Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

ZL40213LDF1

Microchip Tech · Clock Buffers, Drivers · VQFN-16-EP(3x3)

ZL40213LDF1 from Microchip Tech, in a VQFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 clk_p input Differential (or single-ended) clock input, positive side, with on-chip 50 Ohm termination to the vt center tap.
2 vt passive On-chip input termination node, the center tap between the internal 50 Ohm termination resistors.
3 ctrl input Digital control for on-chip input termination: 0 selects DC coupled modes, 1 selects AC coupled differential modes; internally pulled down to GND.
4 clk_n input Differential (or single-ended) clock input, negative side, with on-chip 50 Ohm termination to the vt center tap.
5 gnd power_in Ground, 0 V.
6 NC unconnected No connection; leave unconnected.
7 NC unconnected No connection; leave unconnected.
8 vdd power_in Positive supply voltage, 2.5 V or 3.3 V nominal (2.5 V +/-5% or 3.3 V +/-5%).
9 out1_n output LVDS differential output 1, negative side, operating up to 750 MHz.
10 out1_p output LVDS differential output 1, positive side, operating up to 750 MHz.
11 out0_n output LVDS differential output 0, negative side, operating up to 750 MHz.
12 out0_p output LVDS differential output 0, positive side, operating up to 750 MHz.
13 vdd power_in Positive supply voltage, 2.5 V or 3.3 V nominal (2.5 V +/-5% or 3.3 V +/-5%).
14 NC unconnected No connection; leave unconnected.
15 NC unconnected No connection; leave unconnected.
16 gnd power_in Ground, 0 V.
17 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package VQFN-16-EP(3x3)
Category Clock and Timing
Pins 17

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage 2.5 V mode VDD25 2.375 2.5 2.625 V 15
Supply voltage 3.3 V mode VDD33 3.135 3.3 3.465 V 15
Operating temperature TA -40 25 85 °C 15
Supply voltage VDD_R -0.5 4.6 V 15
Voltage on any digital pin VPIN -0.5 V max printed as VDD 15
Soldering temperature T 260 °C 15
Storage temperature TST -55 125 °C 15
Junction temperature Tj 125 °C 15
CMOS control logic input leakage current IIL 1 µA VI = VDD or 0 V 15
Differential input common mode voltage VICM 1.1 1.6 V For VDD = 2.5 15
Differential input common mode voltage VICM 1.1 2 V For VDD = 3.3 15
LVDS differential input voltage VID 0.25 1 V 15
Differential input resistance VIR 80 100 120 ohm 15
LVDS output differential voltage VOD 0.25 0.3 0.4 V measured from 125 MHz to 750 MHz 16
LVDS output common mode voltage VCM 1.1 1.25 1.375 V 16
Maximum operating frequency 1/tp 750 MHz 16
Input to output clock propagation delay tpd 0 1 2 ns 16
Output to output skew tout2out 50 100 ps 16
Part to part output skew tpart2part 80 300 ps 16
Output clock duty cycle degradation tPWH/tPWL -5 0 5 % 16
LVDS output slew rate rsl 0.55 V/ns 16
Supply current, LVDS drivers loaded Idd_load 44 mA all outputs are active 15
Junction to ambient thermal resistance ΘJA 67.9 °C/W Still Air 19
Junction to ambient thermal resistance ΘJA 61.6 °C/W 1 m/s 19
Junction to ambient thermal resistance ΘJA 58.1 °C/W 2 m/s 19
Junction to case thermal resistance ΘJC 44.1 °C/W Still Air 19
Junction to board thermal resistance ΘJB 23.2 °C/W Still Air 19
Maximum junction temperature Tjmax 125 °C 19

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin ZL40213LDF1 16 Pin QFN Tape and Reel Matte Tin 1

CAD (KiCad official)

  • Symbol: ZL40213LDF1
  • Footprint: Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm
  • 3D model: VQFN-16-EP(3x3) (KiCad packages3D, STEP)
  • 3D model files: zl40213ldf1-etched.step / zl40213ldf1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); zl40213ldf1.step / zl40213ldf1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (21 pp, sha256 f99331dc5d4d446e, retrieved 2026-10-26, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF