 },
 "pad_count": 2,
 "symbol_pins": [
  "1",
  "2"
 ],
 "paste_apertures": 0,
 "issues": [],
 "pads": [
  {
   "pad": "1",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    1.25,
    0.0
   ],
   "rot": 0.0,
   "size": [
    1.2,
    3.0
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "1",
   "name": "K",
   "type": "passive",
   "description": "Cathode. On this footprint - a view looking DOWN at the board - the cathode is the RIGHT-hand pad when the lens faces up the page. The datasheet's front view (p.14) labels the LEFT lead 'Cathode', but a front view and a top view see the lead axis from opposite sides. The vendor CAD settles it: the cathode marking on the top face sits over this pad. Return LED current here.",
   "is_pin1": true,
   "source": {
    "geometry": "LW A6SG binning FK0PN0 v1.1, p.15 Recommended Solder Pad; polarity and body outline from LW_A6SG_20091210_geometry.STEP",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "2",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -1.25,
    0.0
   ],
   "rot": 0.0,
   "size": [
    1.2,
    3.0
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "2",
   "name": "A",
   "type": "passive",
   "description": "Anode. Drive at IF = 20 mA typical, 5 mA min to 50 mA max (p.3). VF is 2.90 V min / 3.00 V typ / 3.50 V max at 20 mA (p.4), so size the series resistor from VF max, not typ. Never connect to a fixed supply without current limiting.",
   "is_pin1": false,
   "source": {
    "geometry": "LW A6SG binning FK0PN0 v1.1, p.15 Recommended Solder Pad; polarity and body outline from LW_A6SG_20091210_geometry.STEP",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  }
 ]
}