component
ZJR1002-9BUTBR
Public Made by Adomby adom
ZJW Voltage Reference, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 21d ago |
| viewers | 21d ago |
| package.json | 21d ago |
| page.json | 21d ago |
| README.md | 21d ago |
| zjr1002-9butbr-etched.glb | 21d ago |
| zjr1002-9butbr-etched.step | 21d ago |
| zjr1002-9butbr-hero.glb | 21d ago |
| zjr1002-9butbr-hero.overlay.json | 21d ago |
| zjr1002-9butbr.glb | 21d ago |
| zjr1002-9butbr.kicad_mod | 21d ago |
| zjr1002-9butbr.kicad_sym | 21d ago |
| zjr1002-9butbr.lbr | 21d ago |
| zjr1002-9butbr.step | 21d ago |
ZJR1002-9BUTBR
ZJW · Voltage Reference · SOT-23-6
ZJR1002-9BUTBR from ZJW, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GNDF | power_in | Ground Force pin, the ground connection of the force path for the reference output; the datasheet gives no further electrical limits for this pin. |
| 2 | GNDS | power_in | Ground Sense pin, to be connected to the ground connection at the load so the reference is sensed at the load. |
| 3 | ENABLE | input | Enable input: drive high (logic high at least 2 V) to enable the device and low (logic low at most 0.8 V) to put it in shutdown, with enable input current limited to ±1 µA; leaving it unconnected selects normal operation via a weak internal pull-up. |
| 4 | IN | power_in | Supply voltage input, which must be from VOUT + 0.3 V up to 5.5 V (absolute maximum input voltage -0.2 V to 6 V). |
| 5 | OUTS | output | Voltage Reference Sense Output, used to sense the reference voltage at the load together with OUTF. |
| 6 | OUTF | power_out | Voltage Reference Force Output: short OUTF to OUTS as close as possible to the load and bypass it with 0.1 µF to 10 µF to GND; the output capacitance range is 0.1 µF to 10 µF. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ZJW |
| Package | SOT-23-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Initial Accuracy | -0.05 | 0.05 | % | 6 | |||
| Temperature Coefficient (B Grade) | TCVOUT | 5 | ppm / ° C | ● full specified temperature range; B Grade | 6 | ||
| Line Regulation | 2 | 10 | ppm/V | ● full specified temperature range | 6 | ||
| Load Regulation | 1.5 | 10 | ppm/mA | -10 mA<ILOAD<10 mA; ● full specified temperature range | 6 | ||
| Supply Voltage | 5.5 | V | ILOAD= 5 mA, output voltage error < 0.1% | 6 | |||
| Enable Pin (ENABLE) Input Current | -1 | 1 | µ A | ● full specified temperature range | 6 | ||
| Logic High Voltage | 2 | V | ● full specified temperature range | 6 | |||
| Logic Low Voltage | 0.8 | V | ● full specified temperature range | 6 | |||
| Dropout Voltage | 5 | mV | ILOAD = 0; ● full specified temperature range | 6 | |||
| Dropout Voltage | 50 | mV | ILOAD = 5mA; ● full specified temperature range | 6 | |||
| Short-Circuit Current | IL | 16 | 20 | mA | VOUT = GND/VIN | 6 | |
| Temperature Range (Specified) | -40 | 125 | ° C | Specified Temperature Range | 6 | ||
| Operating Temperature Range (Electrical Table) | -55 | 125 | ° C | 6 | |||
| Supply Current | IQ | 130 | µ A | ● full specified temperature range | 6 | ||
| Shutdown Current | 3 | µ A | ● full specified temperature range | 6 | |||
| Ripple Rejection Ratio | -95 | dB | Frequency = 60 Hz | 6 | |||
| Turn-on Settling Time | 220 | µ s | Stable to 0.1 %, CL = 0.1 µ F | 6 | |||
| Long-Term Stability | -30 | ppm / 1000 hours | 1000 hours, SOT23-6 | 6 | |||
| Input Voltage | -0.2 | 6 | V | Ratings apply at 25 ° C, unless otherwise noted | 5 | ||
| Output Short-Circuit Current to GND | -30 | 30 | mA | 5 | |||
| Operating Temperature Range (Absolute Maximum) | -40 | 125 | ° C | 5 | |||
| Storage Temperature Range | -65 | 150 | ° C | 5 | |||
| Junction Temperature Range | -65 | 150 | ° C | 5 | |||
| Maximum Reflow Temperature | 260 | ° C | 5 | ||||
| Lead Temperature (Soldering) | 300 | ° C | 10 sec | 5 | |||
| Electrostatic Discharge, Human Body Model (HBM) | 8 | kV | HBM | 5 | |||
| Electrostatic Discharge, Charging Device Model (CDM) | 1 | kV | CDM | 5 | |||
| Junction-to-Ambient Thermal Resistance | θJA | 230 | ° C/W | SOT23 package | 5 | ||
| Junction-to-Case Thermal Resistance | θJC | 76 | ° C/W | SOT23 package | 5 |
CAD (KiCad official)
- Symbol:
ZJR1002-9BUTBR - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
zjr1002-9butbr-etched.step/zjr1002-9butbr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);zjr1002-9butbr.step/zjr1002-9butbr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ZJW datasheet (21 pp, sha256
eae88a0955204efc, retrieved 2026-10-19, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).