Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

ZJR1003-3AUABR

ZJW · Voltage References · MSOP-8

ZJR1003-3AUABR from ZJW, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NIC unconnected No Internal Connection; the pin has no internal connection.
2 VIN power_in Input voltage; supply must be at least 300 mV above VOUT up to 5.5 V (absolute maximum -0.2 V to 6 V).
3 ENABLE input Enable; drive high (>2 V) to enable the device and low (<0.8 V) to shut down, with a weak internal pull-up if left unconnected.
4 GND power_in Ground.
5 NIC unconnected No Internal Connection; the pin has no internal connection.
6 VOUT power_out Voltage output connected to the load; needs a 0.1 µF to 10 µF output capacitor to GND and has 16 mA minimum drive.
7 NIC unconnected No Internal Connection; the pin has no internal connection.
8 NIC unconnected No Internal Connection; the pin has no internal connection.

Key specifications

Parameter Value
Manufacturer ZJW
Package MSOP-8
Category Power Management
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage (ZJR1003-3) VOUT 3 V VIN=VOUT+0.3V, ILOAD=0, CL=0.1µF, TA=25°C 7
Initial Accuracy -0.05 0.05 % 7
Temperature Coefficient (A Grade) TCVOUT 8 ppm/°C A Grade 7
Line Regulation (Voltage Regulation) 2 5 ppm/V 7
Line Regulation over temperature 10 ppm/V full temperature range 7
Load Regulation 1.5 6 ppm/mA -10 mA < ILOAD < 10 mA 7
Load Regulation over temperature 10 ppm/mA -10 mA < ILOAD < 10 mA, full temperature range 7
Supply Voltage VIN 5.5 V ILOAD= 5 mA, output voltage error < 0.1 %; min printed as VOUT +0.3 7
Supply Current 130 µA 7
Shutdown Current 3 µA 7
Dropout Voltage 5 mV ILOAD = 0 7
Dropout Voltage 50 mV ILOAD = 5 mA 7
Enable Pin Input Current -1 1 µA 7
Enable Logic High Voltage 2 V 7
Enable Logic Low Voltage 0.8 V 7
Short-Circuit Current 16 mA VOUT = GND / VIN; 20 mA also printed 7
Voltage Noise en p-p 2.5 ppm_peak-to-peak 0.1 Hz to 10 Hz 7
Voltage Noise Density (ZJR1003-3) en 250 nV/√Hz f = 1 kHz 7
Ripple Rejection Ratio -95 dB Frequency = 60 Hz 7
Turn-on Settling Time 220 µs Stable to 0.1 %, CL = 0.1 µF 7
Long-Term Stability (MSOP-8) 55 ppm/1000 hours 1000 hours, MSOP-8 7
Specified Temperature Range -40 125 °C Specified Temperature Range 7
Operating Temperature Range -55 125 °C Operating Temperature Range (Specifications table) 7
Input Voltage -0.2 6 V 6
Output Short-Circuit Current to GND -30 30 mA 6
Operating Temperature Range (abs max) -40 125 °C 6
Storage Temperature Range -65 150 °C 6
Junction Temperature Range -65 150 °C 6
Maximum Reflow Temperature 260 °C 6
Lead Temperature (Soldering, 10 sec) 300 °C 6
ESD Human Body Model HBM 8 kV 6
ESD Charging Device Model CDM 1 kV 6
Thermal Resistance Junction-to-Ambient MSOP-8 θJA 190 °C/W MSOP-8 6
Thermal Resistance Junction-to-Case MSOP-8 θJC 44 °C/W MSOP-8 6

CAD (KiCad official)

  • Symbol: ZJR1003-3AUABR
  • Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
  • 3D model: MSOP-8 (KiCad packages3D, STEP)
  • 3D model files: zjr1003-3auabr-etched.step / zjr1003-3auabr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); zjr1003-3auabr.step / zjr1003-3auabr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: ZJW datasheet (23 pp, sha256 ab8c42eb95a481ad, retrieved 2026-10-26, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF