ZJR1002-9BUTBR

{
  "slug": "zjr1002-9butbr",
  "version": "0.1.0",
  "type": "component",
  "description": "ZJW Voltage Reference, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "zjr1002-9butbr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "zjr1002-9butbr.kicad_sym",
    "zjr1002-9butbr.kicad_mod",
    "zjr1002-9butbr.glb",
    "zjr1002-9butbr.step",
    "zjr1002-9butbr.lbr",
    "docs/hero.png",
    "docs/zjr1002-9butbr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "zjr1002-9butbr-hero.glb",
    "zjr1002-9butbr-hero.overlay.json",
    "zjr1002-9butbr-etched.glb"
  ],
  "component": {
    "mpn": "ZJR1002-9BUTBR",
    "manufacturer": "ZJW",
    "package": "SOT-23-6",
    "pin_count": 6,
    "category": "Power Management (PMIC)",
    "subcategory": "Voltage Reference",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590917047130148864",
    "parts": {
      "symbol": "zjr1002-9butbr.kicad_sym",
      "footprint": "zjr1002-9butbr.kicad_mod",
      "model_3d": "zjr1002-9butbr-hero.glb",
      "model_3d_plain": "zjr1002-9butbr-etched.glb",
      "model_3d_step": "zjr1002-9butbr-etched.step",
      "model_3d_step_plain": "zjr1002-9butbr.step",
      "lbr": "zjr1002-9butbr.lbr"
    },
    "distributor_links": {
      "lcsc": "C20627275"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T23:59:43Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "GNDF",
        "type": "power_in",
        "description": "Ground Force pin, the ground connection of the force path for the reference output; the datasheet gives no further electrical limits for this pin."
      },
      {
        "number": "2",
        "name": "GNDS",
        "type": "power_in",
        "description": "Ground Sense pin, to be connected to the ground connection at the load so the reference is sensed at the load."
      },
      {
        "number": "3",
        "name": "ENABLE",
        "type": "input",
        "description": "Enable input: drive high (logic high at least 2 V) to enable the device and low (logic low at most 0.8 V) to put it in shutdown, with enable input current limited to ±1 µA; leaving it unconnected selects normal operation via a weak internal pull-up."
      },
      {
        "number": "4",
        "name": "IN",
        "type": "power_in",
        "description": "Supply voltage input, which must be from VOUT + 0.3 V up to 5.5 V (absolute maximum input voltage -0.2 V to 6 V)."
      },
      {
        "number": "5",
        "name": "OUTS",
        "type": "output",
        "description": "Voltage Reference Sense Output, used to sense the reference voltage at the load together with OUTF."
      },
      {
        "number": "6",
        "name": "OUTF",
        "type": "power_out",
        "description": "Voltage Reference Force Output: short OUTF to OUTS as close as possible to the load and bypass it with 0.1 µF to 10 µF to GND; the output capacitance range is 0.1 µF to 10 µF."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet describes GNDF and GNDS only as ground force and ground sense; the pin types are mappe; The datasheet gives no electrical type for OUTS and OUTF; output types were assigned from the 'Volta; Pin 1 is labeled FILTER on the ZJR1001 variant and pin 2 is GND there; this pinout uses the ZJR1002 "
        ],
        "pages_sent": 21,
        "cost_usd": 0.083,
        "at": "2026-10-18T23:57:34"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590917047130148864",
        "pages": 21,
        "sha256": "eae88a0955204efc",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 6,
        "described": 6,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "zjr1002-9butbr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "c9fe686b4d1b56927a41fa84a9bc1efb61d8a45a123a3db43bcaa05c2891d635",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "zjr1002-9butbr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "1de91a8995c1ea5a48b6020aaddbc2943b6fc460cbfb8929eddffece17111a0c",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}