Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

ZL40241LDG1

Microchip Tech · Clock Buffers/Drivers/Distributions · QFN-32(5x5)

ZL40241LDG1 from Microchip Tech, in a QFN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT0 output Ultra-low additive jitter LVCMOS output 0, 0 to 200MHz.
2 VDDO power_in Positive supply for LVCMOS outputs, connect 3.3V, 2.5V, 1.8V or 1.5V.
3 OUT1 output Ultra-low additive jitter LVCMOS output 1, 0 to 200MHz.
4 GND power_in Ground, connect to ground.
5 OUT2 output Ultra-low additive jitter LVCMOS output 2, 0 to 200MHz.
6 VDDO power_in Positive supply for LVCMOS outputs, connect 3.3V, 2.5V, 1.8V or 1.5V.
7 OUT3 output Ultra-low additive jitter LVCMOS output 3, 0 to 200MHz.
8 OUT4 output Ultra-low additive jitter LVCMOS output 4, 0 to 200MHz.
9 GND power_in Ground, connect to ground.
10 VDD power_in Positive supply voltage, connect to 3.3V or 2.5V; must be higher than or equal to VDDO.
11 XIN input Crystal oscillator input or crystal bypass/overdrive input; pull down or connect to ground if the crystal oscillator is not used.
12 XOUT output Crystal oscillator output.
13 IN0_p input Non-inverting differential or single-ended reference input 0, 0Hz to 200MHz, with internal 30k pull-down.
14 IN0_n input Inverting reference input 0, 0Hz to 200MHz, biased at VDD/2 by 60k pull-up and pull-down resistors.
15 GND power_in Ground, connect to ground.
16 GND power_in Ground, connect to ground.
17 OUT5 output Ultra-low additive jitter LVCMOS output 5, 0 to 200MHz.
18 OUT6 output Ultra-low additive jitter LVCMOS output 6, 0 to 200MHz.
19 VDDO power_in Positive supply for LVCMOS outputs, connect 3.3V, 2.5V, 1.8V or 1.5V.
20 OUT7 output Ultra-low additive jitter LVCMOS output 7, 0 to 200MHz.
21 GND power_in Ground, connect to ground.
22 OUT8 output Ultra-low additive jitter LVCMOS output 8, 0 to 200MHz.
23 VDDO power_in Positive supply for LVCMOS outputs, connect 3.3V, 2.5V, 1.8V or 1.5V.
24 OUT9 output Ultra-low additive jitter LVCMOS output 9, 0 to 200MHz.
25 GND power_in Ground, connect to ground.
26 GND power_in Ground, connect to ground.
27 IN1_n input Inverting reference input 1, 0Hz to 200MHz, biased at VDD/2 by 60k pull-up and pull-down resistors.
28 IN1_p input Non-inverting differential or single-ended reference input 1, 0Hz to 200MHz, with internal 30k pull-down.
29 IN_SEL1 input Input select bit 1 with internal pull-down; with IN_SEL0 selects IN0, IN1, crystal oscillator/overdrive or crystal bypass.
30 IN_SEL0 input Input select bit 0 with internal pull-down; with IN_SEL1 selects IN0, IN1, crystal oscillator/overdrive or crystal bypass.
31 OE input Output enable with internal pull-down; outputs are enabled when high and high-Z when low.
32 GND power_in Ground, connect to ground.
33 E-Pad power_in Exposed ground pad (3.10 x 3.10 mm), connect to ground.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package QFN-32(5x5)
Category Clock And Timing
Pins 33

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (3.3V) VDD/VDDO -0.5 4.6 V 16
Supply voltage (2.5V) VDD/VDDO -0.5 4.6 V 16
Supply voltage (1.8V) VDDO -0.5 2.5 V 16
Supply voltage (1.5V) VDDO -0.5 2 V 16
Storage temperature TST -55 125 °C 16
Supply voltage 3.3V VDD/VDDO 3.135 3.3 3.465 V 16
Supply voltage 2.5V VDD/VDDO 2.375 2.5 2.625 V 16
Supply voltage 1.8V VDDO 1.6 1.8 2 V 16
Supply voltage 1.5V VDDO 1.35 1.5 1.65 V 16
Operating temperature TA -40 25 85 °C 16
Input voltage VDD-IN -0.3 V max printed as VDD + 0.3 V 16
Static device current 3.3V Is_3.3V 15 18 mA VDD= 3.465V 16
Static device current 2.5V Is_2.5V 12 15 mA VDD = 2.625V 16
Device current with 25MHz XTAL, 3.3V IDD_XTAL_3.3V 24 27 mA VDD= 3.465V 16
Device current with 25MHz XTAL, 2.5V IDD_XTAL_2.5V 18 20 mA VDD= 2.625V 16
Dynamic current per output, drive 1, 3.3V IDD_3.3V 4.2 4.7 mA f = 100MHz, VDDO= 3.465V 16
Dynamic current per output, drive 1, 2.5V IDD_2.5V 3 3.5 mA f = 100MHz, VDDO= 2.625V 16
Dynamic current per output, drive 0, 3.3V IDD_3.3V 2.3 3 mA f = 100MHz, VDDO= 3.465V 16
Common output current 3.3V IDDC_3.3V 3.8 8 mA VDDO= 3.465V 16
Common output current 2.5V IDDC_2.5V 1.9 3.3 mA VDDO= 2.625V 16
CMOS high-level input voltage for SEL0/1 and OE VCIH 1.2 V 17
CMOS low-level input voltage for SEL0/1 and OE VCIL 0.45 V 17
CMOS input leakage current for SEL0/1 and OE IIL -40 10 µA VI = VDD or 0 V 17
Differential input common mode voltage VCM 0.5 V max printed as VDD, 0.85 V 17
Differential input voltage difference VID 0.15 1.3 V 17
Differential input leakage current IIL -200 100 µA VI = VDD or 0 V 17
Single ended input high voltage (3.3V) VSIH 2 V VDD = 3.3V+/-5% 17
Single ended input high voltage (2.5V) VSIH 1.6 V VDD = 2.5V+/-5% 17
Single ended input low voltage (3.3V) VSIL -0.3 1.3 V VDD = 3.3V+/-5% 17
Single ended input low voltage (2.5V) VSIL -0.3 0.9 V VDD = 2.5V+/-5% 17
Input frequency fIN 0 200 MHz 17
Input duty cycle dc 35 65 % @200MHz; for lower frequencies duty cycle can be scaled proportionally 17
Input slew rate slew 2 V/ns 17
Crystal frequency f 8 60 MHz 17
Frequency in overdrive mode fOV 0.1 200 MHz Functional but may not meet AC parameters 17
Output slew rate 3.3V tr, tf 3.19 5.14 6.33 V/ns 20% to 80%, VDDO = 3.3V±5% 18
Output slew rate 2.5V tr, tf 1.72 3.74 4.61 V/ns 20% to 80%, VDDO = 2.5V±5% 18
Output slew rate 1.8V tr, tf 1.64 2.52 3.32 V/ns 20% to 80%, VDDO = 1.8V±10% 18
Output slew rate 1.5V tr, tf 1.2 1.96 2.54 V/ns 20% to 80%, VDDO = 1.5V±10% 18
Output frequency FO 0 200 MHz 18
Output duty cycle 50.26 53.18 % Input. duty-cycle 50% 18
Input to output delay 3.3V tIOD 1.15 2.09 2.54 ns VDD = 3.3V 18
Input to output delay 2.5V tIOD 1.57 2.27 2.77 ns VDD = 2.5V 18
Output to output skew tOOSK 27 ps 18
Junction to ambient thermal resistance θJA 26.8 °C/W still air 20
Maximum junction temperature TJMAX 125 °C 20
Junction to case thermal resistance θJC 19.5 °C/W 20

CAD (KiCad official)

  • Symbol: ZL40241LDG1
  • Footprint: Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm
  • 3D model: QFN-32(5x5) (KiCad packages3D, STEP)
  • 3D model files: zl40241ldg1-etched.step / zl40241ldg1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); zl40241ldg1.step / zl40241ldg1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (23 pp, sha256 ea9ba828266e317f, retrieved 2026-10-31, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF