main
History Download
Ray Publish 0.1.0 c3507d6

ZGAD125D12

Zynalog · Analog To Digital Converters (ADCs) · QFN-64(9x9)

ZGAD125D12 from Zynalog, in a QFN-64(9x9). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in 1.8V analog supply (1.7V to 1.9V per Table 2); bypass to ground with 0.1µF ceramic, and pins 1, 2 and 64 may share one bypass capacitor.
2 VDD power_in 1.8V analog supply (1.7V to 1.9V per Table 2); bypass to ground with 0.1µF ceramic, and pins 1, 2 and 64 may share one bypass capacitor.
3 GND power_in Power ground; the exposed pad on the package underside must be soldered to PCB ground.
4 VinA+ input Channel A differential analog input, positive; drive around VCM (nominal 0.435×VDD) with a differential swing within 1.5Vpp and 180° phase between VinA+ and VinA-.
5 VinA- input Channel A differential analog input, negative; drive around VCM (nominal 0.435×VDD) with a differential swing within 1.5Vpp and 180° phase relative to VinA+.
6 GND power_in Power ground; the exposed pad on the package underside must be soldered to PCB ground.
7 SENSE input External reference input: tie to VDD to select the internal reference (±0.75V input range), or drive with an external reference between 1.2V and 1.3V for a ±0.6×VSENSE input range.
8 VREF power_in Reference voltage output, nominal 1.25V; bypass to ground with a 2.2µF ceramic capacitor.
9 GND power_in Power ground; the exposed pad on the package underside must be soldered to PCB ground.
10 VCM output Common-mode bias output, nominal 0.435×VDD, used to set the analog input common mode; bypass to ground with 0.1µF ceramic.
11 GND power_in Power ground; the exposed pad on the package underside must be soldered to PCB ground.
12 VinB- input Channel B differential analog input, negative; drive around VCM (nominal 0.435×VDD) with a differential swing within 1.5Vpp and 180° phase relative to VinB+.
13 VinB+ input Channel B differential analog input, positive; drive around VCM (nominal 0.435×VDD) with a differential swing within 1.5Vpp and 180° phase relative to VinB-.
14 GND power_in Power ground; the exposed pad on the package underside must be soldered to PCB ground.
15 VDD power_in 1.8V analog supply (1.7V to 1.9V per Table 2); bypass to ground with 0.1µF ceramic, and pins 15, 16 and 17 may share one bypass capacitor.
16 VDD power_in 1.8V analog supply (1.7V to 1.9V per Table 2); bypass to ground with 0.1µF ceramic, and pins 15, 16 and 17 may share one bypass capacitor.
17 VDD power_in 1.8V analog supply (1.7V to 1.9V per Table 2); bypass to ground with 0.1µF ceramic, and pins 15, 16 and 17 may share one bypass capacitor.
18 GND power_in Power ground; the exposed pad on the package underside must be soldered to PCB ground.
19 CLK+ input Differential sampling clock input, positive; conversion starts on the rising edge, and the clock must stay between -0.1V and VDD+0.1V with jitter below 160 fs recommended.
20 CLK- input Differential sampling clock input, negative; conversion starts on the falling edge, and the clock must stay between -0.1V and VDD+0.1V with jitter below 160 fs recommended.
21 GND power_in Power ground; the exposed pad on the package underside must be soldered to PCB ground.
22 OF- output Complementary overflow/underflow digital output; the channel A and channel B overflow flags are multiplexed onto this pair.
23 OF+ output Overflow/underflow digital output; goes high on overflow or underflow, with channel A and channel B flags multiplexed onto this pair.
24 NC unconnected Marked NC on the pin configuration figure; no function is stated in the datasheet.
25 NC unconnected Marked NC on the pin configuration figure; no function is stated in the datasheet.
26 DB0_1- output Channel B DDR LVDS output, complement; carries D0 while CLKOUT+ is low and D1 while CLKOUT+ is high, and each LVDS pair needs an external 100Ω differential termination.
27 DB0_1+ output Channel B DDR LVDS output, true; carries D0 while CLKOUT+ is low and D1 while CLKOUT+ is high, and each LVDS pair needs an external 100Ω differential termination.
28 DB2_3- output Channel B DDR LVDS output, complement; carries D2 while CLKOUT+ is low and D3 while CLKOUT+ is high, and each LVDS pair needs an external 100Ω differential termination.
29 DB2_3+ output Channel B DDR LVDS output, true; carries D2 while CLKOUT+ is low and D3 while CLKOUT+ is high, and each LVDS pair needs an external 100Ω differential termination.
30 DB4_5- output Channel B DDR LVDS output, complement; carries D4 while CLKOUT+ is low and D5 while CLKOUT+ is high, and each LVDS pair needs an external 100Ω differential termination.
31 DB4_5+ output Channel B DDR LVDS output, true; carries D4 while CLKOUT+ is low and D5 while CLKOUT+ is high, and each LVDS pair needs an external 100Ω differential termination.
32 DVDD power_in 1.8V supply for the digital LVDS output drivers (1.7V to 1.9V); bypass each DVDD pin to ground with a separate 0.1µF ceramic capacitor.
33 DGND power_in Ground for the digital output drivers, isolated from the ADC core supply and ground.
34 DB6_7- output Channel B DDR LVDS output, complement; carries D6 while CLKOUT+ is low and D7 while CLKOUT+ is high, and each LVDS pair needs an external 100Ω differential termination.
35 DB6_7+ output Channel B DDR LVDS output, true; carries D6 while CLKOUT+ is low and D7 while CLKOUT+ is high, and each LVDS pair needs an external 100Ω differential termination.
36 DB8_9- output Channel B DDR LVDS output, complement; carries D8 while CLKOUT+ is low and D9 while CLKOUT+ is high, and each LVDS pair needs an external 100Ω differential termination.
37 DB8_9+ output Channel B DDR LVDS output, true; carries D8 while CLKOUT+ is low and D9 while CLKOUT+ is high, and each LVDS pair needs an external 100Ω differential termination.
38 DB10_11- output Channel B DDR LVDS output, complement; carries D10 while CLKOUT+ is low and D11 while CLKOUT+ is high, and each LVDS pair needs an external 100Ω differential termination.
39 DB10_11+ output Channel B DDR LVDS output, true; carries D10 while CLKOUT+ is low and D11 while CLKOUT+ is high, and each LVDS pair needs an external 100Ω differential termination.
40 CLKOUT- output Complementary LVDS data output clock; data transitions are aligned with the CLKOUT edges, and the phase can be shifted 0°, 45°, 90° or 135° via the timing register (requires the duty cycle stabilizer on).
41 CLKOUT+ output LVDS data output clock, true; data transitions are aligned with the CLKOUT edges, and the phase can be shifted 0°, 45°, 90° or 135° via the timing register (requires the duty cycle stabilizer on).
42 NC unconnected Marked NC on the pin configuration figure; no function is stated in the datasheet.
43 NC unconnected Marked NC on the pin configuration figure; no function is stated in the datasheet.
44 DA0_1- output Channel A DDR LVDS output, complement; carries D0 while CLKOUT+ is low and D1 while CLKOUT+ is high, and each LVDS pair needs an external 100Ω differential termination.
45 DA0_1+ output Channel A DDR LVDS output, true; carries D0 while CLKOUT+ is low and D1 while CLKOUT+ is high, and each LVDS pair needs an external 100Ω differential termination.
46 DA2_3- output Channel A DDR LVDS output, complement; carries D2 while CLKOUT+ is low and D3 while CLKOUT+ is high, and each LVDS pair needs an external 100Ω differential termination.
47 DA2_3+ output Channel A DDR LVDS output, true; carries D2 while CLKOUT+ is low and D3 while CLKOUT+ is high, and each LVDS pair needs an external 100Ω differential termination.
48 DGND power_in Ground for the digital output drivers, isolated from the ADC core supply and ground.
49 DVDD power_in 1.8V supply for the digital LVDS output drivers (1.7V to 1.9V); bypass each DVDD pin to ground with a separate 0.1µF ceramic capacitor.
50 DA4_5- output Channel A DDR LVDS output, complement; carries D4 while CLKOUT+ is low and D5 while CLKOUT+ is high, and each LVDS pair needs an external 100Ω differential termination.
51 DA4_5+ output Channel A DDR LVDS output, true; carries D4 while CLKOUT+ is low and D5 while CLKOUT+ is high, and each LVDS pair needs an external 100Ω differential termination.
52 DA6_7- output Channel A DDR LVDS output, complement; carries D6 while CLKOUT+ is low and D7 while CLKOUT+ is high, and each LVDS pair needs an external 100Ω differential termination.
53 DA6_7+ output Channel A DDR LVDS output, true; carries D6 while CLKOUT+ is low and D7 while CLKOUT+ is high, and each LVDS pair needs an external 100Ω differential termination.
54 DA8_9- output Channel A DDR LVDS output, complement; carries D8 while CLKOUT+ is low and D9 while CLKOUT+ is high, and each LVDS pair needs an external 100Ω differential termination.
55 DA8_9+ output Channel A DDR LVDS output, true; carries D8 while CLKOUT+ is low and D9 while CLKOUT+ is high, and each LVDS pair needs an external 100Ω differential termination.
56 DA10_11- output Channel A DDR LVDS output, complement; carries D10 while CLKOUT+ is low and D11 while CLKOUT+ is high, and each LVDS pair needs an external 100Ω differential termination.
57 DA10_11+ output Channel A DDR LVDS output, true; carries D10 while CLKOUT+ is low and D11 while CLKOUT+ is high, and each LVDS pair needs an external 100Ω differential termination.
58 GND power_in Power ground; the exposed pad on the package underside must be soldered to PCB ground.
59 SPI_MISO output SPI readback output in serial mode (MODE=0); open-drain, requiring a 2kΩ pull-up to the 1.8V to 3.3V SPI supply only when registers are read back, and it has no function in parallel mode.
60 SPI_MOSI input SPI data input in serial mode (MODE=0); in parallel mode it selects LVDS drive current, 3.5mA when low and 1.75mA when high at 1.8V to 3.3V logic.
61 SPI_SCLK input SPI clock input in serial mode (MODE=0); in parallel mode a high level (1.8V to 3.3V logic) puts the chip into sleep (AC power down).
62 SPI_CS input SPI chip select in serial mode (MODE=0); in parallel mode a high level (1.8V to 3.3V logic) enables the clock duty cycle stabilizer.
63 MODE input Serial/parallel mode select: tie to GND for SPI mode or to VDD for parallel GPIO mode; it must be hard-wired to GND or VDD and not driven by a logic signal.
64 VDD power_in 1.8V analog supply (1.7V to 1.9V per Table 2); bypass to ground with 0.1µF ceramic, and pins 1, 2 and 64 may share one bypass capacitor.
65 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Zynalog
Package QFN-64(9x9)
Category ADC/DAC/Data Conversion
Pins 65

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VDD analog supply voltage VDD 1.7 1.8 1.9 V 4
DVDD digital supply voltage DVDD 1.7 1.8 1.9 V 4
Integral nonlinearity INL -2 0.6 2 LSB 4
Differential nonlinearity DNL -0.6 0.25 0.6 LSB 4
Offset error Offset Error -13 5 13 mV 4
Gain error Gain Error -4 1 2.2 %FS 4
Digital output differential voltage (3.5mA mode) V_OD 247 350 454 mV 3.5mA 模式下 4
Digital output differential voltage (1.75mA mode) V_OD 125 175 250 mV 1.75mA 模式下 4
Digital output common-mode voltage V_OS 1.125 1.25 1.375 V 4
Clock input to clock output delay tC 1.3 1.6 2 ns VDD=1.8V, DVDD=1.8V, fS=125MHz 10
Clock input to data output delay tD 1.7 2 2.3 ns VDD=1.8V, DVDD=1.8V, fS=125MHz 10
Clock output to data output skew (tC - tD) tSKEW 0.1 0.2 0.55 ns VDD=1.8V, DVDD=1.8V, fS=125MHz 10
VDD, DVDD maximum input voltage range VDD,DVDD -0.3 2 V 6
Analog input voltage range (max VDD+0.2) Analog Vin -0.3 V 6
CLK, SENSE input voltage range (max VDD+0.2) CLK,SENSE -0.3 V 6
SPI/GPIO digital voltage range (min VDD) SPI 3.9 V 6
LVDS data output voltage range (max DVDD+0.2) Data Output -0.3 V 6
Working temperature -40 85 °C 6
Storage temperature -65 150 °C 6

CAD (KiCad official)

  • Symbol: ZGAD125D12
  • Footprint: Package_DFN_QFN:QFN-64-1EP_9x9mm_P0.5mm_EP6x6mm
  • 3D model: QFN-64(9x9) (KiCad packages3D, STEP)
  • 3D model files: zgad125d12-etched.step / zgad125d12-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); zgad125d12.step / zgad125d12.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Zynalog datasheet (19 pp, sha256 6052601f436a55c9, retrieved 2026-11-11, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF