Generated by kicad-footprint-generator · KiCad file format 20260206
ZL40241LDG1
Microchip Tech · Clock Buffers/Drivers/Distributions · QFN-32(5x5)
ZL40241LDG1 from Microchip Tech, in a QFN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT0 | output | Ultra-low additive jitter LVCMOS output 0, 0 to 200MHz. |
| 2 | VDDO | power_in | Positive supply for LVCMOS outputs, connect 3.3V, 2.5V, 1.8V or 1.5V. |
| 3 | OUT1 | output | Ultra-low additive jitter LVCMOS output 1, 0 to 200MHz. |
| 4 | GND | power_in | Ground, connect to ground. |
| 5 | OUT2 | output | Ultra-low additive jitter LVCMOS output 2, 0 to 200MHz. |
| 6 | VDDO | power_in | Positive supply for LVCMOS outputs, connect 3.3V, 2.5V, 1.8V or 1.5V. |
| 7 | OUT3 | output | Ultra-low additive jitter LVCMOS output 3, 0 to 200MHz. |
| 8 | OUT4 | output | Ultra-low additive jitter LVCMOS output 4, 0 to 200MHz. |
| 9 | GND | power_in | Ground, connect to ground. |
| 10 | VDD | power_in | Positive supply voltage, connect to 3.3V or 2.5V; must be higher than or equal to VDDO. |
| 11 | XIN | input | Crystal oscillator input or crystal bypass/overdrive input; pull down or connect to ground if the crystal oscillator is not used. |
| 12 | XOUT | output | Crystal oscillator output. |
| 13 | IN0_p | input | Non-inverting differential or single-ended reference input 0, 0Hz to 200MHz, with internal 30k pull-down. |
| 14 | IN0_n | input | Inverting reference input 0, 0Hz to 200MHz, biased at VDD/2 by 60k pull-up and pull-down resistors. |
| 15 | GND | power_in | Ground, connect to ground. |
| 16 | GND | power_in | Ground, connect to ground. |
| 17 | OUT5 | output | Ultra-low additive jitter LVCMOS output 5, 0 to 200MHz. |
| 18 | OUT6 | output | Ultra-low additive jitter LVCMOS output 6, 0 to 200MHz. |
| 19 | VDDO | power_in | Positive supply for LVCMOS outputs, connect 3.3V, 2.5V, 1.8V or 1.5V. |
| 20 | OUT7 | output | Ultra-low additive jitter LVCMOS output 7, 0 to 200MHz. |
| 21 | GND | power_in | Ground, connect to ground. |
| 22 | OUT8 | output | Ultra-low additive jitter LVCMOS output 8, 0 to 200MHz. |
| 23 | VDDO | power_in | Positive supply for LVCMOS outputs, connect 3.3V, 2.5V, 1.8V or 1.5V. |
| 24 | OUT9 | output | Ultra-low additive jitter LVCMOS output 9, 0 to 200MHz. |
| 25 | GND | power_in | Ground, connect to ground. |
| 26 | GND | power_in | Ground, connect to ground. |
| 27 | IN1_n | input | Inverting reference input 1, 0Hz to 200MHz, biased at VDD/2 by 60k pull-up and pull-down resistors. |
| 28 | IN1_p | input | Non-inverting differential or single-ended reference input 1, 0Hz to 200MHz, with internal 30k pull-down. |
| 29 | IN_SEL1 | input | Input select bit 1 with internal pull-down; with IN_SEL0 selects IN0, IN1, crystal oscillator/overdrive or crystal bypass. |
| 30 | IN_SEL0 | input | Input select bit 0 with internal pull-down; with IN_SEL1 selects IN0, IN1, crystal oscillator/overdrive or crystal bypass. |
| 31 | OE | input | Output enable with internal pull-down; outputs are enabled when high and high-Z when low. |
| 32 | GND | power_in | Ground, connect to ground. |
| 33 | E-Pad | power_in | Exposed ground pad (3.10 x 3.10 mm), connect to ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | QFN-32(5x5) |
| Category | Clock And Timing |
| Pins | 33 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (3.3V) | VDD/VDDO | -0.5 | 4.6 | V | 16 | ||
| Supply voltage (2.5V) | VDD/VDDO | -0.5 | 4.6 | V | 16 | ||
| Supply voltage (1.8V) | VDDO | -0.5 | 2.5 | V | 16 | ||
| Supply voltage (1.5V) | VDDO | -0.5 | 2 | V | 16 | ||
| Storage temperature | TST | -55 | 125 | °C | 16 | ||
| Supply voltage 3.3V | VDD/VDDO | 3.135 | 3.3 | 3.465 | V | 16 | |
| Supply voltage 2.5V | VDD/VDDO | 2.375 | 2.5 | 2.625 | V | 16 | |
| Supply voltage 1.8V | VDDO | 1.6 | 1.8 | 2 | V | 16 | |
| Supply voltage 1.5V | VDDO | 1.35 | 1.5 | 1.65 | V | 16 | |
| Operating temperature | TA | -40 | 25 | 85 | °C | 16 | |
| Input voltage | VDD-IN | -0.3 | V | max printed as VDD + 0.3 V | 16 | ||
| Static device current 3.3V | Is_3.3V | 15 | 18 | mA | VDD= 3.465V | 16 | |
| Static device current 2.5V | Is_2.5V | 12 | 15 | mA | VDD = 2.625V | 16 | |
| Device current with 25MHz XTAL, 3.3V | IDD_XTAL_3.3V | 24 | 27 | mA | VDD= 3.465V | 16 | |
| Device current with 25MHz XTAL, 2.5V | IDD_XTAL_2.5V | 18 | 20 | mA | VDD= 2.625V | 16 | |
| Dynamic current per output, drive 1, 3.3V | IDD_3.3V | 4.2 | 4.7 | mA | f = 100MHz, VDDO= 3.465V | 16 | |
| Dynamic current per output, drive 1, 2.5V | IDD_2.5V | 3 | 3.5 | mA | f = 100MHz, VDDO= 2.625V | 16 | |
| Dynamic current per output, drive 0, 3.3V | IDD_3.3V | 2.3 | 3 | mA | f = 100MHz, VDDO= 3.465V | 16 | |
| Common output current 3.3V | IDDC_3.3V | 3.8 | 8 | mA | VDDO= 3.465V | 16 | |
| Common output current 2.5V | IDDC_2.5V | 1.9 | 3.3 | mA | VDDO= 2.625V | 16 | |
| CMOS high-level input voltage for SEL0/1 and OE | VCIH | 1.2 | V | 17 | |||
| CMOS low-level input voltage for SEL0/1 and OE | VCIL | 0.45 | V | 17 | |||
| CMOS input leakage current for SEL0/1 and OE | IIL | -40 | 10 | µA | VI = VDD or 0 V | 17 | |
| Differential input common mode voltage | VCM | 0.5 | V | max printed as VDD, 0.85 V | 17 | ||
| Differential input voltage difference | VID | 0.15 | 1.3 | V | 17 | ||
| Differential input leakage current | IIL | -200 | 100 | µA | VI = VDD or 0 V | 17 | |
| Single ended input high voltage (3.3V) | VSIH | 2 | V | VDD = 3.3V+/-5% | 17 | ||
| Single ended input high voltage (2.5V) | VSIH | 1.6 | V | VDD = 2.5V+/-5% | 17 | ||
| Single ended input low voltage (3.3V) | VSIL | -0.3 | 1.3 | V | VDD = 3.3V+/-5% | 17 | |
| Single ended input low voltage (2.5V) | VSIL | -0.3 | 0.9 | V | VDD = 2.5V+/-5% | 17 | |
| Input frequency | fIN | 0 | 200 | MHz | 17 | ||
| Input duty cycle | dc | 35 | 65 | % | @200MHz; for lower frequencies duty cycle can be scaled proportionally | 17 | |
| Input slew rate | slew | 2 | V/ns | 17 | |||
| Crystal frequency | f | 8 | 60 | MHz | 17 | ||
| Frequency in overdrive mode | fOV | 0.1 | 200 | MHz | Functional but may not meet AC parameters | 17 | |
| Output slew rate 3.3V | tr, tf | 3.19 | 5.14 | 6.33 | V/ns | 20% to 80%, VDDO = 3.3V±5% | 18 |
| Output slew rate 2.5V | tr, tf | 1.72 | 3.74 | 4.61 | V/ns | 20% to 80%, VDDO = 2.5V±5% | 18 |
| Output slew rate 1.8V | tr, tf | 1.64 | 2.52 | 3.32 | V/ns | 20% to 80%, VDDO = 1.8V±10% | 18 |
| Output slew rate 1.5V | tr, tf | 1.2 | 1.96 | 2.54 | V/ns | 20% to 80%, VDDO = 1.5V±10% | 18 |
| Output frequency | FO | 0 | 200 | MHz | 18 | ||
| Output duty cycle | 50.26 | 53.18 | % | Input. duty-cycle 50% | 18 | ||
| Input to output delay 3.3V | tIOD | 1.15 | 2.09 | 2.54 | ns | VDD = 3.3V | 18 |
| Input to output delay 2.5V | tIOD | 1.57 | 2.27 | 2.77 | ns | VDD = 2.5V | 18 |
| Output to output skew | tOOSK | 27 | ps | 18 | |||
| Junction to ambient thermal resistance | θJA | 26.8 | °C/W | still air | 20 | ||
| Maximum junction temperature | TJMAX | 125 | °C | 20 | |||
| Junction to case thermal resistance | θJC | 19.5 | °C/W | 20 |
CAD (KiCad official)
- Symbol:
ZL40241LDG1 - Footprint:
Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm - 3D model: QFN-32(5x5) (KiCad packages3D, STEP)
- 3D model files:
zl40241ldg1-etched.step/zl40241ldg1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);zl40241ldg1.step/zl40241ldg1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (23 pp, sha256
ea9ba828266e317f, retrieved 2026-10-31, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).