Generated by kicad-footprint-generator · KiCad file format 20260206
ZL40213LDF1
Microchip Tech · Clock Buffers, Drivers · VQFN-16-EP(3x3)
ZL40213LDF1 from Microchip Tech, in a VQFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | clk_p | input | Differential (or single-ended) clock input, positive side, with on-chip 50 Ohm termination to the vt center tap. |
| 2 | vt | passive | On-chip input termination node, the center tap between the internal 50 Ohm termination resistors. |
| 3 | ctrl | input | Digital control for on-chip input termination: 0 selects DC coupled modes, 1 selects AC coupled differential modes; internally pulled down to GND. |
| 4 | clk_n | input | Differential (or single-ended) clock input, negative side, with on-chip 50 Ohm termination to the vt center tap. |
| 5 | gnd | power_in | Ground, 0 V. |
| 6 | NC | unconnected | No connection; leave unconnected. |
| 7 | NC | unconnected | No connection; leave unconnected. |
| 8 | vdd | power_in | Positive supply voltage, 2.5 V or 3.3 V nominal (2.5 V +/-5% or 3.3 V +/-5%). |
| 9 | out1_n | output | LVDS differential output 1, negative side, operating up to 750 MHz. |
| 10 | out1_p | output | LVDS differential output 1, positive side, operating up to 750 MHz. |
| 11 | out0_n | output | LVDS differential output 0, negative side, operating up to 750 MHz. |
| 12 | out0_p | output | LVDS differential output 0, positive side, operating up to 750 MHz. |
| 13 | vdd | power_in | Positive supply voltage, 2.5 V or 3.3 V nominal (2.5 V +/-5% or 3.3 V +/-5%). |
| 14 | NC | unconnected | No connection; leave unconnected. |
| 15 | NC | unconnected | No connection; leave unconnected. |
| 16 | gnd | power_in | Ground, 0 V. |
| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | VQFN-16-EP(3x3) |
| Category | Clock and Timing |
| Pins | 17 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage 2.5 V mode | VDD25 | 2.375 | 2.5 | 2.625 | V | 15 | |
| Supply voltage 3.3 V mode | VDD33 | 3.135 | 3.3 | 3.465 | V | 15 | |
| Operating temperature | TA | -40 | 25 | 85 | °C | 15 | |
| Supply voltage | VDD_R | -0.5 | 4.6 | V | 15 | ||
| Voltage on any digital pin | VPIN | -0.5 | V | max printed as VDD | 15 | ||
| Soldering temperature | T | 260 | °C | 15 | |||
| Storage temperature | TST | -55 | 125 | °C | 15 | ||
| Junction temperature | Tj | 125 | °C | 15 | |||
| CMOS control logic input leakage current | IIL | 1 | µA | VI = VDD or 0 V | 15 | ||
| Differential input common mode voltage | VICM | 1.1 | 1.6 | V | For VDD = 2.5 | 15 | |
| Differential input common mode voltage | VICM | 1.1 | 2 | V | For VDD = 3.3 | 15 | |
| LVDS differential input voltage | VID | 0.25 | 1 | V | 15 | ||
| Differential input resistance | VIR | 80 | 100 | 120 | ohm | 15 | |
| LVDS output differential voltage | VOD | 0.25 | 0.3 | 0.4 | V | measured from 125 MHz to 750 MHz | 16 |
| LVDS output common mode voltage | VCM | 1.1 | 1.25 | 1.375 | V | 16 | |
| Maximum operating frequency | 1/tp | 750 | MHz | 16 | |||
| Input to output clock propagation delay | tpd | 0 | 1 | 2 | ns | 16 | |
| Output to output skew | tout2out | 50 | 100 | ps | 16 | ||
| Part to part output skew | tpart2part | 80 | 300 | ps | 16 | ||
| Output clock duty cycle degradation | tPWH/tPWL | -5 | 0 | 5 | % | 16 | |
| LVDS output slew rate | rsl | 0.55 | V/ns | 16 | |||
| Supply current, LVDS drivers loaded | Idd_load | 44 | mA | all outputs are active | 15 | ||
| Junction to ambient thermal resistance | ΘJA | 67.9 | °C/W | Still Air | 19 | ||
| Junction to ambient thermal resistance | ΘJA | 61.6 | °C/W | 1 m/s | 19 | ||
| Junction to ambient thermal resistance | ΘJA | 58.1 | °C/W | 2 m/s | 19 | ||
| Junction to case thermal resistance | ΘJC | 44.1 | °C/W | Still Air | 19 | ||
| Junction to board thermal resistance | ΘJB | 23.2 | °C/W | Still Air | 19 | ||
| Maximum junction temperature | Tjmax | 125 | °C | 19 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | ZL40213LDF1 16 Pin QFN Tape and Reel Matte Tin | 1 |
CAD (KiCad official)
- Symbol:
ZL40213LDF1 - Footprint:
Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm - 3D model: VQFN-16-EP(3x3) (KiCad packages3D, STEP)
- 3D model files:
zl40213ldf1-etched.step/zl40213ldf1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);zl40213ldf1.step/zl40213ldf1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (21 pp, sha256
f99331dc5d4d446e, retrieved 2026-10-26, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).