Generated by kicad-footprint-generator · KiCad file format 20260206
ZJR1003-3AUABR
ZJW · Voltage References · MSOP-8
ZJR1003-3AUABR from ZJW, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NIC | unconnected | No Internal Connection; the pin has no internal connection. |
| 2 | VIN | power_in | Input voltage; supply must be at least 300 mV above VOUT up to 5.5 V (absolute maximum -0.2 V to 6 V). |
| 3 | ENABLE | input | Enable; drive high (>2 V) to enable the device and low (<0.8 V) to shut down, with a weak internal pull-up if left unconnected. |
| 4 | GND | power_in | Ground. |
| 5 | NIC | unconnected | No Internal Connection; the pin has no internal connection. |
| 6 | VOUT | power_out | Voltage output connected to the load; needs a 0.1 µF to 10 µF output capacitor to GND and has 16 mA minimum drive. |
| 7 | NIC | unconnected | No Internal Connection; the pin has no internal connection. |
| 8 | NIC | unconnected | No Internal Connection; the pin has no internal connection. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ZJW |
| Package | MSOP-8 |
| Category | Power Management |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage (ZJR1003-3) | VOUT | 3 | V | VIN=VOUT+0.3V, ILOAD=0, CL=0.1µF, TA=25°C | 7 | ||
| Initial Accuracy | -0.05 | 0.05 | % | 7 | |||
| Temperature Coefficient (A Grade) | TCVOUT | 8 | ppm/°C | A Grade | 7 | ||
| Line Regulation (Voltage Regulation) | 2 | 5 | ppm/V | 7 | |||
| Line Regulation over temperature | 10 | ppm/V | full temperature range | 7 | |||
| Load Regulation | 1.5 | 6 | ppm/mA | -10 mA < ILOAD < 10 mA | 7 | ||
| Load Regulation over temperature | 10 | ppm/mA | -10 mA < ILOAD < 10 mA, full temperature range | 7 | |||
| Supply Voltage | VIN | 5.5 | V | ILOAD= 5 mA, output voltage error < 0.1 %; min printed as VOUT +0.3 | 7 | ||
| Supply Current | 130 | µA | 7 | ||||
| Shutdown Current | 3 | µA | 7 | ||||
| Dropout Voltage | 5 | mV | ILOAD = 0 | 7 | |||
| Dropout Voltage | 50 | mV | ILOAD = 5 mA | 7 | |||
| Enable Pin Input Current | -1 | 1 | µA | 7 | |||
| Enable Logic High Voltage | 2 | V | 7 | ||||
| Enable Logic Low Voltage | 0.8 | V | 7 | ||||
| Short-Circuit Current | 16 | mA | VOUT = GND / VIN; 20 mA also printed | 7 | |||
| Voltage Noise | en p-p | 2.5 | ppm_peak-to-peak | 0.1 Hz to 10 Hz | 7 | ||
| Voltage Noise Density (ZJR1003-3) | en | 250 | nV/√Hz | f = 1 kHz | 7 | ||
| Ripple Rejection Ratio | -95 | dB | Frequency = 60 Hz | 7 | |||
| Turn-on Settling Time | 220 | µs | Stable to 0.1 %, CL = 0.1 µF | 7 | |||
| Long-Term Stability (MSOP-8) | 55 | ppm/1000 hours | 1000 hours, MSOP-8 | 7 | |||
| Specified Temperature Range | -40 | 125 | °C | Specified Temperature Range | 7 | ||
| Operating Temperature Range | -55 | 125 | °C | Operating Temperature Range (Specifications table) | 7 | ||
| Input Voltage | -0.2 | 6 | V | 6 | |||
| Output Short-Circuit Current to GND | -30 | 30 | mA | 6 | |||
| Operating Temperature Range (abs max) | -40 | 125 | °C | 6 | |||
| Storage Temperature Range | -65 | 150 | °C | 6 | |||
| Junction Temperature Range | -65 | 150 | °C | 6 | |||
| Maximum Reflow Temperature | 260 | °C | 6 | ||||
| Lead Temperature (Soldering, 10 sec) | 300 | °C | 6 | ||||
| ESD Human Body Model | HBM | 8 | kV | 6 | |||
| ESD Charging Device Model | CDM | 1 | kV | 6 | |||
| Thermal Resistance Junction-to-Ambient MSOP-8 | θJA | 190 | °C/W | MSOP-8 | 6 | ||
| Thermal Resistance Junction-to-Case MSOP-8 | θJC | 44 | °C/W | MSOP-8 | 6 |
CAD (KiCad official)
- Symbol:
ZJR1003-3AUABR - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
zjr1003-3auabr-etched.step/zjr1003-3auabr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);zjr1003-3auabr.step/zjr1003-3auabr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ZJW datasheet (23 pp, sha256
ab8c42eb95a481ad, retrieved 2026-10-26, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).